36 files
-
KotOR II Switch Modding Framework
By jacqylfrost
I wondered, why wait a few months for Aspyr to release TSLRCM when you could hack it together in a few days for fun? To that end:
Switch KotOR II Modding romFS Dummy Folder 1.0.1
This is a set of files and folders designed to make modding the Switch version of KotOR II easier and more accessible to a novice user.
Read to the end before using.
You will need a hackable, or modchipped Switch to use this, and custom firmware must be installed, I use Atmosphere, but anything that supports romFS should be fine. If you use something other than Atmosphere you'll have to figure out where it goes, but it should be very similar.
This should work just fine with the digital or physical version (when it is released) without issue. I have only tested this on the most up-to-date build at this time, 1.0.1. I will update this when the next patch is released, and hopefully again when TSLRCM is officially released.
Extract the zip file, and install any mods you want to use, pointing TSLPatcher at the \Localized\English\ folder containing the dialog.tlk file. For mods that don't use TSLPatcher, copy files as directed, "romfs" is equivalent to the directory on PC containing the executable.
NOTE: You may need to move files that TSLPatcher is expecting to the folder to be able to patch them. You can access them by dumping your game with nxdumptool, using romfs. Make sure you include updates when doing so. What I included should be more than sufficient for TSLRCM, however.
NOTE: When you are done, move the override folder to the root of the romfs folder, i.e. the directory with the "swplayer.ini" file.
Feel free to comment with what you needed, and what mod it was for, and if there is popular demand, I will add the files to this pack. The easiest way I found, was just to try installing a mod, and then check the log for errors to see what files were missing.
NOTE: Long filenames cause issues with TSLPatcher, this is exacerbated by the length of the filepath for romFS modding. I recommend moving the "romfs" folder to the root of the drive and patching there, moving the folder back afterwards.
Make sure to check your error log, you may manually need to copy .lip files over to override afterwards.
Move textures (.tga, .txi and .tpc) to override/Textures or they won't apply. NOTE: Aspyr included upscaled textures with this version that are not in other releases of the game. As far as I can tell, they are all in the format the original textures were in, by and large, that means they are in .tpc format, which trumps .tga and .txi files of the same name. If you have issues with a mod's textures not applying, try converting them to .tpc with Xoreos-Tools. You can download my texture reversion mods for K1 and K2 on Switch if you want to see what files are in what format.
At this point, copy the atmosphere folder to the root of your SD card, and you should be done. Please feel free to mention any issues you run into, or workarounds you needed, and I'll update this post.
I tested a run of TSLRCM and Leilukin's Gay Handmaiden mod with great success. I have not tested the Male Exile/Disciple part of that mod, but it should work as well.
Mods that involve UI likely won't work. Everything is at your own risk, you may end up with a broken save, etc. Worst case scenario, you can uninstall all mods by deleting the `0100B2C016252000` folder from `/atmosphere/contents/`
Big thanks to JC for a ton of help troubleshooting, and big thanks to Zbyl2 for helping with TSLRCM-related issues.
7-22-2022 Update:
Just a change to the readme regarding potential texture issues.
187 downloads
-
installer KOTORModSync
By th3w1zard1
Please see http://github.com/th3w1zard1/KOTORModSync for the main repo.
Please report any bugs or problems you encounter. While I test this heavily, it's difficult to find any and all problems when incorporating 200+ mod's instructions across dozens of operating systems and platform combinations. If you happen to notice something odd or out of place, please report them.
KOTORModSync is a multi-mod installer for KOTOR games that makes it easier to install and manage mods.
I usually install the Reddit mod build every year or so. The process takes about an hour and it's repetitive moving files, running tslpatcher, deleting specific files, and occasionally renaming some files. The last time I installed the modbuild I made a mistake on a single different step, 3 times in a row. Most mistakes require a full restart from the beginning. This is tedious, so I decided to create an installer creator in C# to simplify the process.
Goals
Mod creators work really hard on their mods. It's the least we can do to install them and use them, right? However, who wants to reinstall to vanilla and spend several hours reinstalling mods, just to add 1 or 2 extra mods on top of it? Other mod managers I've tried were either too difficult to configure, require significant changes to a hard-to-understand configuration file, or only provided limited functionality for defining new mods. KOTOR mods definitely can have complex dependency relationships with each other in regard to compatibility, due to the nature and age of TSLPatcher.
Usage
If you are an end user just wanting to install some mods, simply load up the instruction files provided, choose the mods you want from the left list and any options, and press 'Start main install' Watch Xuul's tutorial video here: Effortless Modding with Kotor Mod Sync: The Ultimate Guide for Star Wars KOTOR Mods (youtube.com)
If you are a mod developer, this program contains a full-blown instruction editor that'll allow you to quickly create instructions for your mod and define its compatibility with other mods. See Dependencies/Restrictions and InstallBefore/InstallAfter explanation - Pastebin.com for more information. See the video tutorial here: Creating involved instructions for KOTORModSync - YouTube
Features
Can install the https://kotor.neocities.org/ mod builds in about 20 minutes from a vanilla install. Supports TSLPatching on mac/linux without wine! Select the individual mods you want for an install - the dependencies and incompatibilities will automatically be chosen and sorted. This means end users don't have to worry about specific instructions regarding other mods in the list. All the compatibility steps are handled internally by KOTORModSync and the default instructions files provided here. An end user simply can select the mods they want to install in the left list, and any customizations if they like, and simply press 'Install All' to have everything installed automatically. This program has a built-in GUI editor and an installer packed into one. Modbuild creators can create instructions with little to no knowledge of the format and easily share them with end users. End users can install everything from the instruction file with a simple click of a button. Edit any instructions and verify the configuration with built-in tools. Some support to dry run an install. A flexible configuration editor and parser utilizing TOML syntax. This is very user-friendly and similar to INI which TSLPatcher already uses and most modders are used to. Create instructions files with complex dependency structures for multiple mods, and have end users install everything exactly according to the instructions created. No more manually copying/deleting files: KOTORModSync handles all of that for your end user. Platforms
KOTORModSync is a cross-platform 32-bit and 64-bit .NET application. It is compatible with the following operating systems:
Windows 7 and 8: Compatible if running .NET Framework 4.6.2 or higher. Windows 10 and 11: Fully compatible with any Windows release. Linux and Mac: Fully compatible - choose one of the two that match your operating system. Users do not need to download any additional runtimes: everything is self-contained within the application.
Linux
You may need additional X11 libraries. In order to get this working on WSL, for example, I had to install the following packages:
sudo apt install libsm6 libice6 libx11-dev libfontconfig1 libx11-6 libx11-xcb1 libxau6 libxcb1 libxdmcp6 libxcb-xkb1 libxcb-render0 libxcb-shm0 libxcb-xfixes0 libxcb-util1 libxcb-xinerama0 libxcb-randr0 libxcb-image0 libxcb-keysyms1 libxcb-sync1 libxcb-xtest0 Then you can simply run in a terminal like this:
./KOTORModSync If you run into problems with the Linux or Mac builds, please contact me and I'll try to get a fix ready for the next release.
Credit
Snigaroo
This man saved me a countless amount of hours. I'd still be struggling through game glitches and mod-specific instructions I didn't understand. Actually, I'd probably still be on Dantooine trying to determine why I'm getting visual glitches and crashes which he solved with the one-word message 'grass'.
Cortisol
Created HoloPatcher and the PyKotor library that KOTORModSync uses to patch mods. These projects are the main reason KOTORModSync can be supported on Mac/Linux. While the PyKotor/HoloPatcher projects have had some issues, this guy was more or less available for comment if I had questions on how I could fix any remaining problems myself.
JCarter426
There were so many KOTOR-specific things to learn, without his help I'd still be trying to deserialize encapsulated resource files. His time and patience were incredibly useful to the project and this project would be impossible without him.
Testers:
Lewok from r/KOTOR
Thank you for helping test that obnoxious UAC elevation problem legacy Windows apps like TSLPatcher have.
Other notable users
Fair-Strides
Provided the perl source code of TSLPatcher on GitHub, and generally maintained the TSLPatcher project in Stoffe's absence.
Stoffe
Creator of TSLPatcher
Thank you to the entire KOTOR modding community for what you do.
KOTORModSync - Official Documentation.txt
KOTOR1_Full.tomlKOTOR2_Full.toml
KOTOR1_Spoiler_Free.tomlKOTOR2_Spoiler_Free.toml
KOTOR1_Mobile_Full.tomlKOTOR2_Mobile_Full.toml
5,554 downloads
- installing mods
- mods
- (and 8 more)
-
Bao-Dur Head Model Neck Fix
This is a modder's resource that adjusts the position of Bao-Dur's neck vertices so that they match the standard position of other heads. Bao-Dur's vanilla head will "float" if attached to standard bodies. This adjustment ensures the base of his neck will seat properly with the collars of standard body models, which is a necessity for potential future mods like Bao-Dur specific robes.
You are free to incorporate the contents of this mod into your own work, as long as proper credit is provided. Do not redistribute the mod by itself.
1,148 downloads
-
Missing K1 Party Member Ports for TSL [Modder's Resource]
By Leilukin
MODDER'S RESOURCE FOR STAR WARS: KNIGHTS OF THE OLD REPUBLIC II: THE SITH LORDS
This modder's resource includes models and textures of Jolee, Juhani, Mission and Zaalbar that are ported from KotOR 1 to be usable in KotOR 2: TSL. I have also included character templates (in UTC format) for them, allowing you to spawn them as NPCs in your mod.
This resource is made because Jolee, Juhani, Mission and Zaalbar never make any physical appearance in TSL, thus their textures and models do not exist within TSLs game files. However, both appearance.2da and heads.2da of TSL, including vanilla, still include entries for these characters, so if you want to make them appear as NPCs in TSL, there is no need to create extra entries for them in said 2DA files.
PERMISSION:
This modder's resource is free to use in any mod you create or release. Credit is appreciated, but not required.
CREDITS:
Cortisol for Holocron Toolset bead-v for MDLEdit221 downloads
-
[TSL] Lost Modules Pack
By InSidious
Not really a mod, more of a modding resource. Here I've gathered the 7 most useful
'lost' modules for KotOR 1 - that is, modules that had no .rim files, and were essentially
just room models in the game files. Why do I say 'most useful'? There are a few more -
one of which is a slice of corridor, and several bits of the Unknown World temple-top,
but none of these are much different or much more useful than the already existing modules,
or the ones I have packaged here. Neither are they particularly exemplary.
And so, here they are. I would guess that the modules' functions would be:
In 2006-7, I found a variety of 'lost' modules in KotOR I, which I released as a pack.
This consisted mainly of areas for which area models, walkmesh and lightmaps existed
in the game files, but no module file. I complied these for use.
Shortly aftewards I found around three others for TSL, which I intended to release
around the time of my release of another mod of mine. The mod got delayed, and I
forgot about the lost modules for a long time, until reminded by VarsityPuppet.
Unlike the KotOR I set, these don't appear to have been made for areas which were
then unused, but were probably for test effects, or similar purposes. They are:
000test - Empty, box-shaped room. The camera clips through the walls, like it
does in most custom modules.
000trl - Small, empty area with a foggy floor. Perhaps has something to do with
the main menu, when completed by a character with the Sith Lord prestige
class?
999dia - Very large, flat plane, with walkmesh and lighting. Perhaps a test?
Usage and credit
I make no claim over usage - you may create and upload your own versions of this mod
however and wherever you like - but please credit me appropriately.
Please also do not upload or claim credit for an unmodified version of this mod elsewhere.
It's just rude.
180 downloads
-
NPC Auto-Leveller
By Fair Strides
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
» NPC Auto-Leveller 1.0 Read-Me
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
NAME: NPC Auto-Leveller
TYPE: Modder's Resource
VERSION: 1.0
DATE RELEASED: July 2, 2017
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
» DESCRIPTION
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
A while back, Darth Tyren was asking me about how the KotOR 2 balances the enemies to make them tougher as you go on through the game. We then spent a few hours running some tests and digging through the files, with the end result being that the game seems to just upgrade the enemies' Hit Points and Force Points.
I then theorized that one could use the extra functions Obsidian added for modifying your skills, attributes, feats, and force powers to work up a framework for levelling up the NPCs without actually assigning them levels. This is the result of that work.
The heart of this modder's resource is the "fs_level.nss" #include file, where I've one main function called LevelUp and several support functions that will randomly assign feats, force powers, skill points (including support for cross-class skills), and attribute points at the appropriate times and in the appropriate amounts. I've scoured the various .2da files and the all of the default values and rules that the player has to obey are obeyed by the script as well.
Also, there are 750 .uti files included. There are 50 for each class, and each item handles the defense, saving throw, and attack modifier increases that a given class would get as they level. These items are not accessible or equippable in-game, as they use the hidden creature slots (specifically, slots 14 and 15).
I've shown how to use the #include file in the included "k_ai_master.nss" in the source folder. The compiled form is included in the installation.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
» INSTALLATION
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
An installation which involves the TSL Patcher has been made ready for your use and is the simplest and easiest way to carry out installation.
You don't have to use the installer if you're just using parts of this or adapting it, but it's an easy way to get it all set up and ready to go.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
» KNOWN BUGS
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Not exactly a bug, but the two slots I used may very well be used by animals like the Kinrath that have special properties to their attacks.
There are 2 ways to report bugs:
1: Post your issues in the Bug Reporting Thread.
2: PM your issues to Fair Strides at Deadlystream.
TO REPORT THROUGH PM
1) Go to DeadlyStream ( http://deadlystream.com/ ) and search for the user Fair Strides ( http://deadlystream.com/forum/user/9107-fair-strides/ )
2) Send a private message with as much detail as possible of what is occurring in your game. He will likely report back to you within a week.
TO REPORT THROUGH THE BUG THREAD:
1) Go to the Bug Thread ( http://deadlystream.com/forum/topic/5509-downloadnpc-auto-leveller/ )
2) Reply with as much detail as you can provide, and please list (and preferably link to) all the mods you're using.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
» CONTRIBUTORS / CREDITS
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Darth Insidious, Malkior, Markus Ramikin, Darth Tyren, and probably many others who were willing to discuss the topic with me over Skype.
Darth Tyren for the initial investigative work and the idea itself.
90SK for some installer help on my Fumble! mod, whose changes.ini file I edited in Notepad for this mod.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
» REDISTRIBUTION
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This mod may be re-distributed, but may not be re-uploaded. I request that proper credit be given to me for making the mod, even if you use parts of the mod instead of the whole thing.
I would also like to be contacted before you release your mod.
217 downloads
-
Kel Dor Modder's Resource for TSL
NOTE TO ENDUSERS – THIS IS NOT INTENDED AS A PLAYABLE MOD!
This pack is a modder’s resource containing a custom Kel Dor head and modified body models with Kel Dor hands. This installer will perform a basic heads.2da and appearance.2da NPC row setup along with simple body variation UTCs for testing purposes. An on-enter script that spawns the UTCs next to the Ebon Hawk on Dantooine is provided in the TEST SCRIPT folder. Simply copy and paste the two NCS files into your Override folder.
Textures are provided with a basic placeholder diffuse for the head and a simple UV map for the hands. Because of the single texture requirement for variants, the hands have to share UV space with the body. This necessitated altering the UV layouts for all body models, compressing them 50% to make use of 1024x512 textures (original 512x512 body texture side-by-side with 512x512 hand texture). As such, the bodies are not compatible with third party textures/reskins. However, all models and textures use unique names, so there should be no conflicts/incompatibilities.
The head model has basic skin weights. The respirator mask has been weighted to the jaw to give it some movement during NPC dialogue, but possibly this may be a bit extreme. You may wish to experiment with your own adjustments to the skin weights, although it should be fine as-is for a player head, as they don't have any major jaw animation.
You are free to incorporate the contents of this mod into your own work, as long as proper credit is provided. Do not redistribute the mod by itself. Although note that this model is basically superfluous now that porting from TOR is allowed.
211 downloads
-
TSL Thigh-High Boots For Female Twi'lek Body (Modder's Resource)
Here's another bit of scrap from my junk pile that someone may find a use for. A little while back I made some thigh-high boots for Bastila when Quanon was working on her Taris prisoner outfit. He didn't end up using them, so I tossed them into the abyss with my other rejects. The other day I was looking at the female Twi'lek body models for some reason, and I noticed that (the base version at least) has painted on thigh-high boots. On a whim, I imported my boot mesh and noted that, height-wise, they lined up almost perfectly. Even more interestingly, my UVs were very close in layout to the Twi'lek's legs, so much so that is was fairly trivial to rejig them to fit the existing textures. In practice I'm not sure how much purpose this serves, as from a distance it's basically impossible to tell the difference between painted on boots and my physically modelled boots, at least using vanilla textures, but I figured someone might find some use for it.
Because the vanilla female Twi'lek model has existing animations (dancing), I have provided a hex edited copy of the original which is now used as the supermodel. That way the booted variant is a simple Override drop-in with no 2DA editing required. Also included is a booted version of the Twi'lek assassin body. Additionally, I have also provided a version suitable for use as a player body that uses the regular S_Female03 supermodel.
I've supplied modified versions for those variation textures that don't have existing boot textures. There is also an optional variant of the base green variation which has black boots instead of red. The intent of course, given how terrible the vanilla textures are, is that someone will release a proper high quality retextured version, but the NPC portion is useable out of the box if people so desire.
You are free to incorporate the contents of this mod into your own work, as long as proper credit is provided. Do not redistribute the mod by itself.
As a side note for anyone using this directly rather than as a modder's resource, I would highly recommend the use of the optional alternate texture from RedRob41's Luxa Hair Fix mod. What can I say? I like hotpants. Only use the texture, mind, not the meshes.
23,422 downloads
-
Vanilla M4-78 Textures Upscaled Twice
By Effix
The vanilla M4-78 textures upscaled twice with A.I. software waifu2x-caffe.
I've left out the txi files that only had "xbox_downsample 256", those were left overs from the old Xbox version.
DRO_Ehok.tga is the Ebon Hawk exterior, specific for the droid planet. If you prefer another version of the Hawk's exterior then you may want to replace it.
I've included upscaled versions of 2 CM files that some of the txi's call upon.
Requested by some old guy on an obscure website.
544 downloads
-
Modder's Resource: Harbinger Model
By tjsase
Hello!
This is a 3D model of the Harbinger that I extracted from KotOR II. Only half of it was present (as you only see half at Peragus) so I mirrored and stitched the model symmetrically.
This package also contains an alternate model of the Harbinger, in which I bent or removed some of the turrets to make it look like it has been war-torn.
Besides the models, I've included the original .tga texture as well as some alternate textures I made to make the ship look war-torn. This includes a color map, and incandescent map, a bump map, and a specularity map.
Any one is free to use this resource in their products. Enjoy!
288 downloads
-
Upgradeable Swoop Bike (Incomplete mod)
By bead-v
for Star Wars: Knights of the Old Republic II: The Sith Lords
by bead-v
Description:
This is an incomplete mod. I have uploaded it for someone to finish it or use its parts and do their own thing with it. This installer will set up what was finished. After installation, you can load a save from before going to Nar Shaddaa, find a Twi'lek there who will sell you a swoop bike, then race with it on Telos and Nar Shaddaa. The swoop bike will appear on your ship, and you can access the the Upgrade Screen. However, upgrades are unobtainable. To acquire them, cheat or mod them into the game.
Cheat codes:
giveitem s_a_bespin
giveitem s_a_megaracer
giveitem s_a_sorosub
giveitem s_a_ultra9
giveitem s_e_aratech
giveitem s_e_gtrack
giveitem s_e_incom
giveitem s_e_rlift
giveitem s_f_advance
giveitem s_f_bonded
giveitem s_f_experiment
giveitem s_f_reinforce
Installation:
Run TSLPatcher.exe.
Uninstallation:
To stop the Twi'lek from appearing, delete the following file from your override folder:
- k_301_ref3
To completely remove the files installed by this installer, check the tslpatchdata folder and delete all the corresponding files in the override and Modules folders inside your game folder. Then take all the files from backup and put them back where they belong (.mod files go to Modules, everything else to override).
Thanks:
Fred Tetra: Kotor Tool
Stoffe: TSLPatcher, ERF/RIM Editor, TalkEd
JdNoa & Dashus: DeNCS
Chuck Chargin Jr: mdlops
tk102: DLGEditor, K-GFF GFF Editor
Permissions:
You may do whatever you want with these files for your own personal usage. If you repackage or redistribute them, either by themselves or as part of a another mod, please give credit to the author.
Contact:
Send me a personal message on www.deadlystream.com. My username is bead-v.
THIS MODIFICATION IS PROVIDED AS-IS AND IS NOT SUPPORTED BY BIOWARE/OBSIDIAN ENTERTAINMENT OR LUCASARTS OR ANY LICENSERS/SPONSORS OF THE MENTIONED COMPANIES. USE OF THIS FILE IS AT YOUR OWN RISK AND THE ABOVE MENTIONED COMPANIES OR THE AUTHOR IS NOT RESPONSIBLE FOR ANY DAMAGE CAUSED TO YOUR COMPUTER FOR THE USAGE OF THESE FILES.
193 downloads
-
KOTOR 2 Editable Executable
By Snigaroo
This file is a hex-editable KOTOR 2 executable for use in widescreen patching. The file was originally produced by Squ1zZy, and therefore DeadlyStream offers no technical support for the file or its use.
9,195 downloads
-
tool KotorDiff
By th3w1zard1
A simple CLI to easily compare KOTOR file formats.
This is a very simple CLI to PyKotor. If you find TSLPatcher isn't patching the resulting files in the way you want, you can use this tool to compare your manual changes to the resulting TSLPatcher result. You can also use it to compare entire installations, directories, or single files.
Why KotorDiff?
It is (or should be) common knowledge that Kotor Tool is not safe to use for anything besides extraction. But have you ever wondered why that is?
Let's take a look at a .utc file extracted directly from the BIFs (the OG vanilla p_bastilla.utc). Extract it with KTool and name it p_bastilla_ktool.utc. Now open the same file in ktool's UTC character editor, change a single field (literally anything, hp, strength, whatever you fancy), and save it as p_bastilla_ktool_edited.utc.
KotorDiff's output:
Using --path1='C:\Users\nodoxxxpls\Downloads\p_bastilla_ktool_edited.utc' Using --path2='C:\Users\nodoxxxpls\Downloads\p_bastilla_ktool.utc' Using --ignore-rims=False Using --ignore-tlk=False Using --ignore-lips=False Using --compare-hashes=True Using --use-profiler=False GFFStruct: number of fields have changed at 'p_bastilla_ktool_edited.utc': '72' --> '69' Field 'Int16' is different at 'p_bastilla_ktool_edited.utc\HitPoints': --- (old)HitPoints +++ (new)HitPoints @@ -1 +1 @@ -18 +24 Field 'LocalizedString' is different at 'p_bastilla_ktool_edited.utc\FirstName': --- (old)FirstName +++ (new)FirstName @@ -1 +1 @@ -Bastila +31360 Field 'Int16' is different at 'p_bastilla_ktool_edited.utc\CurrentHitPoints': --- (old)CurrentHitPoints +++ (new)CurrentHitPoints @@ -1 +1 @@ -20 +24 Field 'UInt16' is different at 'p_bastilla_ktool_edited.utc\FeatList\0\Feat': --- (old)Feat +++ (new)Feat @@ -1 +1 @@ -3 +94 Field 'UInt16' is different at 'p_bastilla_ktool_edited.utc\FeatList\2\Feat': --- (old)Feat +++ (new)Feat @@ -1 +1 @@ -39 +98 Field 'UInt16' is different at 'p_bastilla_ktool_edited.utc\FeatList\3\Feat': --- (old)Feat +++ (new)Feat @@ -1 +1 @@ -43 +55 Field 'UInt16' is different at 'p_bastilla_ktool_edited.utc\FeatList\4\Feat': --- (old)Feat +++ (new)Feat @@ -1 +1 @@ -44 +107 Field 'UInt16' is different at 'p_bastilla_ktool_edited.utc\FeatList\5\Feat': --- (old)Feat +++ (new)Feat @@ -1 +1 @@ -55 +3 Field 'UInt16' is different at 'p_bastilla_ktool_edited.utc\FeatList\6\Feat': --- (old)Feat +++ (new)Feat @@ -1 +1 @@ -94 +39 Field 'UInt16' is different at 'p_bastilla_ktool_edited.utc\FeatList\7\Feat': --- (old)Feat +++ (new)Feat @@ -1 +1 @@ -98 +43 Field 'UInt16' is different at 'p_bastilla_ktool_edited.utc\FeatList\8\Feat': --- (old)Feat +++ (new)Feat @@ -1 +1 @@ -107 +44 Field 'LocalizedString' is different at 'p_bastilla_ktool_edited.utc\Description': --- (old)Description +++ (new)Description @@ -0,0 +1 @@ +-1 Field 'String' is different at 'p_bastilla_ktool_edited.utc\Subrace': --- (old)Subrace +++ (new)Subrace @@ -1 +0,0 @@ -0 ^ 'p_bastilla_ktool_edited.utc': GFF is different ^ --------------------------------------------------- 'p_bastilla_ktool_edited.utc' DOES NOT MATCH 'p_bastilla_ktool.utc' Sheesh! I bet you can't even guess which field I modified! Again I changed a singular field! What is all this nonsense that KTool did to my character sheet?
Moral: Don't use KTool to modify files. It seems to have the incorrect field types defined internally and doesn't respect the original file when saving a new one.
But KotorDiff saved the day here and outputted exactly what happened on save.
How to use:
Simply run the executable. It'll ask you for 3 paths:
PATH1 Path to the first K1/TSL install, file, or directory to diff.
PATH2 Path to the second K1/TSL install, file, or directory to diff.
OUTPUT_LOG File name/path of the desired output logfile (defaults to log_install_differ.log in the current directory)
If you point PATH1 and PATH2 to two KOTOR installs, it will ONLY compare the Override folder, the Modules folder, the Lips folder, the rims folder (if exists), the StreamWaves/StreamVoices folder, and the dialog.tlk file. This was a design choice to improve how long the differ takes to finish. This includes any subfolders within the aforementioned folder names.
Supported filetypes/formats:
TalkTable files (TLK) Any GFF file (DLG, UTC, GUI, UTP, UTD, GIT, IFO, etc) Any capsule (ERF, MOD, RIM, SAV, etc) Not supported: NCS, NSS, ITP
Any file format that's not supported will have its SHA256 hash compared instead.
CLI Support:
This is a very flexible tool. You can send it command line arguments if you would like to use it in a 3rd party tool. Run `kotordiff.exe --help` to get a full syntax. If there's an error, the exit code will be 3 (if err is known by my code) or 1 (some sys error loading the tool). If the two paths match, the exit code will be 0. If the two paths don't match, exit code will be 2. You can utilize these error codes to utilize KotorDiff in a customized 3rd party script, or add-on to WinMerge/WinDirStat, possibilities are endless.
FAQ:
I am struggling to read the diff output, why is it saying +/-/@38924 and what does it mean?
A: GIT Diff is a standardized output format that has been widely adopted and used since probably the 80s/90s. https://stackoverflow.com/a/2530012/4414190 is by far the best explanation i've seen, but honestly ask ChatGPT to explain it further if needed, or send me a pm if something doesn't make sense!
Couldn't I just open my two files with Holocron Toolset/ERFEdit/K-GFF etc?
You could, but for me it became tedious to manually compare them side by side, expanding every node etc. Leave alone completely multiple files. This tool allows you to simply input two paths and have the full differences outputted and logged.
A main benefit is it'll show you the exact GFF paths that differ. Output such as `Missing struct: "EntryList\5\RepliesList\3" {contents of the struct}` has been very useful.
Why is my antivirus is flagging this?
This is a false-positive and there's nothing I can do. Python source scripts are compiled to executables using PyInstaller, but unfortunately some antivirus's have been known to flag anything compiled with PyInstaller this way. The problem is similar to why your browser may warn you about downloading any files with the .EXE extension.
This whole tool is open source, feel free to run directly from the source script: https://github.com/NickHugi/PyKotor/blob/master/Tools/KotorDiff/src/kotordiff/__main__.py
There's a well-written article explaining why the false positives happen on their issue template: https://github.com/pyinstaller/pyinstaller/blob/develop/.github/ISSUE_TEMPLATE/antivirus.md
TLDR: PyInstaller is an amazing tool, but antiviruses may flag it. This is not the fault of PyInstaller or my tool, but rather the fault of how some scummy users have chosen to use PyInstaller in the past. Please report any false positives you encounter to your antivirus's website, as reports not only improve the accuracy of everybody's AV experience overall, but also indirectly supports the PyInstaller project.
Source code:
https://github.com/NickHugi/PyKotor/blob/master/Tools/KotorDiff/
Credit:
@Cortisol for creating the PyKotor library (i.e., 90% of the code for this tool)
42 downloads
-
Sith Academy Missing Rooms
By Thor110
NOTE : This was made specifically for the Expanded Galaxy Project but I decided to release a modders resource version.
This is intended for anyone that wishes to add the Library & Teachers Quarters rooms from TSL to the first game, the rubble has been removed and an empty level is included that just contains the assets that are present in the second game so they can be used as reference.
I added the missing beds to the teachers quarters and the spotlights under the doors to both rooms and made a number of small edits to the models.
There are a few small changes, such as the computers not being broken and each placeable now uses a string from the first games dialog.tlk ( Bag, Computer, Door, Footlocker ) as does the map note waypoint.
I have also used the .pth file from 702kor for this version of the level.
The .are & .ifo file are identical to those within korr_m35aa
The .git file contains just the doors, placeables, sounds and a single waypoint for the Library.
There is an expanded and a light .vis file, the expanded .vis file more closely resembles the TSL version and enables you to see lights from distant rooms and the light version more closely resembles the K1 version the expanded version is in the override by default.
------------------------------------------------------------------------------------------------
Installation:
Copy Modules & Override folder to the game directory.
Warp to m35aa to look around the level.
There is an installer specific version for anyone who wishes to install the empty rooms to the game for a regular playthrough.
------------------------------------------------------------------------------------------------
Thanks to DarthParametric for fixing the walkmesh in the Teachers Quarters.
Thanks to PapaZinos for fixing the UV and lightmap issues with the added geometry. ( I am waiting for these updates and will update this file when they are ready )
Used KotOR Tool, Blender, MDLEdit-v1.0.4, GIMP and Notepad++ to make this.
19 downloads
-
Dejarik Table Placeable
By newbiemodder
"Let the wookie win."-- C-3PO
Here is a new placeable I created for one of my own mods. I just took a standard table from the game and replaced the table top with a dejarik game top texture. There is a separate model file for the game pieces.
The .zip file contains all the necessary files. Just unpack and follow the ReadMe.
Hope you can use it.
Enjoy
newbiemodder
305 downloads
- dejarik
- newbiemodder
- (and 2 more)
-
Lethisk Freighter AKA I-Wing Placeable Modder's Resource for TSL
This is a new mesh made from scratch to replicate the I-Wing shuttle/freighter from K1, the model for which was not included in TSL's files. It was made with the intention to replace the GWing shuttle that the Mandalorians use to take you to Onderon, but it could be used in other ways. It currently includes no texture, just a UV map, so you'll need to make your own texture to make much use of it. Includes ASCII and binary model and walkmesh/collision files.
Free for anyone to use and include in their own mod releases, but you must acknowledge the source. The mesh may not be released by itself or otherwise rehosted elsewhere.
139 downloads
-
JC's Loadscreen Template for K2
By JCarter426
This is a template for the K2 style loadscreens. Included are a PNG overlay which you can place directly over your loadscreen background, as well as the PSD source. Note that the aspect ratio is 1:1, so the image will be stretched depending the display resolution. That's how the game's original loadscreens are.
101 downloads
-
portraits All PC And Party Portraits (Modders Resource) (TGA)
All PC and Party member portraits in TGA format. Use as a base for your own portraits or whatever else you need them for.
You don't need to credit me if you use this, but it would be appreciated.
I recommend GIMP or Paint.net for editing TGA's.
163 downloads
-
.thumb.png.12ca216fa35b80ec7c6e7f7f7cf81499.png)
TSL Removed Mouth Cubes (Modder's Resource)
Per request, this is a modder's resource to fix unused models in TSL that had the "mouth cube" problem, AKA tongue tip dummies unintentionally set to render.
I have also included a model for Jedi Malak with his "mouth cube" fixed. Not to be confused with my Malak Mouth Fix mod, the model in this download has no further changes.
What's Included
Jedi Malak (Full body): n_jedimalek.mdl/mdx
Sith Governor/Apprentice (Head): sith_app.mdl/mdx
Atris (Darth Traya variant) (Full body): n_darthtraya.mdl/mdx
Credits
Fred Tetra, Kotor Tool
bead-v, MDLedit
Disclaimer
This modder's resource is not supported by LucasArts, BioWare, or Obsidian Entertainment. It is intended to be used by other members of the KOTOR modding community & intends no copyright infringement.
Contact me on DeadlyStream or via Discord (listed on my DS profile) if you have any questions, comments, suggestions, or the like. Feel free to use these files however you want, this is a resource & no permissions are necessary.
141 downloads
-
Modder's Resource - HARIII's Coruscant Level Models
By 90SK
Modder's Resource - HARIII's Coruscant Level Models
by HARIII
These models are thematically of Coruscant, there is documentation of what has been done and they are not fully finished into modules, they need walkmesh, uvmapping for the majority, lightmaps, etc.
The model work for 29 levels has been completed.
This includes in depth the Jedi Temple interior and exterior.
This is a developer's resource for modelers and level designers.
If used, credit HARIII; additional modeling by Darth Tyren and Hunters Run, and the textures in the archive were created by 90SK
122 downloads
-
Restored Enclave Sublevel
By PapaZinos
This is a modders' resource -- not intended for general use. It includes alternate versions of the four submodules in the enclave sublevel from TSL that had damage baked into their room models, now restored to their pre-bombing condition. That includes removing rubble, replacing flickering/dead lights, and cutting back on vegetative overgrowth. Lightmapping looks good too. I've exported the models in both K1 and TSL formats, default is TSL because I made this for Thor110's Expanded Galaxy Project, but K1 versions are in a subfolder.
I've also included a VIS file for the module which is a merge of Thor110's additions for Visibility File Fixes with new edits of my own, particularly to compensate for the removal of some rubble in the rotunda with the glass dome which at least partially obscured submodules getting unloaded. I would use the exact same VIS even for the vanilla module, though.
Usage:
Just add the included models to your mod project. I did include versions for K1 ports, which you can find in the "K1" subfolder. Don't forget the VIS. You don't need to ask for permission to use these, just give credit in the description/readme.
Included Files:
Acknowledgments:
Thanks to seedhartha for making modeling for these games simple using KotORBlender, and Cortisol for making file extraction easy with the Holocron Toolset.
I would also like to thank Thor110 for buffing up the module's vis for his Visibility File Fixes mod, and allowing me to include those edits in this version. I also want to shout-out his Expanded Galaxy Project, the reason I made these in the first place.
This modification is not supported by Obsidian Entertainment, Lucasarts, Disney or any licensers/sponsors thereof. Use of this modification is at your own risk and neither the aforementioned companies nor the author may be held responsible for any damages caused to your computer via this modification's usage.
44 downloads
-
Airtaxi speeders placeables Modder's Resource
By LoneWanderer
Description:
This modder's resource contains 6 air taxi speeders (5 from Star Wars: The Old Republic and 1 created by Viktor Trisjin), each with diffuse and normal map textures. It also contains an AI-voiced protocol taxi droid with a simple custom texture (taxi logo added) and an example dialogue file for him.
If you want to use Airtaxi_lp model in your mod, then you must mention that the model was created by Viktor Trisjin and is licensed under Creative Commons Attribution.
Acknowledgments:
Thanks to DarthParametric for his help and advices.
Airtaxi_lp model was created by Viktor Trisjin (https://skfb.ly/ozoLM) and is licensed under Creative Commons Attribution (http://creativecommons.org/licenses/by/4.0/).
Disclaimer
THIS MODIFICATION IS PROVIDED AS-IS AND IS NOT SUPPORTED BY BIOWARE/OBSIDIAN ENTERTAINMENT, LUCASARTS, DISNEY OR ANY LICENSERS/SPONSORS OF THE MENTIONED COMPANIES. USE OF THIS FILE IS AT YOUR OWN RISK AND THE ABOVE-MENTIONED COMPANIES OR THE AUTHOR IS NOT RESPONSIBLE FOR ANY DAMAGE CAUSED TO YOUR COMPUTER FOR THE USAGE OF THIS FILE.
12 downloads
-
Bao-Dur arm texture for his default clothes
By FF97
Hello everyone,
This is a modder's resource that is maybe useful for those who want to retexture Bao-Dur's arm and don't want to mess around to get the two seperate textures (P_bao_durA and P_baodur_arm) look the same. Now, the default model of Bao-Dur also uses the P_BaoDur_Arm texture for his arm.
72 downloads
(0 reviews)0 comments
Updated
-
Module Templates for v0.4.0 Full Update
By Thor110
These are the files required to recreate the modules in the v0.4.0 Full Update Release of the K2 Expanded Galaxy Project.
Please do not re-distribute these files without permission, if you use them to create your own modules please strip them down to bear essentials for the modules in your project and do not re-distribute the templates without modification.
Thor110
89 downloads
(0 reviews)0 comments
Submitted
-
Ui_Icons_Swtor
By Magnetiicz
This contains UI elements that are found so far there are 25 PNG images.
199 downloads
(0 reviews)0 comments
Submitted