Leaderboard

In the vanilla game, Yavin Station is the only location that does not have a proper hangar where the player can walk to and from the Ebon Hawk. This mod adds one that generally matches the original landing and takeoff cutscenes, although I have taken a few artistic liberties. You may notice that, as with the original cutscenes, it looks remarkably similar to the Ahto City hangar on Manaan. I can only assume that the same architect worked on both projects. The hangar comes in two variants: with and without a visible forcefield effect over the hangar entrance. By default, the forcefield is invisible. To change between the visible and invisible forcefields, see the INSTALLATION instructions below. Aside from adding the new hangar, I have also made a few additional edits to the station: - Changed the stars to use a different, less-repetitive vanilla star texture. - Fixed some questionable geometry at the main observation window. - Edited the walkmesh by the observation window to correct a glitch where the player could teleport into space, originally documented by the KOTOR 1 Community Patch (K1CP). (This mod's walkmesh fixes were made from scratch and do not reuse any K1CP material.) - Added a proper load screen for the station. (New for version 1.4) - Added corridor geometry behind the various locked doors, in place of the original 2D backdrop. (New for version 1.4) IMPORTANT: To experience the new hangar, you will need a save from before visiting Yavin Station for the first time. ALSO IMPORTANT: If you are upgrading from version 1.3 or earlier, a new save is also recommended to avoid issues with the lighting on the new airlock doors. Thank you for downloading, and I hope you enjoy this mod! ------------------------------------------------------------------- INSTALLATION Run INSTALL.exe, and follow the prompts. If you have other mods installed, it is normal to see a warning that liv_m99aa.mod already exists and has been skipped. If you are using "High Quality Cockpit Skyboxes" by Sithspecter, see below for additional instructions. By default, the forcefield at the hangar entrance is invisible. To add a visible forcefield effect, run INSTALL.exe again after finishing the main installation, and select "Optional: Add Visible Forcefield". If you have previously installed version 1.3 or earlier of this mod, you can upgrade by installing directly over the old version. Note, however, that you may need to reinstall any other mods which affect Yavin Station (specifically, any mods that edit m50aa.git). Version 1.4 changes the appearance of the added airlock doors so that they look less like the Sith base doors. If you prefer the appearance from version 1.0, copy the files in the folder "Option - Alternate Airlock Door (v1_0)" into Override. ------------------------------------------------------------------- COMPATIBILITY This mod is incompatible with other mods that edit the area geometry of Yavin Station. Reskins are technically compatible, but depending on how drastic they are, they might look strange with a few new textures from this mod. If you are using a reskin of the Ebon Hawk's exterior, see the instructions below. This mod is compatible with the Kotor 1 Community Patch (K1CP). It has not been tested with the KOTOR 1 Restoration (K1R) or the K1 Yavin IV Planet Mod, but I do not expect any significant compatibility issues. For best results, install this mod after K1CP or K1R and before any other mods that alter Yavin Station. If you are using any mods that change the station's load screen (i.e. "Loadscreens in Color" by Sithspecter), install them after this one. If they use .tga files, you will need to delete this mod's version of "load_liv_m99aa.tpc" from Override manually. ------------------------------------------------------------------- HIGH QUALITY COCKPIT SKYBOXES If you are using "High Quality Cockpit Skyboxes" by Sithspecter (which I highly recommend), I have included compatible skybox textures matching my new hangar. After installing the cockpit skyboxes, perform the following steps: 1. Open the folder "HQ Cockpit Skybox Textures" from this mod. 2. Copy the TPC files corresponding to the desired quality into your Override folder. 3. If present, delete the following files from Override: - ebo_yab.tga - ebo_yaf.tga - ebo_yal.tga - ebo_yar.tga - ebo_yat.tga If you are using the alternate airlock door option, also copy the appropriate version of "ebo_yaf.tpc" from the "Alternate Airlock Door" folder into Override, overwriting if asked. "High Quality Cockpit Skyboxes" may be found at https://deadlystream.com/files/file/938-high-quality-cockpit-skyboxes/ ------------------------------------------------------------------- EBON HAWK RESKINS To use a reskin of the Ebon Hawk's exterior with the new hangar, perform the following steps: 1. Make extra copies of "LSF_EHawk01.tga" and "LSF_EHawk01.txi" (if present) from the reskin, and rename them as "yvh_ehawk.tga" and "yvh_ehawk.txi", respectively. 2. Open the new "yvh_ehawk.txi" with a text editor, and change the entry after "envmaptexture" or "bumpyshinytexture" to "CM_WK_YAVHGR". 3. Copy both files into your Override folder. 4. Delete "yvh_ehawk.tpc" from your Override folder. ------------------------------------------------------------------- CREDITS MDLedit and KOTORmax by bead-v KotorBlender by seedhartha tpcview and tga2tpc by ndix UR NWNSSCOMP by Torlack, stoffe, and tk102 DeNCS by JdNoa and Dashus K-GFF by tk102 TSL Patcher by stoffe and Fair Strides ERFEdit by stoffe and Fair Strides Kotor Tool by Fred Tetra New textures and models were based on existing KOTOR material by Bioware. Camera angle for the load screen was inspired by "Loadscreens in Color" by Sithspecter (https://deadlystream.com/files/file/916-loadscreens-in-color/). Special thanks to: - DarthParametric for suggesting the visible forcefield effect, providing an example from K1CP, and providing feedback on the result. Also for providing feedback on my new corridor extensions for version 1.4. - muitafruita for reporting that the Ebon Hawk was missing its venting sound. - Thor110 for encouraging me to create a new door texture that looks less like a knockoff of the Sith base doors. ------------------------------------------------------------------- VERSION HISTORY 1.0 - Initial Release 1.1 - Added an option for a visible forcefield effect 1.2 - Added particle emitters at the ends of the visible forcefield 1.3 - Fixed the sound effect of the Ebon Hawk venting in the hangar 1.4 - Created a new texture for the airlock doors - Added a new load screen for Yavin Station - Added corridor geometry behind the various locked doors - Edited airlock door frames to improve seal - Revised particle emitter settings and UV mapping for the visible forcefield option - Consolidated and rearranged lightmaps - Made various minor walkmesh and model improvements - Edited module .vis file to optimize performance - Added scripting code to prevent party members from being accidentally locked outside the airlock ------------------------------------------------------------------- DISCLAIMER AND PERMISSIONS This modification is provided as-is and is not supported by Disney, Lucasarts, or Bioware. Use at your own risk. The author shall not be held responsible for damage to your game installation, computer, or saved games resulting from the use of this mod. This mod shall not be reposted, in whole or in part, on any sites other than Deadly Stream without the author's permission. Assets from this mod shall not be redistributed in other modifications without the author's permission.

A Mod for Star Wars Knights of The Old Republic Authors: N-DReW25, Effixan and Constantinople33 1.0.0 Release Date: 08.05.2022 Installation: 1) Install JC's Fashion Line I: Cloaked Hybrid Robes for K1 FIRST! (No exceptions!!!): https://deadlystream.com/files/file/1758-jcs-fashion-line-i-cloaked-hybrid-robes-for-k1/ 2) Install Effixan's Qel-Droma Robes Reskin SECOND!: https://deadlystream.com/files/file/2019-effixians-qel-droma-robes-reskin-for-jcs-cloaked-jedi-robes/ 3) Open the "For Override" folder and copy the files within to your swkotor Override folder and select the "Overwrite" option when it pops up. Description: March 11th 2021 saw the release of the Lore-Friendly Qel Droma Robes by Constantinople33 which was a 2K resolution reskin of the vanilla K1 Jedi Robe texture to make the Qel-Droma Robe item look more like the canonical Robe as worn by Qel-Droma in the Kotor Comics. I personally thought the skin looked AMAZING with its extensive detail, but at the time I used JC's Cloaked Jedi Robe mod so I took no heed to the mod as both mods were incompatible. But upon looking into JC's Cloaked Hybrid Robe mod, I realized that it would be possible to "merge" Constantinople33's work with one of JC's Cloaked Jedi Robe skin to make a "Hybrid" robe. At first, I was intending to use Salk's Qel-Droma Robe texture (which was uploaded by StellarExile) as the Cloaked texture of my Hybrid mod, but after my initial work on the Hybrid Robe the modder Effixan published his own take on a unique Qel-Droma Cloaked Robe. From what I can tell, Salk had requested Effixan to professionally make his version of Qel-Droma's Cloaked Robe using Salk's work as an inspiration... as such, after getting permission from Constantinople33 and the fact Effixan stated in his readme that users can use his Qel-Droma Robe with credit, I have merged the Lore-Friendly Qel-Droma Robe with Effixan's Qel-Droma Robes Reskin mod. Known Bugs: This mod shouldn't have bugs, but if there any please report them on Deadlystream.com Incompatibilities: Report any unknown incompatibilities to me on Deadlystream.com Permissions: Do NOT claim credit for this mod and do not use assets from this mod without my permission. To use Constantinople33's texture in your mod, please ASK HIM for permission as it is his original work! Thanks: Constantinople33: For making the original Lore-Friendly Qel-Droma Robes! Effixan: For creating his own Qel-Droma Cloaked Robe texture which was used in this mod! Salk: The one responsible for the design of the Qel-Droma Cloaked Robes! Bioware: For such an amazing game Fred Tetra: For Kotor Tool And everyone who downloads the mod! Legal: THIS MODIFICATION IS NOT SUPPORTED BY BIOWARE/OBSIDIAN ENTERTAINMENT, LUCASARTS, DISNEY OR ANY LICENSERS/SPONSORS OF THE MENTIONED COMPANIES. USE OF THIS FILE IS AT YOUR OWN RISK AND THE ABOVE-MENTIONED COMPANIES OR THE AUTHOR IS NOT RESPONSIBLE FOR ANY DAMAGE CAUSED TO YOUR COMPUTER FOR THE USAGE OF THIS FILE.

While working on the K1CP I discovered that there are actually three different Sith soldier textures. There's the red and the silver that we're all used to, but there's also a white one that is unused. This restores the white texture into the game. You have the option to either make the standard troopers white and the elite/command troopers silver, or vice-versa. INSTALL: Run the installer and select either Main OR Alternate. I recommend installing this AFTER the KOTOR 1 Community Patch and JC's Korriban: Back in Black if you use them. PERMISSION: I give anyone permission to do whatever the heck they want with this, whether or not they give me credit. (Although credit is always nice, y'know?)

*********************************** Knights of the Old Republic *********************************** TITLE: Ebon Hawk Camera Replacement AUTHOR: LDR FILENAME: ebon_hawk_camera FILESIZE: 3 KB -------------------------- INSTALLATION INSTRUCTIONS -------------------------- Simply put the 2da file and the vis file into the Override folder in the KotOR directory. To uninstall, remove the 2da file and the vis file from the Override folder in the KotOR directory. ------------ Permissions ------------ You may not use any assets of this mod in your own mod without first contacting me (and Darth Parametric). ------------ DESCRIPTION ------------ Changes the Ebon Hawk camera to where it reduces the zoom on the player, akin to the "default" camera. ----- BUGS ----- None I hope. If you find any please post them in the comments. I will address them as soon as I can. -------------- COMPATABILITY -------------- So long as there isn't another mod that makes edits to the camerastyle.2da or m12aa.vis, there shouldn't be any mod conflicts with K1R or any other KotOR 1 mod. Note: there will be a hard incompatibility with any other mod that edits the m12aa.vis file. It can only be resolved with manual merging, since TSLPatcher doesn't allow for dynamic patching of VIS files (or LYTs). ------- Credits ------- Darth Parametric for his m12aa.vis file that fixed an issue where some Ebon Hawk rooms weren't visible due to the increased camera radius. Fred Tetra for his very useful KotOR Tool. Fair Strides. All of you who downloaded this mod! Thank You!

Summary This mod adjusts the wearable Mandalorian armor items to make their appearances consistent with that of other Mandalorians in the game and to fix various other oddities associated with them. The main part of the mod concerns the Class 9 Mandalorian armors (Mandalorian Battle Armor, Mandalorian Heavy Armor, and Mandalorian Assault Armor). These items will now follow the usual blue/red/gold ranking system. There are two options for this: With Option A, the armors use the Class 9 model. Mandalorian Heavy Armor and Mandalorian Assault Armor are given new textures, recolored red and gold variants of the Mandalorian Battle Armor. With Option B, the armors act as disguise items, giving the wearer one of the NPC Mandalorian appearances. Both options also include the following: Class 9 Mandalorian armors have new icons to match their appearance with each option Class 8 Mandalorian Armor has a new icon with the correct appearance (previously it looked purple) The Mandalorian helmet plot items have new icons to match their appearances (previously they were both blue, even though neither was dropped by a blue Mandalorian) The Mandalorian Commander on Kashyyyk drops Mandalorian Heavy Armor to match his red appearance (also, I believe this item couldn’t be found anywhere in the game before) Finally, there is a third Extra Textures option with texture overrides for the NPC Mandalorians (and disguise appearances). They tone down the shaders a bit, matching what I did with my Shader Fixes for K2. They can be installed alongside Option A or B. Installation Run Mandalorian_Armor_K1.exe. Select which version to install. a) With Option A, Class 9 Mandalorian armors are recolored to match their usual ranking system (blue/red/gold). b) With Option B, Class 9 Mandalorian armors act as disguise items, giving the wearer one of the NPC Mandalorian appearances (blue/red/gold) with full body armor. Click "Install Mod" and select your game directory (default name SWKOTOR). The Extra Textures can be installed alongside either Option A or B. If you want to install these, run the EXE again, select the Extra Textures option, then install to your game directory as before. Uninstallation Remove the installed files or replace from backups if necessary. Compatibility This mod replaces the unused PFBH07/PMBH07 texture variations and uses plot usable item variation 111. Some users have experienced side effects after prolonged exposure to disguise items. It may result in a character's appearance being permanently changed. There is no confirmed prevention method at this time, but it can be treated via editing the save game file. If Option A is installed, it will overwrite any other alterations to the Mandalorian Assault Armor. Currently, TSLPatcher cannot remove nodes from files, so a hard edit was necessary to remove the disguise property. Permissions I hereby grant nobody except myself permission to upload some or all of this mod anywhere for any reason. For any reason. If you would like to include any part of this mod in anything, then please contact me for permission. Credits KOTOR Tool – Fred Tetra TSLPatcher – stoffe K-GFF – tk102 KOTORMax – bead-v NWMax – Joco tga2tpc – ndix UR Disclaimers FOR MANDALORE!!!!!!! Donations If you enjoy my mods and would like to show your support in a monetary manner, you may do so via PayPal with this donation link. For various legal and ethical reasons, this is entirely optional and is not a requirement to downloading or using any of my mods. I also do not create specific mods for hire. I make mods as a hobby and will most likely do so regardless of any donations or lack thereof, but modding does take up a lot of my time and every bit helps.

======================================================== KNIGHTS OF THE OLD REPUBLIC SOURCE FILE ======================================================== New_Lightsaber_Blade_Model_K1_v1 ================================= Author: Crazy34 Contact: PM me on Deadlystream For: K1 Date: 03/02/2021 ================================= DESCRIPTION: The vanilla lightsaber blades in Kotor and TSL look bad in my opinion. So, I tried to improve them by adding a dynamic ambient light to the blade (environmental lightning), which works quite well. Since this is hard-coded in the model I also optimized the blade plane models to have a different UV layout inspired by Sithspecter's work. I also simplified their geometry and fixed the different brightness bug (different brightness of the blade when viewed from the front compared to the back). Additionally, I included 3D models for the core of the blade and the inner glow of the blade, which can now be used to create black core sabers as seen in SWTOR. The glow - as well as the models - are fully animated to work as the vanilla blades. The hilts are updated together with the blades including hilts from Kaidon Jorn's SLM 2.0 mod. Summary: - All saber hilts are updated with hilts from Kaidon Jorn SLM 2.0 mod (I love it!) All credits for the hilt models, textures and icons go fully to him! - Ambient light for lightsabers - 3D models for blade core and inner glow - Symmetric lightsaber blade planes with a modified version of Sithspecter's crossguard saber UV layout. (Compatible with his unstable textures also included with all credits going to Sithspecter.) - Black core sabers are possible - Homogeneous brightness of the blade (no more “brighter blades when viewed from the front” happening any more) - All sabers are fully upgradeable (added black core and unstable crystals as well as crossguard versions of them) How to use the new lightsabers: Get the black core, unstable and crossguard sabers or crystals by cheating them by using the giveitem command or use KSE to include them in your inventory. The item codes are organized as follows: Lightsaber and crystal follow the standard naming scheme: Black core: 51-60 Unstable: 21-30 Crossguard: 101-110 Crossguard, black core: 111-120 Crossguard, unstable: 91-100 For example: giveitem u_l_colo_51 (Blue, Black core crystal) giveitem u_l_colo_92 (Red, unstable crossguard crystal) giveitem g_w_lghtsbr118 (Viridian, crossguard unstable lightsaber) giveitem g_w_dblsbr025 (Purple, unstable double blade lightsaber) giveitem g_w_shortsbr53 (Green, black core short lightsaber) For the TSL colors such as Viridian, Silver, and Bronze; you can get the crystals with the following giveitem codes. giveitem u_l_colo_07 (Silver) giveitem u_l_colo_09 (Viridian) giveitem u_l_colo_10 (Bronze) !!!! Important: If you put a crossguard crystal in either a short lightsaber or double blade lightsaber the crystal will be transformed into its normal non crossguard version! I HOPE that in the future some talented texture artist will create better looking blade textures using these new blade models. I plan to upload a Modders Resource explaining the blade system in detail. CREDITS: Kaidon Jorn: Lightsaber Hilts models and textures and icons are created by Kaidon Jorn and taken from his SLM 2.0 mod, which you can find here: https://deadlystream.com/files/file/551-schematic-lightsaber-mod-slm/ Thank you very much for the permission to use your models and hilts here. They are amazing and I enjoyed working with them. Sithspecter: The new layout for the lightsaber blades plane models are inspired by Sithspecter's animated Crossguard Lightsabers mod for KOTOR which can be found here: https://deadlystream.com/files/file/1314-crossguard-lightsabers/ Thank you very much for the permission to include your animated unstable blade texture and to modified them to include the new TSL colors. ___________________________________________________________ COMPATIBILITY: It should pretty much be compatible with any mod that doesn't use the same crystal and lightsaber model slots. However, please notify me in the release thread if any bugs do appear that are not listed below.) ___________________________________________________________ INSTALLATION: Use the TSLPatcher multiple times. You can choose which lightsabers you want. So, for example say you are only interested in the normal saber update and the related crossguard sabers: Then install the standard saber first and second run the TSLpatcher again and install the crossguard sabers. The crossguard sabers require to have their related non-crossguard sabers installed first. The TSLPatcher is set up to only install a certain part of the mod and requires multiple runs to install all sabers. It should install everything correctly. UNINSTALL: Navigate to the backup folder and place the contents into the Override folder. Remove all files from the tslpatchdata folder of this mod from your override folder. ___________________________________________________________ BUGS: The tip of the blade has a spike which comes from a deformation of the lightsaber planes. This is also present in the original model. I was not able to find a fix. (Sorry about that.) The lightsaber hilts will clip through the blades. (Unfortunately, DarthParametric has said that it is not possible to fix this.) ___________________________________________________________ PERMISSIONS: You may use this mod as you see fit. Display it in screenshots, make it compatible with your mod. However, do please give credit where it's due, and DO NOT release it with any of your mods without my permission. If you have any ideas for improvements, or if you want to you can mod them yourselves and include them in the mod. Saves me time and I'll give you credit for what I put in. ___________________________________________________________ THANKS: Fred Tetra: All the thanks for KotOR Tool. TK102: All the thanks for K-GFF. ndix UR: All the thanks for the kotorblender plugin, which I used to create the blade 3d models. bead-v: All the thanks for Mdledit and constantly updating it. Without it this mod would not be possible. Thanks also for the comments on the ascii code. Kaidon Jorn: All the thanks for giving me the permission for using the hilts textures and icons. With these included this is a real mod. Thank you so much. Sithspecter: All the thanks for giving me the permission to include his animated blade textures and to modify them. Also i want to thank you for inspiring me to start modding KOTOR in the first place. Jorak Uln: All the thanks for the constant feedback, suggestions and beta testing of the preliminary versions of the mod. JCarter426: I want to thank him for providing information regarding lights in KOTOR and the documentation. DarthParametric: I want to thank him for answering all my questions and being so helpful when creating and tuning of the models. Sith Holocron: For minor proofreading of the mod documents. For the initial feedback on the ambient light, I want to thank: DarthVarkor, Stormie97, ebmar. Also, I want to thank all the modders out there whose work I've consistently studied and learned from. ___________________________________________________________ LEGAL: THIS MODIFICATION IS PROVIDED AS-IS AND IS NOT SUPPORTED BY BIOWARE/OBSIDIAN ENTERTAINMENT, LUCASARTS, DISNEY OR ANY LICENSERS/SPONSORS OF THE MENTIONED COMPANIES. USE OF THIS FILE IS AT YOUR OWN RISK. NEITHER THE ABOVE MENTIONED COMPANIES NOR THE AUTHOR ARE RESPONSIBLE FOR ANY DAMAGE CAUSED TO YOUR COMPUTER FOR THE USAGE OF THIS FILE.

In the vanilla version of the game there was a quest on Manaan which inolved you becoming a lawyer for an ex-Republic soldier who had supposedly murdered a Sith. This, if you followed it far enough, would eventually lead you to investigating around the embassies of both the Republic and the Sith. When you found some evidence, it was presented in the form of text, though referred to as a video by said text. I have taken this text and turned it into a video (a cutscene) showing the events which the text described.

A Mod for Star Wars Knights of The Old Republic Author: N-DReW25 1.2.0 Release Date: 13.06.2024 Installation: Please install the K1 Community Patch (K1CP) first and, if you intend to use it, install the Restored Content for the K1 Community Patch (RC-K1CP) after K1CP and before this mod. Simply click on the HoloPatcher.exe, select your option (read about this below!), click install and sit back and watch the installer do its magic. Description: After you kill Calo Nord, a messenger named Senni Vek will deliver you a datapad telling you to meet Hulas on Manaan. In the vanilla game, that's the last you ever heard from Senni. But whilst searching through the game files, I discovered during the final fight with Hulas our good old friend Senni was supposed to fight along Hulas against you, however, his NPC was replaced with the appearance and nametag of a generic yellow Rodian who, oddly enoug, still used the Twi'lek soundset. As of version 1.2 of this mod, this mods has two different versions to choose from. These versions are... Senni Vek Restoration: This mod restores Senni Vek to the fight by replacing the generic yellow Rodian, exactly how Bioware originally intended. Senni Vek's Ambush: This mod replaces Hulas with Senni Vek. Senni Vek will now take Hulas' place as the big bad boss fight with Hulas' original Rodian audio being replaced with Twi'lek audio and his dialogue rewritten so that it's from the perspective of Senni Vek and not Hulas. This alternative version is for those who believe it was stupid for Hulas to decide to fight the player right after gaining control of the GenoHaradan Guild. In this version, it is heavily implied that Hulas sent Senni Vek and the other hunters to kill the player, and when the player defeats them Hulas will then disappear for the duration of the game as he consolidates his power in the shadows. Known Bugs: This mod shouldn't have bugs but if there is Just PM me on Deadlystream. Incompatibilities: Please report any incompatibilities! Senni Vek Restoration is already part of RC-K1CP, so there's no point installing that option. Senni Vek's Ambush is designed with RC-K1CP in mind, if you already have RC-K1CP or Senni Vek Restoration installed the Senni Vek's Ambush mod will convert the tat_senni.utc file from Senni Vek into the generic yellow Rodian whilst also changing Hulas into Senni Vek, it should be impossible to have two Senni Vek's if you install the mod correctly! Permissions: Do NOT claim credit for this mod and do not use assets from this mod without my permission. Thanks to: Leilukin: For prompting me to update this mod! Sniggles: For requesting Senni Vek's Ambush and for maintaining the Kotor Mod Builds! DarthParametric: For assisting me with replacing the Journal Entries! Bioware: For such an amazing game! Fred Tetra: For Kotor Tool! th3w1zard1: For HoloPatcher! Everyone who downloads the mod! Legal: THIS MODIFICATION IS NOT SUPPORTED BY BIOWARE/OBSIDIAN ENTERTAINMENT, LUCASARTS, DISNEY OR ANY LICENSERS/SPONSORS OF THE MENTIONED COMPANIES. USE OF THIS FILE IS AT YOUR OWN RISK AND THE ABOVE-MENTIONED COMPANIES OR THE AUTHOR IS NOT RESPONSIBLE FOR ANY DAMAGE CAUSED TO YOUR COMPUTER FOR THE USAGE OF THIS FILE.

This mod issues a minor improvement for Lashowe's and Shaleena's heads in KOTOR so that the upper teeth are no longer hidden while talking. Shaleena's head will not be affected by this mod unless you are using KOTOR 1 Restoration, K1 NPC Overhaul, or any other mod that restores her unique appearance. Installation & Uninstallation To install this mod, drag the files in 'Override' to the override folder located in your game's directory. To uninstall this mod, delete the files listed at the end of readme.rtf from your game's override folder. Compatibility & Known Issues This mod should be compatible with any retextures for these heads but not mods that affect the same model files. Credits Fred Tetra, Kotor Tool bead-v, KOTORmax & MDLedit Autodesk, 3ds Max Disclaimer This mod is not supported by LucasArts, BioWare, or Obsidian Entertainment. It is for personal usage only & intends no copyright infringement. Questions, etc.? Contact me on Deadly Stream or via the unofficial KOTOR Discord if you have any questions, comments, suggestions, or the like. If you want to use this mod as a part of an external work, you must receive my permission. This mod should only be found on Deadly Stream or Nexus Mods. No user may upload it to another modding site.

Based on this request thread, this mod replaces the Jedi captive placeables used in the final confrontation with Darth Malak aboard the Star Forge. In the vanilla version of the game, these are all identical copies of the same male body using the PMHC04 (“Mullet Man”) head. New male and female versions of this placeable have been made, utilising a variety of heads from all three human races, and Twi’leks. All eight captives in the level are now unique and distinct from one another. Additionally, the flavour pop-up text for when you interact with the captives has been altered to change the male pronouns into neutral ones, so they work regardless of the subject’s gender. For those that wish it, an optional extra is included that adds these new Jedi as background NPCs to the Jedi Enclave on Dantooine (N.B. as of v1.1, the pictured sparring circle has been removed due to the placeables.2da row limit bug described below). Known Issues: WARNING: A critical issue has been discovered with K1's placeables.2da, limiting the number of additional new entires that can be added to around 20 rows. This mod adds 8 rows. If you use multiple mods that add new rows to placeables.2da, you will likely encounter issues. DO NOT REINSTALL THIS MOD OVER A PREVIOUS VERSION! You will create the placeable overflow issue. In order for the Dantooine portion of the optional extra to take effect, you must use a save prior to leaving Taris. The courtyard portion will only take effect for saves prior to being allowed to exit the Academy. These additions are purely cosmetic, so their absence will have no material affect on the primary purpose of the mod. The core content of the mod will only work with a save prior to entering the final room on the Star Forge, but I assume (hope) most people aren't still installing mods that late in proceedings. Compatibility: The mod is compatible with K1CP. Make sure you install K1CP first. The core content of the mod should be compatible with most other mods, as the changes are restricted to the second-last module in the game (STA_M45AD). The optional content makes changes to the Dantooine Enclave's landing pad (DANM13) and courtyard (DANM14AA) modules. If you are using any mod that overwrites those modules (like Kainzorus Prime's NPC Overhaul Mod), make sure you install that mod first. This mod will patch its changes into pre-existing module files, so should be installed last. Changes in 1.2.1 should mean the Twi'lek master in the optional Dantooine content is now impervious to further hostile robe takeover attempts. If you use @JCarter426's "Fashion Line I - Cloaked Jedi Robes for K1" mod, you can download the supplied compatibility patch to have him wear the TSL robes. If you use @JCarter426's "Fashion Line I - Cloaked Hybrid Robes for K1" mod, you can download the supplied compatibility patch to have him wear the hybrid robes. Acknowledgements: Thanks to @Kexikus for providing code for the NPC OnHeartbeat scripts. Thanks to @jc2 for the suggestion on how to fix the sparring circle combatant health bars. Thanks to @JCarter426 for suggesting the NotReorienting creature flag and for the TSL ported robe assets. Thanks to @bead-v for KOTORMax and MDLEdit. Thanks to @ndix UR for MDLOps v1.0+ and TGA2TPC. Thanks to @StellarExile for pointing out the issue with VFX targeting the base of the model. I must be blind... Thanks to @todevuch for testing the hybrid robes compatibility patch. Thanks to @olegkuz1997 for pointing out that the placeables didn't use TLK StrRefs for their labels. Thanks to @Alice Reyneke for pointing out that pathfinding for the placeables was broken by a previous update.

Based on this request thread, this mod attempts to inject a bit of extra variety into one of the minor elements of KOTOR. It makes some changes to the locked kolto tank room in Zelka Forn’s medical clinic in Upper City South on Taris. In the vanilla version of the game, the room has two placeable square kolto tanks, the floating bodies in which both use the PMHC04 (“Mullet Man”) head. For this mod, those were removed and the room model was edited to add two additional round kolto tanks, which match the ones along each side of the room. Additionally, the glass of the tanks had its texture replaced with one of the other variants in the game that is a bit darker and uses an environment/cube map for a hint of reflection. The empty tanks in the preceding room (behind Zelka Forn) were also edited for consistency. For the sanity of those with OCD, the position of the wall light at the back of the tank room was adjusted so it aligns with the centreline of the room. The floating body model from the kolto placeable was replaced with a new one with clean geometry at the neck join to facilitate using any player or NPC head. Additionally, an all-new female body variant was added, posed to roughly match that of the original male version. Two of these new body variants replaced the original two at the end of the room, with a number of additional bodies placed in the tanks along each side of the room. Zelka Forn’s dialogue when you enter the room for the first time seems to indicate that there should be more present than just the two originally depicted in the vanilla game. Due to limitations on the number of possible placeables K1 can deal with, outlined here by ndix UR, the floating bodies are now part of the room model. Installation: The mod includes a TSLPatcher installer for Windows users. Those on Linux or Mac should replace it with the appropriate HoloPatcher version which will run natively on their OS. Known Issues: This mod relies on editing the Taris Upper City South module's GIT (tar_m02ac). As such, it will not be compatible with any save in which you have previously entered the Upper City South level. Given that is the very first level you enter after leaving the starting apartment on Taris, that means you'll typically need to start a new game to utilise this mod. Per some of my posts in the original request thread, I initially experienced some issues with the tank’s glass texture affecting lighting on the body models (and even outright visibility in one instance) depending on the player’s viewing angle. I believe this has been resolved, but it’s possible the problem may still occur on hardware/OS combinations that I have no way of testing. The floating bodies use these player head models. There is no provision for dealing with a clone of the head the player is using now that the mod has switched to incorporating the bodies into the room model. A future update may replace these heads with NPC heads instead. Compatibility: Edited versions of both room models for the medical facility (M02AC_02G & M02AC_02H) are required for this mod, so will not be compatible with any other mod that edits those models. They still use vanilla textures however, so they will be compatible with texture mods. The mod will not be compatible with any mod that edits the two entries for the original tank placeables in the module’s GIT (Placeable List entries 0 and 22). It should otherwise be compatible with other mods that alter the Upper City South module, as long as they utilise a properly set up TSLPatcher configuration. Since it has come up in the comments, Kainzorus Prime's NPC Overhaul Mod is compatible, but ONLY if you install it before installing this mod (KP's mod will forcibly overwrite any and all module files, so install it before anything). Acknowledgements: Thanks to bead-v for KOTORMax and MDLEdit, and ndix UR for MDLOps 2K18 Edition, all of which were required at various points to get this to work. Thanks to ndix UR for many and various discussions and troubleshooting regarding models, compiling, textures, etc. Thanks to Dark Hope for the suggestion to change the bubble VFX.

This mod replaces the vanilla and/or the installed Republic Soldier texture with the new shade-specularity tweaked version. # Background # The way I see it; the vanilla and/or already present Republic Soldier texture lacks some shading and reflection particularly on its trim, so I thought adding ones would somehow enhance its appearance. # About this Mod # Inside this mod are 6 options of new shade and specularity tweaked Republic Soldier texture in TPC format: [Main] New Shade for Male NPC Republic Soldier [Option-1] Vanilla version for JC's "Republic Soldier Fix for K1" - Male and Female * [Option-2] Vanilla Version Model - Female NPC Republic Soldier [Option-3] New Shade for JC's "Republic Soldier Uniform for PC" - Male and Female * [Option-4] Vanilla version for JC's "Republic Soldier Uniform for PC" - Male and Female * [Option-5] New Shade for JC's "Republic Soldier Fix for K1" - Male and Female NPC Republic Soldier * * Option 1, 3, 4 and 5 requires JCarter426/JC's "JC's Republic Soldier Fix for K1" to be installed first. # Final Remarks # There's always room for improvements - critiques, comments, suggestions, questions and feedbacks for the next update are much appreciated - PM, write them on my feed or leave any on the mod's page as you please. And thank you! for downloading, and playing this mod. Hope you enjoy the mod as much as I do! Installation: I suggest you to manually removes any TGA/DDS and TXI instances of the relevant files [if there're any] from the 'Override' folder. And then - run the installer [TSLPatcher.exe], and hit the [Install Mod ->] button! Uninstallation: remove the installed files from the 'Override' folder or replaces them with the files stored in the 'Backup' folder [if generated] Compatibility: this option will be compatible with JCarter426's "JC's Republic Soldier Fix for K1" as long as this mod was installed after the said mod has. With any mods that is using the same name for the assets and/or potentially overwrite this mod, no compatibility is guaranteed Redistribution: if you want to redistribute the mod - just go with it. Though less likely I will provide supports to any other place than DeadlyStream. If you are to re-use an assets to a project you will be releasing, you don't have to ask for permission - but your generous intention is very much welcome. I'd love to know what others are up too, particularly if my work are included. And then, make sure to credit BioWare & LucasArts with the release - particularly with the inclusion of the assets. An appreciation to this lil' peasant work here is also a very warm welcome, welcome. Credits: The Almighty Force which gave me chance to finish the mod BioWare & LucasArts for developing one of the best RPG I've played DarthParametric for past-present knowledge which allows me to create customs and for all the outstanding creation that I am a fan of JCarter426 for "JC's Republic Soldier Fix for K1" release; as without his mod - most of these contents would not have been possible Snigaroo/Sniggles for hosting #mod_development on Discord > r/kotor, and especially for making me revisit this mod for an update Salk for the input to include additional before-after screenshots Fred Tetra for the amazing KotOR Tool ndix UR for tga2tpc DrMcCoy for xoreos-tools' "xoreostex2tga" stoffe for the magnificent TSLPatcher, and Fair Strides for later improves it Notepad++team for Notepad++ All the Tool Makers wasn't mentioned - can't make it without y'all! All the inspiring streamers on DeadlyStream All the inspiring modders either active or inactive DeadlyStream for being a home; a place to hangout - to discuss and hosting my work DeadlyStream staffs for tirelessly improving and maintaining the site -eb

///// 01. Intro ///// Pazaak! The game whose name I misspell nearly every time I type it. Anyway, the cards are looking pretty dated these days so here’s a higher resolution version. ///// 02. Background ///// These actually started as a much larger project (that I fully intend to finish), but since I had the cards done, I figured I might as well release them. ///// 03. Install ///// Drag 'em to your override folder. These shouldn't conflict with anything. Note: For those of you who prefer the green cards from TSL, you’ll find that variant in the “green” folder. Just overwrite the originals. ///// 04. Uninstall ///// Remove the files. ///// 05. Disclaimer ///// Distribute, have fun, edit, whatever. I only ask that you don't claim this as your own. ///// 06. Thanks ///// ebmar, DarthParametric, Sith Holocron, Kexikus, JCarter426, djh269, A Future Pilot, LDR

The main purpose of this mod is to fix many of the party models that have uvw errors. Some of these errors may be too small to see in-game, but most become glaring when using some of the HD texture mods here on this site. The only HD texture that I have included here, is for Bastila Shan's head model (P_BastilaH04) which is now 2048x2048 pixels. I have tried to remain true to her original look. The models that I have fixed, and are included, are: default clothes models for Bastila Shan Canderous Ordo Carth Onasi Jolee Bindo Juhani Mission Vao HK-47's whole body model head models for Bastila and Carth HD head texture for Bastila head texture for Jolee (to fix the mustache) two additional clothes textures for Carth Each of these character's files can be used separately, so that the user has the option of mixing and matching with other mods. Many of the screenshots are animated with before/after scenes that flip every 7 seconds. There are included text files with much more detail as to what has been fixed in each. There are also a few files included that other modders can use for helping their own texture mods (some uvw maps and a few Photoshop psd files with multiple layers already separated).

This mod will replace and update Canderous texture files. It keeps the same look, but adds in more details. The work involves Quanons textures. The head has not been published. It contains materials from another author. I can send it in a personal message.

This mod changes the visual effects for all the laser blasts in the game. Energy blasters, ion blasters, disruptors, bowcasters - I've replaced them all. Except sonic, because really, sonic? In general, I've added more detail and made them match what's depicted on film as best as I could, when there was a visual reference. I took screenshots of the movies and got out my eyedropper tool and everything. The cores of the lasers are brighter so they look more like lasers, instead of having the whole thing as one flat color. I also messed around with light objects so each laser will illuminate surrounding objects in the appropriate color. For disruptors, I've included three color options: white, green, and yellow. The default install is white, like the original, and the other two are included as optional things.

Summary Almost everybody on Korriban wears the standard bland Sith officer uniform. This mod alters the look of almost everybody on the planet so they're dressed more appropriately. Czerka workers wear Czerka uniforms, Sith troopers wear Sith armor, Dark Jedi wear Dark Jedi robes. While I was going through all the files I noticed some other oddities and corrected them – things like missing items or misplaced files. See the change log for a full list of changes. Installation Note: It is recommended that you uninstall any previous versions of this mod before installing a new version. Extract files from the downloaded archive. Run Korriban_Back_in_Black_K1.exe. Select which version to install. If you have the KOTOR Community Patch installed, choose the KOTOR Community Patch-Compatible Installation option. Otherwise, choose the Basic Installation option. Click "Install Mod" and select your game directory (default name SWKOTOR). There are additional options for Uthar, Yuthura, and Tariga that you may install after the rest of the mod is installed. Uninstallation Remove the installed files or replace from backups if necessary. Compatibility This mod may be compatible with but will overwrite other mods that alter the appearance or equipment of characters on Korriban. It's safest not to use it with any other mod that alters the same characters. Some of the changes will take effect immediately, but for best results you should install this mod before visiting Korriban for the first time in your game. Credits KOTOR Tool – Fred Tetra TSLPatcher – stoffe, with updates by Fair Strides DeNCS – JdNoa & Dashus ERFEdit – stoffe, with updates by Fair Strides K-GFF – tk102 NWNSSCOMP – Torlack, stoffe, & tk102 Permissions I hereby grant nobody except myself permission to upload some or all of this mod anywhere for any reason. For any reason. If you would like to include any part of this mod in anything, then please contact me for permission. Disclaimers OBSIDIAN IS THE NEW BLACK. DON'T WEAR BIOWARE AFTER LABOR DAY. Donations If you enjoy my mods and would like to show your support in a monetary manner, you may do so via PayPal with this donation link. For various legal and ethical reasons, this is entirely optional and is not a requirement to downloading or using any of my mods. I also do not create specific mods for hire. I make mods as a hobby and will most likely do so regardless of any donations or lack thereof, but modding does take up a lot of my time and every bit helps.

A Mod for Star Wars Knights of The Old Republic Author: N-DReW25 Release Date: 26.08.2016 Release Date 1.1: 10.10.2018 Installation: Simply Copy and Paste or Drag and Drop ALL the files within the "For Override" into your Star Wars Knights of The Old Republic override folder Uninstallation: Remove or Delete the files from your Star Wars Knights of The Old Republic override folder Description: In the Hidden Bek Base, their is a door labelled "Control Room" which cannot be unlocked, unlike the security doors that can be unlocked once you decide to finish a certain quest dark side. I found this annoying as the Control Room's interior is on the module loading screen, what this mod does is restore the Control Room and a small bit of Restored Content. This is less of 'cut content' and more of 'broken content' as I have reason to suspect this door was working on the Xbox version Known Bugs: This mod shouldn't have bugs but if there is Just PM me on Deadlystream. Incompatibilities: Would be incompatible with anything that edits "tar11_lockdoo001.utd" Permissions: Do NOT claim credit for this mod Thanks: Bioware for such an amazing game Fred Tetra for Kotor Tool and everyone who downloads the mod. Legal: THIS MODIFICATION IS NOT SUPPORTED BY BIOWARE/OBSIDIAN ENTERTAINMENT, LUCASARTS, DISNEY OR ANY LICENSERS/SPONSORS OF THE MENTIONED COMPANIES. USE OF THIS FILE IS AT YOUR OWN RISK AND THE ABOVE MENTIONED COMPANIES OR THE AUTHOR IS NOT RESPONSIBLE FOR ANY DAMAGE CAUSED TO YOUR COMPUTER FOR THE USAGE OF THIS FILE.

This mod alters the (frankly terrible) holograms used in the cutscenes prior to boarding the Star Forge at the end of KOTOR to bring them more in to line with the style seen in the movies and TSL. For some unknown reason, Bioware decided to go with a weird texture-based approach that simultaneously looks both horrible and nothing like how Star Wars holograms are typically depicted. Before: After: Changes: Admiral Dodonna hologram model completely replaced with a new one based on her regular appearance. No longer has incorrect mirrored torso UVs. Dodonna model split into sub-meshes for optimal hierarchical occlusion. Vandar model given some mesh tweaks to remove some intersection issues. Models now use mesh-based transparency rather than additive texture blending. Custom keyframes added to animations to facilitate mesh-based alpha approach and added meshes. New animated textures for Vandar and Dodonna created based on their regular appearance textures. Minor alteration to one shot during the DS cutscene to prevent Dodonna leaping out of frame while Vandar is speaking. Known Issues: Because meshes do not self-occlude, there are some artefacts during certain shots. For example, seeing the neck through the chin. Acknowledgements: Thanks to @bead-v for KOTORMax and MDLEdit Thanks to @ndix UR for MDLops

[K1] Temple Main Floor - Missing Lamps Fix Lights are always nice in a dark places. Though it'd be nicer to know where it came from... What Happened? Inside the Temple Main Floor, there are rooms with source of lights that comes from nowhere. I was terrified... thought at first they're missing the GIT reference for the placeables, appears they're not, as they're not placeables. With second thought, perhaps they're missing their render flag? Again, no lamp meshes with the room model as pointed by DarthParametric. Apparently, they are missing their lamps which caused by missing references for the objects. In essence, the lamp is not part of the room model nor a placeable, instead a reference model called by the room's. What Does This Mod Do? This mod adds the missing reference for the lamps to four of the rooms inside the Temple Main Floor module. Optionally, it can also readjust the facing point of two Rune Covered Pillars inside one of the room, which I think could improve the aesthetics and immersion that's missing from the original setup. Here's a before-and-after screenshots of what this mod mainly does - And the optional that readjust the pillars' facing point - What Can You Do? There's always room for improvements; reviews, critiques, comments, suggestions, questions and feedbacks are much appreciated. PM, write them on my feed or leave any on the mod's page as you please. And thank you! for downloading, and using this mod. What You Should Do? For best experience with the game itself, I suggest you to have KOTOR 1 Community Patch installed. Hope you enjoy the mod as much as I do! Installation: run the installer and choose INSTALL option, then hit the [Install Mod ->] button! Uninstallation: remove these files from the Override folder - m44aa_04a.mdl m44aa_04a.mdx m44aa_05a.mdl m44aa_05a.mdx m44aa_15a.mdl m44aa_15a.mdx m44aa_17a.mdl m44aa_17a.mdx Compatibility: will not be compatible with mods that edits and/or replace the relevant models, also mods that possibly changes the module layouts/LYT The mod can be installed anytime - anywhere as the game's progress, and will have direct effect instantly It is play-tested with the latest version of KotOR 1 Restoration/K1R and is compatible with it. At the other hand, it was only by far tested with K1:Community Patch/K1CP v1.7, though assets-wise, there's nothing to be conflicted with the 1.8 version Redistribution: you can redistribute this mod or re-release it on any websites, just don't claim it as your own. Though I'd love to provide direct support to my work, which wouldn't be possible if they're scattered in the Unknown Regions. Be advised then, most likely I will not provide ones if I don't know where it re-hosted. If you are to re-use an assets to a project you will be releasing, you don't have to ask for permission - but your generous intention is very much welcome. Inside this mod are resources which can be repurposed for your likings in one condition; please include the unmodified-original sources along with the release of the project. I'd love to know what others are up too, particularly if my work are included. Said and done, give credits to BioWare & LucasArts with the release - as without them this enjoyment would be non-existent. A bit of appreciation to this peasant here is also a very warm welcome, welcome. Credits: The Almighty Force which gave me chance to finish the mod BioWare & LucasArts for developing one of the best RPG I've ever played DarthParametric for helpful insights, troubleshooting, and information regarding the model name in the first place, also for past-present knowledge which allows me to create mods and all his outstanding creation that I am a fan of JCarter426 and Inyri Forge for all their awesome work that I look up to - I learned a lot from their mods and been practicing a lot using their method ROTNR for Creating Module Files in KotOR tutorial which opened the gate for me to packaging a custom MOD/module Fred Tetra for the amazing KotOR Tool bead-v for MDLedit and KOTORmax stoffe for the magnificent TSL Patcher and ERFEdit Fair Strides for improving TSL Patcher functionality and the very helpful KotOR Toolset tk102 for K-GFF Notepad++team for Notepad++ All the Tool Makers wasn't mentioned - can't make it without y'all! All the inspiring streamers on DeadlyStream All the inspiring modders either active or inactive DeadlyStream for being a home; a place to hangout, to discuss and hosting my work DeadlyStream staffs for tirelessly improving and maintaining the site Snigaroo/Sniggles for hosting #mod_development on /r/kotor -eb

HD texture for Twi'lek female. Files posted after 2023 are used with K1 Thigh-High Boots For Female Twi'lek Body (Modder's Resource) 1.0.

This mod makes some minor changes to the forcefield in the Upper Shadowlands on Kashyyyk that gates access to the Lower Shadowlands. In the vanilla game, the forcefield is never actually disabled. Rather, the sound effect is simply turned off while the camera is pointed away from the forcefield, followed by an immediate area transition. It appears that Bioware did this due to issues with opening and closing doors via scripting. Additionally, there are no apparent controls for the forcefield, simply a frame and the field itself. The level model containing the forcefield has been edited to add a computer panel, fix a gap above the forcefield via some adjustments to the frame geometry, move some vines out of camera shot during dialogue, and prevent grass planes from spawning too close to the ramp and clipping through. The dialogue that occurs when interacting with the field has had some scripts injected to play animations implying that the forcefield is being switched off via the control panel. Jolee will now approach the control panel when the dialogue starts, and will face it when disabling the field. The field itself is now shown shutting down before the party transitions to the Lower Shadowlands. Additionally, there appears to have been an error in leaving out a script on one of the nodes that would stop Jolee from saying "You aren't going to ask about it?" even if you had actually asked about it, which has been fixed. Compatibility: The K1 Community Patch edits the Upper Shadowlands OnEnter script. Those changes are also incorporated into this mod. If you are using a mod that forcibly overwrites MOD files (like NPC Overhaul), make sure you install that mod first. This mod will patch a pre-existing kas_m24aa.mod in the Modules folder. Not compatible with any other mod that replaces the same level model (m24aa_09a). Not compatible with any other mod that puts kas24_force_01.dlg in the Override folder (although such a case should be fixable with a compatibility patch). Known Issues: In order to get the forcefield to close and function properly again after a level transition, it was necessary to resort to a hack function Bioware implemented for (presumably) the same issue they had with doors on the Yavin space station. In testing this has worked perfectly fine, however, the specifics of the hack are undocumented, so there may be edge cases I haven't encountered. If anyone experiences any issues with it, let me know. As you can see in the video, there's a subtitle error for one of Jolee's lines. Fixing it is better left to dedicated dialog.tlk overhaul. The mod doesn't touch the Lower Shadowlands module, so there's no active field or control panel on that side. Perhaps that could be an optional extra added in a future update. Acknowledgements: Thanks to @A Future Pilot for permission to distribute a modified version of K1CP's k_pkas24aa_enter.ncs Thanks to @JCarter426 for various scripting advice and troubleshooting, past and present Thanks to @LiliArch for correctly guessing that it wasn't just Bioware being lazy, which lead me to find Bioware's hack Thanks to @bead-v for MDLEdit and KOTORMax Thanks to @ndix UR for TGA2TPC The control panel textures include a mishmash of various textures from The Old Republic MMO The robes worn in the screenshots/video are from @JCarter426's Fashion Line I: Cloaked Jedi Robes for K1 Thanks to @ebmar for pointing out the lack of TSLPatcher.exe in the initial release

======================================================== A KNIGHTS OF THE OLD REPUBLIC I: MODIFICATION Dodonna’s transmission mod 1.1 ======================================================== Author: danil-ch Contact: danil-ch can be reached via pm at deadlystream. Name: Dodonna’s transmission Filename: [K1]_Dodonna's_Transmission_v1.1.rar Original Release Date: 20/08/19 1. Description: ---------- This mod basically makes PС appear during Dodonna’s transmission (LS version). 2. Install: ---------- To install, extract the Main Patch folder to anywhere you like, as long as it is not the SWKotOR1 folder. Simply run “Transmission.exe”. 3. Uninstall: ---------- To uninstall, replace (or delete) STUNT_42.mod in the game’s Modules folder with the original from the Backup folder created during the installation. Remove m12aa_c05_cam.mdl from the Override folder (Revisited version only). 4. Bugs: ---------- This has been tested several times to make sure nothing weird happens. If you find anything, let me know. 5. Credits: ---------- Fred Tetra - For creating his awesome KOTOR Tool that makes us modders job a lot easier. DarthParametric - For transition to module patching. THIS MODIFICATION IS PROVIDED AS-IS AND IS NOT SUPPORTED BY BIOWARE/OBSIDIAN ENTERTAINMENT OR LUCASARTS OR ANY LICENSERS/SPONSORS OF THE MENTIONED COMPANIES. USE OF THIS FILE IS AT YOUR OWN RISK AND THE ABOVE MENTIONED COMPANIES OR THE AUTHOR IS NOT RESPONSIBLE FOR ANY DAMAGE CAUSED TO YOUR COMPUTER FOR THE USAGE OF THIS FILE.

A KNIGHTS OF THE OLD REPUBLIC MODIFICATION Leviathan Differentiated Dialogue by Revanator (ethan.wookie@gmail.com or contact me at DeadlyStream) Description: The Leviathan was always one of my favorite parts of the original KotOR game. I always liked running around as one of my favorite party members, having a mini-adventure before taking control of my PC again. However, it always bothered me that the dialogue you had with the Rodian prisoner was the same for all possible party members (save T3). This mod fixes that. You will now have different options for all party members that fit with their unique personalities, temperaments, and manners of speaking. I left T3's untouched. Installation: Simply copy the lev40_rodpris2.dlg file into your override folder. Uninstallation: Delete lev40_rodpris2.dlg from your override folder. Compatibility: Should be compatibile with any mod that does not touch lev40_rodpris2.dlg. This IS compatibile with K1R, but K1R is not necessary! Credits: jc2 for some heavy testing and bug-finding (and the screenshot). Fred Tetra for KotOR Tool tk102 for DLGEditor Usage: Please do not upload this anywhere without my permission, and contact me if you use this in any of your mods, so that I may approve you.

This mod replaces the 2D billboard holograms used in the Twisted Rancor Trio puzzle in the Taris Lower City Apartments with full 3D holograms, coloured blue like in the movies (and TSL). Also fixes some missing sound effects that were intended to play when activating each hologram. You may also be interested in my Movie-Style Rakatan Holograms and Movie-Style Holograms for Endgame Cutscenes mods. Changes: Replaces Bith 2D sprite with four separate animated 3D Bith models, each with a different instrument Replaces singer 2D sprite with animated 3D model (two different anims) with semi-custom texture to look like the original Adds emitter VFX Only switch emitter light on when activated instead of always on Repairs broken activation sound effects Known Issues: Because meshes do not self-occlude, there are some artefacts when viewing from certain angles. Requires a save before entering the Taris Lower City Apartments (East) for the first time due to GIT changes. Acknowledgements: Thanks to @bead-v for KOTORMax and MDLEdit Thanks to @ndix UR for TGA2TPC Thanks to @CarthOnasty for the original idea, which I shamelessly stole (I did wait 2 years though)

This mod replaces the model used for the Rakatan hologram to bring it more in-line with the style seen in the movies and TSL. It also now has lipsync, unlike the original model. Additionally, the placeable Rakatan holo statue has been changed, swapping the original 2D billboard for a 3D model, and again bringing the appearance in-line with other holograms. As of v1.1, the hologram in the Elder's compound has now been moved above the computer to an added hologram projector rather than standing in the hallway, and the static camera reoriented to suit. As of v1.2, a hologram has been added to the computer in the Temple Catacombs. Note that changes to this scene probably mean the mod is no longer compatible with K1R. Video of it in action: https://www.youtube.com/watch?v=KWPjUp_8Ax0 To install, run INSTALL.exe. Known Issues: During testing a crash was discovered during the Kashyyyk Star Map sequence. I believe this has been completely resolved, but if you encounter any such issues then you may need to add the "Disable Vertex Buffer Objects=1" line under [Graphics Options] in swkotor.ini The original holo statue uses a billboard VFX which always faces the camera. As such, the directional facing of the placeable is irrelevant. The switch to a 3D model results in a static facing, I set this to match the facing of the placeables used in the South Beach Elder's compound, but if this placeable is used elsewhere it may end up facing the wrong direction. If anyone spots such a case, let me know in the comments. Acknowledgements: Thanks to @bead-v for KOTORMax and MDLEdit, and for figuring out the skin vs trimesh hierarchy alpha crash issue. Thanks to @ndix UR for TGA2TPC. Thanks to @JCarter426 and @jc2 for undertaking some testing to confirm the crash issue. Thanks to @EbonHawkStowaway999 for informing me about the Catacombs walkmesh error.

Bastila's Dark Bodysuit by Revanator, Quanon, and A Future Pilot Contact: Contact Revanator on DeadlyStream or email at ethan.wookie@gmail.com. About: This mod adds a special robe for Bastila to wear when you meet her on Lehon (the Unknown World). It's a black-and-gray variant of her standard attire. Its stats are of a slightly beefed Qel-Droma robes to give her some nice bonuses while remaining very balanced. She will be wearing it when you meet her on top of the temple, and when (if you go Dark Side) she rejoins your party. Quanon did the texture for it in the style of his K1 party member retextures. Highly recommended that you also install his Bastila Shan HQ retexture. Otherwise this will look a bit out of place. Installation: Run Install.exe and choose your options. Uninstallation: Delete P_BastilaBB02.mdl, .mdx, .tga, .txi, and .uti from Override, and sta_m45aa.mod, sta_m45ac.mod, unk_m44ac.mod, STUNT_44.mod, and STUNT_55a.mod from the Modules folder. Also delete p_bastilla.utc from Override if you used the "Gain on Taris" option. If you used the replacement option, just delete p_bastilabb01.tga, and .txi from Override. Compatibilty: Should be compatabile with every mod that does not edit Bastila's utcs. If you install the "replace standard clothes" option, it will override any other mods for Bastila's clothes. Credits: Fred Tetra for KotOR Tool BioWare for this fantastic game Quanon (again) for being super helpful and creating this beautiful texture A Future Pilot for the TSLPatcher Install jc2 for bug testing

Security spikes are disposable items that give the player a temporary boost to their Security skill when activated, helping them pick more difficult locks. At least, that's how it's supposed to be. That's how they work on the Xbox version, and in KOTOR 2, but security spikes don't actually do anything at all on the PC version of KOTOR 1. The cause seems to be some sort of bug in the GUI that prevents security spikes from ever appearing in their intended slot. So when interacting with a door, there isn't an option to scroll from the Security skill to security spikes, as there is in KOTOR 2. The GUI was changed for the port from Xbox to PC, and security spikes probably got left out due to oversight. I couldn't find any way to resolve the issue, though, so I came up with two alternative options. Option A Option A replicates the security spikes' intended function as best as I could manage. They’ve been given an activate item property and appear in the non-medical item slot (along with stimulants and shields). When a character activates a security spike, they receive a temporary boost to their Security skill and proceed to unlock the nearest door or container. Apart from the boost, the skill check for the lock is the same as usual: 1d20 + Security vs. the lock’s DC. Security spikes are single-use and discarded whether the character succeeds in picking the lock or not; however, they are not used up if the attempt was impossible – if there wasn’t anything in range or the lock required a special keycard, for example. Regular security tunnelers grant a +5 bonus and security spike tunnelers grant a +10 bonus. Option B Option B removes security spikes from the game, replacing them with credits. The value is equivalent to the most you could get from selling the original security spike items to a merchant. Mission’s ability to create security spikes on the Ebon Hawk is removed.

Hello again! This is a greatly updated reskin of the Rakghoul creatures. Featuring an updated 2k texture and 1k working bump map. Simply copy the files into your Override.

A little while ago it struck me - The Dantooine Jedi academy has a workbench, but the Korriban Academy didn't, which can be very inconvenient. In fact, there wasn't one on all Korriban. This mod fixes all that! Now there is a workbench in the little room which leads to the Valley of the Dark Lords. It's just on the left as you come in. The only mod conflict that there might be is if someone else's mod modifies Master Uthar's dialogue.

This mod will add upscaled textures for the Tatooine part of the game. Except the skies, see note below. All textures are now 4x their original size. Example a 128x128 becomes 512x512, etc... I've not gone up to the 4096x4096 sizes as I don't see what that would add to this older game. A few textures do get to this size, example is the Ebon Hawk. Normal maps have also been redone, rerendered not just upscaled. It's still a 400% improvement on the older files. Have a peek at the screenshots and; Enjoy! Also try and spot the babies while on Tatooine. EDIT: Added a tiny zip with a missing wall texture! Sky textures are made by the awesome Kexikus get them here: https://deadlystream.com/files/file/723-high-quality-skyboxes-ii/ Qs_Tatooine_miss.7z

Custom Selkath Animation By Alvar007 This is my first mod release, so I hope I'm doing everything all right. ------------------------------------------------------------------------- DESCRIPTION: This mod adds a new entirely custom animation made by me to the TALK_FORCEFUL unused slot of the Selkath model. This will allow the Selkath to play an "angry talk" animation whenever it's called in their dialogues which is a bunch of times. INSTALLATION: Just run the .exe that comes with this download and select the game's installation main folder (NOT override). COMPATIBILITY: This mod should be compatible with any mod that doesn't alter the Selkath model and/or appearance in any way. ------------------------------------------------------------------------- THIS MODIFICATION IS PROVIDED AS-IS AND IS NOT SUPPORTED BY BIOWARE/OBSIDIAN ENTERTAINMENT, LUCASARTS, DISNEY OR ANY LICENSERS/SPONSORS OF THE MENTIONED COMPANIES. USE OF THIS FILE IS AT YOUR OWN RISK AND THE ABOVE MENTIONED COMPANIES OR THE AUTHOR IS NOT RESPONSIBLE FOR ANY DAMAGE CAUSED TO YOUR COMPUTER FOR THE USAGE OF THIS FILE.

A KNIGHTS OF THE OLD REPUBLIC MODIFICATION High Quality Blasters By Sithspecter Description: When Knights of the Old Republic won Game of the Year in 2004, none of the awards were for the blaster models. While the storyline and gameplay are top notch, the default weapons are sadly lacking in quality. Extremely low polygon models combined with 64 px by 64 px textures make them horrendous to look at. On my last playthrough of KotOR, I had enough of the ugly blasters. Who wants to pay thousands of credits for a terrible looking grey-ish blob that's supposed to be a top notch firearm? Nobody, that's who! So I sought out to fix this problem and provide high quality models and textures. This mod completely replaces the existing blasters with newly modeled firearms, complete with high quality textures. Special care was taken to retain the form and look of the original items, but in a high quality package. Each weapon was carefully textured based on close examination of its default counterpart. It's a much improved package that I hope will be a permanent addition to your KotOR override folder for years to come. Use: Use of High Quality Blasters is extremely easy. Put all the files in your Override folder, then play the game. That's it! The new models will automatically appear when you load up your last save. However, this mod does make a couple .uti changes to avoid doubling up on weapon textures. I've applied a new model and texture to a few items that share a model and texture in the default game. The following items are affected: Baragwin Assault Gun Baragwin Disruptor-X Weapon Baragwin Heavy Repeating Blaster Baragwin Ion-X Weapon Carth's Blaster Genoharadan Blaster What this means is that if you already have one of these items, it will still show up as high quality, but it will share a texture with another high quality item. If you re-acquire one of these through cheats or KSE, it will appear properly. If you start a new game, everything will appear properly. This will not negatively affect the gameplay in anyway. A note about the Sith Sniper Rifle: I discovered that the Sith Sniper Rifle is widely used as a blaster wielded by Sith Troopers. It looks somewhat comical used by them (predominantly fired from the hip). So, I have included something of a patch that allows the Sith Troopers to use a regular looking version of it with the new texture. The Sniper version can be found at Kebla Yurt's store in the Upper City North of Taris and in a container in the Sith Academy on Korriban. If you want to cheat more Sith Sniper Rifles that look like a sniper, use the following code: giveitem g_w_blstrrfl006 Installation: 1. Run "High Quality Blasters Installer.exe" in the zip file. 2. Follow the on screen instructions, and point the Installer to your game folder (not Override folder) 3. Profit Version 1.1: If you have installed High Quality Blasters previously, you can install this version over it and it will still be fine. However, if you want to fix the bug of the blaster randomly appearing under the Ebon Hawk on Tatooine, you must remove the following files (make sure of exact filenames): w_ionrfl_004.mdl (NOT w_ionrfl_04.mdl) w_ionrfl_004.mdx (NOT w_ionrfl_04.mdx) INCOMPATIBILITY: IF YOU HAVE TOASTY FRESH'S TOTAL WEAPON OVERHAUL OR FALLEN GUARDIAN'S WEAPON MODEL OVERHAUL TEXTURE REWORK, YOU SHOULD BE ABLE TO INSTALL THIS MOD OVER THOSE MODS WITHOUT AN ISSUE. HOWEVER: DO NOT INSTALL TOASTY FRESH'S TOTAL WEAPON OVERHAUL OR FALLEN GUARDIAN'S WEAPON MODEL OVERHAUL TEXTURE REWORK OVER THIS MOD. IT WILL LIKELY CAUSE THE TEXTURES TO BE WRONG. Bugs: Due to differences between the body models (especially female), the weapons will sometimes appear to clip the hands especially in the female off-hand). There is nothing I can do about this without introducing more issues, it is something that happens with the default weapons, and you will have to live with it. Changelog: Version 1.1: Fixed an issue where a blaster rifle randomly appeared under the Ebon Hawk on Tatooine. Fixed an issue where Bith instruments were replaced by pistols. Fixed the Assassin Droid and War Droid models to accept the high quality repeating blaster texture for their weapons. Credit: Thanks to 90SK, Fair Strides, Varsity Puppet, and Kexikus for providing feedback for this mod. Credit goes to Kexikus for the inspiration from your screenshots. They look fantastic so I modeled the screenshots for this modafter your High Definition Skyboxes mod. Permissions: Do not upload this mod or assets from this mod, modified or not, to other sites without my express permission. I have uploaded this mod to multiple sites and can provide support on those sites. Legal: THIS MODIFICATION IS PROVIDED AS-IS AND IS NOT SUPPORTED BY BIOWARE/OBSIDIAN ENTERTAINMENT, LUCASARTS, DISNEY OR ANY LICENSERS/SPONSORS OF THE MENTIONED COMPANIES. USE OF THIS FILE IS AT YOUR OWN RISK AND THE ABOVE MENTIONED COMPANIES OR THE AUTHOR IS NOT RESPONSIBLE FOR ANY DAMAGE CAUSED TO YOUR COMPUTER FOR THE USAGE OF THIS FILE.

Random HD UI Elements by Sdub Version: 1.0 Description: Firstly, While using the HD UI Mod, I noticed there was quite a few things in it that were not HD and looked quite awful. One being the planet icons, and two being the party selection screenshot of the character on the right side. I decided to try and at least do something about this. For the party selection screen I took screencaps from the the game itself with high resolution textures made by ShiningRedHD's mod on the nexus https://www.nexusmods.com/kotor/mods/1282 Then proceeded to upscale them, this is the result. All characters images are from the waist up as best I could, HK47 was especially tricky. I did not do T3M4 as @Dark Hope created one for his HD Astromech Mod that is vastly superior to mine. I made one creative decision with: I also attempted to do Trask, it looks awful. But He's there, for some reason his texture does not apply correctly on the stats screen. It is like this even in the default image. Secondly, I had an idea to make new planet icons, upscaling was not successful, and creating my own looked absolutely awful. So after speaking with @Effix and showing him my trial and errors, it inspired him to create some that he told me to put in this pack with his blessing. Installation: Locate the folder of which you want to install and then place files in override folder. Uninstallation: Delete files that you placed in your override Compatibility: As long as you are you are using @ndix UR 's High resolution menus I do not see you having any problems. I do not know how it would look without it to be honest. I made these with 16:9 in mind. I do not know how they will do in other resolutions. Feel free to let me know. K1R Compatible: Yes Tools Used: MS Paint GIMP Waifu2x Big thanks to the KOTOR Modding Discord

Yet another HD retexture. May just do the rest as one big release! As usual, drop in override

Like most of you, I loved @Dark Hope's reskin for Jedi Master Vrook, 'HD Vrook'. However, I thought that the mod's changes to his skin tone -- from warm and healthy to pale and decidedly old -- fit far better for his appearance in KOTOR 2. With her permission, I took Dark Hope's HD Vrook as a base and added a bit of warmth to Vrook's skin tone, to suit his appearance in KOTOR 1. You can see this mod's texture in the image below, or compare it with other mod's textures in the screenshots above. 1 - HD Vrook Recolored (this mod) 2 - HD Vrook (Dark Hope's original) 3 - upscaled vanilla Vrook (textures from Ultimate Character Overhaul) Thanks to @Effix for helping me fix a texture error in my robes for the screenshot.

JC2 Improved Grenades The idea has been around for a while, but I haven't seen a mod, other than FairStrides [TSL] Fumble Grenade mod, attempt to edit the effects of grenades. So by editing the k_sup_grenade.nss, I've reworked the grenades to increase their potency. Beware! This works both ways! Demolitions now affects how much damage a grenade can do, the more demolitions a character has the more damage they can cause with a grenade. This was originally GGT89 idea from this thread > http://deadlystream.com/forum/topic/5678-need-help-to-modify-game-mechanics-in-kotor2/?hl=grenade#entry59186 The first option is for vanilla lovers, that only adds demolitions skill as a damage bonus and increases the explosion radius slightly. Like before, a detailed log of the changes exist inside the folder! Second option for hardcore enthusiasts, the grenades instantly kill groups of people and are quite lethal! I recommend only installing this with JediShemL's Super Enhancement Mod or other realistic lightsaber/blaster mods. INSTALLATION: Copy and paste the k_sup_grenade.ncs file into the override. You will have to decide which one you want. There are two folders, each with a different version. It will take effect immediately, and can be removed, at any time, without causing any issues. Credits: Special Thanks to Bead-v for the advice on another thread about editing the k_sup_grenade script. Thanks to FS for teaching me most of the script I know! As always, this mod may update pending feedback. Hope you enjoy! -jc2

///// 01. Background ///// Being such a main part of the K1 story, I was surprised to see these had yet to be revamped. I was looking to get into modding/reskinning, so I thought this would be a great project. ///// 02. Enhancements ///// First steps were to update the overall model. I wanted some visual upgrades while still maintaining a very-aged and neglected structure. I love the runes scattered throughout the game and I really wanted to incorporate those as well. It seemed fitting to light them. (And you're going to them all over the place.) Next section was so focus on the HUD (for lack of a better term). It was very pixelated and really needed a crisp, new look. I tried to simplify it a bit and ended up removing a couple of parts as well. The biggest change I made was creating a new piece for the planet locators. I simply didn't like the originals and wanted to make the location an actual planet. This was a really fun part--recreating the central galaxy this all revolved around. I used some shots of actual galaxies, nebulas, and starfields. It's hard to beat the real thing. I adjusted the colors slightly for better clarity as well. The mother of a bastard that caused me the most grief, was the dodecahedron in the center of the star map. The texture had such a bizarre repeat pattern and never really wrapped that well. I'm happy to the point I got it to, but would like to make that an actual sphere in v2. ///// 03. Future Plans ///// In thinking about a version 2, I'd like to actually edit the model files. I think some edges could be softened, but mostly I'd like to adjust the mapping to avoid so many repeated areas of the texture. The final opening of the star map, where the PC finds out the location of the forge could use some work. Most (if not all) is model work and I wasn't ready for that. I'd also like to adjust the lighting in a couple of places. Would I go as far as to customize it for every zone you find a map? I dunno, that's a big endeavor and there are a limited number of placeables. ///// 04. Moving Forward ///// This has been a fun project for sure, and I'm happy to see it come to fruition. Please download and let me know your thoughts. I open to constructive criticism and whatever I can do to the better the project, I'm happy to do so. ///// 05. Install ///// Drag 'em to your override folder. These shouldn't conflict with anything. ///// 06. Uninstall ///// Remove the files. ///// 07. Disclaimer ///// Distribute, have fun, edit, whatever. I only ask that you don't claim this as your own. ///// 08. Thanks ///// So many! Shout outs for tutorials, advice, suggestions, testing, encouragement, and more. A Future Pilot, Darth_Sapiens, DarthParametric, DarthVarkor, djh269, InSidious, JCarter426, Kexikus, ndix UR, Rece, Sith Holocron, Sithspecter, Sniggles, tjsase, VarsityPuppet, Zhaboka

Description This mod adds a climactic Knock Down effect to a lightsaber throw (DC 5 + character level + WIS/CHA modifier against reflex save). Only Adv. Lightsaber Throw can knockdown its primary target; Normal lightsaber throw will NOT have this effect. (Which makes sense, “Advanced” implies more fancy effects) Installation Make sure override folder exists at game root directory Run TSLPatcher to install (Not recommended: if you really want to install manually, I’m sure you could figure out the procedure by looking at tslpatchdata/changes.ini file) Compatibility This mod shouldn’t cause any conflict. (It adds completely new function and modifies an existing line of spells.2da that no normal mod would touch.) Permissions Do not claim credit for this mod and do not use assets from this mod without my permission Special Thanks Fred Tetra for Kotor Tool Stoffe for TSLPatcher Legal THIS MODIFICATION IS NOT SUPPORTED BY BIOWARE/OBSIDIAN ENTERTAINMENT, LUCASARTS, DISNEY OR ANY LICENSERS/SPONSORS OF THE MENTIONED COMPANIES. USE OF THIS FILE IS AT YOUR OWN RISK AND THE ABOVE MENTIONED COMPANIES OR THE AUTHOR IS NOT RESPONSIBLE FOR ANY DAMAGE CAUSED TO YOUR COMPUTER FOR THE USAGE OF THIS FILE.

A KNIGHTS OF THE OLD REPUBLIC MODIFICATION Loadscreens in Color By Sithspecter Description: Knights of the Old Republic is a fantastic game. There isn't a whole lot that can be improved on. However, one area of the game that could, quite literally, use some more color is the loading screens. This mod replaces all the default black and white loading screens with loading screens that are in color. Each of the loading screens has been reproduced shot for shot, with a few exceptions where the angle was not possible or didn't showcase the area very well. Extra care was taken to produce a look very similar to the original, but in color. The result, in my opinion, really freshens the game and invokes the feel of the area being traveled to. Installation: Installation of Loadscreens in Color is extremely easy. Drop all the files in the "Override" folder in this archive into your Knights of the Old Republic Override folder. The new loading screens will automatically appear, you will not have to start a new game! INCOMPATIBILITY: IF YOU HAVE ANOTHER MOD THAT ALTERS THE LOADING SCREENS, YOU WILL HAVE TO CHOOSE ONE OR THE OTHER. INSTALLING THESE FILES WILL OVERWRITE OTHER LOADING SCREEN MODS. Bugs: None known. Credits: Credit goes to Kexikus for High Quality Skyboxes, which were installed when I took the screenshots. Credit goes to Darth InSidious for his Sonic Screwdriver, which was handy to open doors that wouldn't have been easily opened otherwise. Permissions: Do not upload this mod or assets from this mod, modified or not, to other sites without my express permission. I have uploaded this mod to multiple sites and can provide support on those sites. Legal: THIS MODIFICATION IS PROVIDED AS-IS AND IS NOT SUPPORTED BY BIOWARE/OBSIDIAN ENTERTAINMENT, LUCASARTS, DISNEY OR ANY LICENSERS/SPONSORS OF THE MENTIONED COMPANIES. USE OF THIS FILE IS AT YOUR OWN RISK AND THE ABOVE MENTIONED COMPANIES OR THE AUTHOR IS NOT RESPONSIBLE FOR ANY DAMAGE CAUSED TO YOUR COMPUTER FOR THE USAGE OF THIS FILE.

This fix was originally made by Redrob41 and was located in one of his large mods. I was given permission by the admins to release it to the public. All credits goes to Redrob41, Please contact me if you would like this mod removed. This elongates the handle on the blade so your hands no longer grab the blade directly like it used to. To install just place the contents in the zip to you override! To uninstall just remove the files you place Thanks for the download! Enjoy -Sdub Full credits go to @redrob41

This file is a hex-editable KOTOR executable for use in widescreen patching. The file was originally produced by FairLight, and therefore DeadlyStream offers no technical support for the file or its use.

HD PC Portraits for Knights of the Old Republic v1.0 - 20190909 by ndix UR (DeadlyStream user) This modification adds high resolution (1K) portrait images for player characters (PCs). All 30 male and female vanilla player characters are provided, with all 5 light-dark variants, for a total of 150 new portraits. The 1K portraits have 256x the resolution of the 64x64 originals. The portraits are rendered to match the poses, colors, facial expressions, and lighting of the original images as closely as possible given the following constraints: Only vanilla textures (and my own additional maps based on same) are used A couple face textures had the eye in the wrong place and had to be fixed I reduced the number of background gradients to a set of 4 standards. The originals are all over the place in terms of the gradients and I didn't have time to replicate every one. An effort was made to match each individual set of portraits to its appropriate set of background gradients. While the textures are mostly crap, most of the work was in material setup using a modern rendering engine, so even the vanilla textures still wind up looking much better than they have any right to. This is because of real lights, shading, and materials, of which the original diffuse textures are only a part. I didn't really redo geometry, beyond appropriate use of subdivision surface modifiers. See the included images in preview/ for an idea of how the portraits look. INSTALL / UNINSTALL To install, copy the files from the package Override/ folder to the Override/ folder for your KOTOR game installation. To uninstall, remove the TPC files for this package from your KOTOR game Override/ folder. LEGAL THIS MODIFICATION IS NOT MADE, DISTRIBUTED, OR SUPPORTED BY OBSIDIAN, OR LUCASARTS ENTERTAINMENT COMPANY LLC. ELEMENTS TM LUCASARTS ENTERTAINMENT COMPANY LLC AND/OR ITS LICENSORS. The content of this mod is free for use and reuse, with no implied warranty, you can redistribute it, in original or modified form. If you do, a credit of some kind is nice but not required.

====================================== Knights of the Old Republic Juhani MOD ====================================== author: miro42 email: ben@floydiantheory.com website: www.floydiantheory.com/miro42.deviantart.com name: Cathar Juhani credits (thanks): Trex for his awesome tutorial and everyone at Holowan Labs. Because there are too many to name, thanks for all the great tools out there! For an actual list of programs and tools that I used, check out the little tutorial. Of course, thanks go to Bioware and LucasArts for bringing KOTOR to life. filename: juhaniCathar_head.zip file size: 183KB (435kb unzipped) date released: 18 Feb 2009 description: For those of you who remember Star Wars pre-prequel, you might remember the old Dark Horse comics series 'Tales of the Jedi'. From this series one of my favorite characters was Sylvar, the Cathar. So when I found out that KOTOR had a Cathar I was psyched. Of course then I actually saw Juhani and I was quite dissapointed to find that she looked nothing like a Cathar should. She didn't even have any hair! This mod gives Juhani an actual cat like appearance (based more off of the 'Redemption' arc than the older ones) with a different nose, bigger ears, and a squatter, but (in my opinion) cuter face. I've also retextured her head so it looks a little bit nicer. installation: Extract contents of the zip file. Place the .mdl, .mdx, and .tga files into override (x:Program Files\LucasArts\SWKOTOR by default). Start KOTOR! How easy is that?! uninstallation (is that a word?): delete the .mdl, .mdx, and .tga files from the override. notes: This is my first ever mod and I would like to think that there are no problems with it. However, computers are computers and I'm sure someone will have a problem. If this is the case please email me and I'll look into figuring out the problem. However, since this is my first mod I don't really know what else I can do as my skills are all but nill. So, try redownloading and reinstalling and see if that works. Good luck, and have fun! permissions: If you wish to use this for anything but personal use, send me an email and I'm sure I'll give you permission to use it however you like. THIS MODIFICATION IS PROVIDED AS-IS AND IS NOT SUPPORTED BY BIOWARE/OBSIDIAN ENTERTAINMENT OR LUCASARTS OR ANY LICENSERS/SPONSORS OF THE MENTIONED COMPANIES. USE OF THIS FILE IS AT YOUR OWN RISK AND THE ABOVE MENTIONED COMPANIES OR THE AUTHOR IS NOT RESPONSIBLE FOR ANY DAMAGE CAUSED TO YOUR COMPUTER FOR THE USAGE OF THIS FILE.

This mod replaces all HK-47s textures. Just like my other party member reskins; the size has been increased to 2048x2048. Which allowed me to put in some extra details and give a decent update to the skin. There's now a more visible metal texture but otherwise; nothing major has been altered to HKs skin. I did tweak the contrast and colors but its still the same rusty killer droid. Look at the comparison picture to get a better idea INSTALL: Unpack and copy the 3 files P_HK47_01.tga and TXI, plus PO_Phk47 to your override. That simple!

Quanons Gammoreans Reskin Pack: This little mod will update all the Gammorean skins. All of them had their size increased to 1024x1024. I've been able to put in some extra details, on the faces; better looking eyes. Leather look to their armors. Tweaked the contrast/ brightness; etc... A good overall polish to make them their best, even though they are pigs Installing: Copy and paste all 5 files from my pack. That's it!

HD NPC Portraits for Knights of the Old Republic v2.0 - 20200119 by ndix UR (DeadlyStream user) This modification adds high resolution rendered portrait images for NPCs. The 1K portraits have 256x the resolution of the 64x64 originals. The portraits are rendered to match the poses, expressions, colors, and lighting of the vanilla portraits as closely as possible given the following constraints: Only vanilla textures (and my own additional maps based on same) are used While the textures are quite low-res, most of the work was in material setup using a modern rendering engine, so even the vanilla textures still wind up looking much better than they have any right to. This is because of real lights, shading, and material properties, of which the original diffuse textures are only a part. I didn't really redo geometry, beyond appropriate use of edge split and subdivision surface modifiers. It also includes 1K versions of the darkened placeholder portraits before you meet characters in-game. BONUS There's a portrait for Trask Ulgo, because why not. Also I've included additional alternative non-vanilla expressions for Mission & Jolee because I don't care for their vanilla expressions. INSTALL / UNINSTALL To install, copy the TPC files from the package Override/ folder to the Override/ folder for your KOTOR game installation. To uninstall, remove the TPC files for this package from your KOTOR game Override/ folder. LEGAL THIS MODIFICATION IS NOT MADE, DISTRIBUTED, OR SUPPORTED BY OBSIDIAN, OR LUCASARTS ENTERTAINMENT COMPANY LLC. ELEMENTS TM LUCASARTS ENTERTAINMENT COMPANY LLC AND/OR ITS LICENSORS. The content of this mod is free for use and reuse, with no expressed or implied warranty; you can redistribute it, in original or modified form. If you do, a credit of some kind is nice but not required.

Hi-Res Beam Effects for K1 ========================== by Darth InSidious ================== Description ----------- This mod replaces the Force Drain, cold ray, ion, and neural pacifier beam effects with higher resolution versions. The mod does not replace the Death Field or Force Lightning effects effects. Installation ------------ Just drop the files fx_beam01, fx_beam02, fx_beam03, and Fx_Drain.tga in this archive into your Override folder. Uninstallation -------------- Take the files out again. Legal Disclaimer ---------------- All materials and copyrights belong to LucasArts, Bioware and Obsidian Entertainment Inc., Kotor Tool belongs to Fred Tetra, NWNSSCOMP belongs to Edward T. Smith. I own none of the materials, and I'm not making any money out of this mod. It is to be distributed as-is without alteration, unless by permission of the mod author. This mod is not to be distributed for profit, either. Use it how you like, but if you're going to post it up somewhere, or make a derivate mod, or use it in another mod, you must ask me first. Thanks to: ---------- Quanon and Zhaboka for the feedback on the original TSL hi-res beam effects; Fred Tetra for the truly awesome KotOR tool and his nwnsscomp conversion; Holowan in general for being helpful, friendly and all the rest of the good stuff it is ; KotORFiles, for being simply the best website in the history of the internet...Propaganda? What's that? ; Lucasarts and Bioware for KotOR, and Obsidian, too, for TSL, without which, I couldn't have made this .

It is a truth universally yadda yadda: the lady Scoundrel's starting gear looks uncomfortable. Put bluntly, F!Scoundrel has a stupendous wedgie. Her butt crack is alarmingly defined through her leggings AND underwear--which should not be happening unless those leggings are, like, industrial-vacuum-sealed. Which would be painful. And impractical. And also painful. Overall, not conducive to running around an exploding starship while fighting Sith troopers. So I fixed it. I gave the female Scoundrel basic clothing a bit of a tune-up, making the butt crack less egregious and tweaking the texture to match. May these new and improved trousers bear your Scoundrels to a comfortable and aesthetically pleasing victory! Effusive burbling gratitude to forgetcanon, for extracting those pesky .mdl and .mdx files and for being a source of endless support and patience during my first foray into modding.

This mod will replace and update Canderous texture files. It keeps the same look, but adds in more details.