Leaderboard

Created by: Sith Holocron (and others listed in the credits section) Game: Knights of the Old Republic 1 Version 1.0 Uploaded: 20 MAY 2024 The Brotherhood of Shadows: Solomon’s Revenge Textural Reinterpretation mod was designed to upscale and/or enhance the textures seen in the mod. It is an extensive mod pack (as might be indicated by the size) but as seen listed below, it is not a complete overhaul. Just a note: I have included upscales of the loading screen. However, if someone wants to take at recreating the loading screen in color, I thoroughly support that effort. I say “load screen” rather than “load screens” as the same loading screen is used for all of the BOS:SR areas. On N_DarthRevan01 (TGA and TXI): The mod doesn’t appear to add anything notable to this skin and the game already has this one available. Though I upscaled the texture, you may safely discard it if you covet another texture instead. If folks do want to change the texture of the traditional Darth Revan, there are so many fine reskins available. In addition, I suggest researching the Flowing Robes mod when researching alternate textures. What’s not included and why: All textures with the header m80, m81, or m82. As upscaling these textures will not improve their quality, I have not done so. You should leave these textures in the Override as-is. fx_Smoke02.tga: Upscaling this texture will not improve the quality. Leave this texture in the Override as-is. Skybox textures (trs_Bsky01.tga, trs_bsky01.txi, trs_sky0001, trs_sky0002, trs_sky0003, trs_sky0004, trs_sky0005, wst_sky0001, wst_sky0002, wst_sky0003, wst_sky0004, wst_sky0005, zzz_sky0001, zzz_sky0002, zzz_sky0003, zzz_sky0004, zzz_sky0005): I highly recommend using Kexikus’ mod instead of using the skyboxes included with the Brotherhood of Shadow: Solomon’s Revenge mod. (https://deadlystream.com/files/file/723-high-quality-skyboxes-ii/) However, if you insist on using the original skyboxes, you’ll be able to find them in the folder named “Original BOS Skyboxes.” From what I have seen in game, both the original skybox textures and my upscaled versions of them are NOT compatible with Kexikus’ skybox mod for BOSSR. If you encounter issues, you have been forewarned. Shadow’s textures I have not made upscales for the character and clothing textures for “Shadow”. I highly recommend using Dark Hope’s mod instead. All added portrait textures: I have not made upscales for any of the added portrait textures for the portraits added with BOS:SR. I highly recommend using ndix UR’s portrait mod instead. Installation: The “twilek_m02d.tga” texture has been both upscaled and converted to be compatible with Ashton Scorpius’ mod “K1 Better Male Twilek Heads” and requires its use to work properly. Make sure that mod is downloaded and installed according to its installation directions before installing mine. That mod can be found here: https://deadlystream.com/files/file/1430-k1-better-male-twilek-heads/ After reading the caveats implied in the “What’s not included and Why” section, then add all of the textures you’ll be using into your Override folder. Allow my textures to override the files there. There are 3 TPC files in my mod: aaa_bla01.tpc, fff_lobla01.tpc, and ooo_lobla01.tpc. Make sure to delete the TGA and TXI files of the same name in the Override folder. I won’t be providing an uninstall guide as the shear number of files that’ll be replaced defies an easy way to explain it. Thanks / Credits: I have used a few of the textures from Dark Hope’s “international Global Mod” who has kindly provided blanket permission for their use. Thanks to Dark Hope for allowing me to do so here. n_sithcomf01, n_sithcomf02, and n_sithcomf03 in the Optional textures folder is derived from textures from Thor110’s ”Topaz GigaPixel AI Upscales - K1 1.0.0.” Thanks to Thor110 for providing his upscales to the community as a Modder’s Resource. https://deadlystream.com/files/file/2160-topaz-gigapixel-ai-upscales-k1/ The “twilek_m02d.tga” texture has been both upscaled and converted to be compatible with Ashton Scorpius’ mod “K1 Better Male Twilek Heads” and requires its use to work properly. That mod can be found here: https://deadlystream.com/files/file/1430-k1-better-male-twilek-heads/ Thanks to Ashton Scorpius for his permission to use his Twi’lek male head template to fix this texture. Any issues with this mod – other than the previously stated skybox issue with Kexikus’ BOSSR skybox mod – can be left here on the download page. Please tag me when reporting those errors as that will speed up the timeliness of my reply. Thank you. Enjoy the mod. (This section reserved for when I get around to making an overview video for this mod.) I hereby state that I specifically do NOT wish this mod to be uploaded to Steam Workshop - with the exception of Hassat Hunter who has my permission to do so. I may release this on NexusMods at a later date but I don't wish others to do so. Usage in other mods must be requested AND approved by me before your use.

Another request by @Snigaroo that I thought was worth taking on because it is something that has always bothered me too. This mod removes the appearance of mines on Malachor by adding a new trap type to the game that uses a new model that doesn't contain a mine. Compatibility This mod should be compatible with any and all other mods, unless they happen to change the mines on these levels ( 901MAL & 902MAL ) or replace k_trp_generic.ncs Installation : HoloPatcher Use HoloPatcher to install the mod. Uninstallation : HoloPatcher HoloPatcher also generates an uninstall script after installation, use this to uninstall, you can also access that feature under Tools -> Uninstall in HoloPatcher itself. Thor110 Please do not redistribute or release anywhere without my express permission. Tools used that helped make this possible. Kotor Tool - http://www.starwarsknights.com/tools.php @ Fred Tetra KotOR Scripting Tool - https://deadlystream.com/files/file/191-kotor-scripting-tool/ @Blue HxD - https://mh-nexus.de/en/hxd/ @Maël Hörz HoloPatcher - https://github.com/NickHugi/PyKotor/tree/master/Tools/HoloPatcher @Wizard & @Cortisol

Thematic The One Premise The One: warlord; conqueror; latent Force-Sensitive. A charismatic leader of the Rakata and a near-supernatural anomaly among their people. As an added bonus, he also dies in about two combat rounds! In fairness, with a good character build there’s very little that doesn’t go down in two rounds or less in the lategame. But The One in particular irks me—he’s presented as special, a natural leader in Revan’s own mold, a warrior-prince leading both armies and the political structure of his people. Yet despite having all the resources of the hundreds of islands he has conquered and dozens of crashed vessels he has looted, indeed despite having a Sith Tremor Sword in a bin literally RIGHT BEHIND HIM, he uses two regular vibroblades; despite being so charismatic he convinced his own former chieftain to willingly sacrifice himself and allow his tribe to cannibalize him while being so brick-headed he’s sat on a single island for half a decade, his WIS is 18 while his CHA is only 12; and despite being latently Force-Sensitive, his Will saves are abysmal. This was a ripe field for a Thematic project. Like my similar mod for KOTOR 2, Thematic The One’s goal is not to make the fight against The One actually challenging—this is not a difficulty mod. The fight will be slightly harder than in vanilla, yes, but for some builds this change will not even be noticeable; indeed, I took him out in two combat rounds just like normal. Instead, the goal is to present The One as the game insists he is: a charismatic warrior with vast resources and the—albeit unconscious—power of the Force behind him. Changes The One’s WIS and CHA stats have been nearly inverted, from 18/12 to 14/18; he has been given a Sith Tremor Sword in his main hand and an Echani Vibroblade in his off-hand (neither droppable); his Will saves have been bumped up to 15, to make him about as difficult as an average Dark Jedi to land Force abilities against; his alignment has been moved from Neutral to moderately DS, so that the Solari crystal will work against him; and, most significantly, he has been scripted to use Force Valor at the start of the fight with him. I felt this was important to represent exactly how close The One is to true Force Sensitivity, and how it’s clear that the Force has been supporting his meteoric rise from the start. Compatibility As is the objective with all Thematic-series mods, this mod should be compatible with every other mod out there. Even mods that edit The One should be compatible, as long as they edit his data in the module rather than with a direct .utc file drop to the override; at worst, such a mod would only replace some of my changes with its own. Permissions & Thanks As with any mod “I” have made or will make in the future, this mod has completely open permissions: modify it, redistribute it, reupload it, do whatever. So long as you give me credit for the idea and for the balance settings if you choose to retain most of mine, go for it. You don’t even need to ask me. Particular thanks to JCarter426, who made this entire mod at my request but then told me it would be funnier if I uploaded it like it was my own. Ok.

Just fixed these models for my project and decided that I would post them as well for anyone that might care about the small holes in the level geometry at the far end of the Enclave catacombs or Coruscant temple. 610DAN & 952COR Installation Add the files in the 7zip archive to your override folder. Note : If you are not using the Coruscant mod, don't copy the following files. 952cor_19.mdl 952cor_19.mdx 952cor_19.wok 952cor_32.mdl 952cor_32.mdx 952cor_32.wok Uninstallation Delete the following files from your override folder. 610dan_19.mdl 610dan_19.mdx 610dan_19.wok 610dan_19_lm2.tga 610dan_32.mdl 610dan_32.mdx 610dan_32.wok 610dan_32_lm4.tga 952cor_19.mdl 952cor_19.mdx 952cor_19.wok 952cor_32.mdl 952cor_32.mdx 952cor_32.wok Fixing this took longer than it should have! Thor110

When HK-47 uses the power blast feat with 2 blaster pistols equipped only 1 shot is being fired, this mod fixes this issue, now 2 shots are being fired.

Based on this request thread, this mod replaces the Jedi captive placeables used in the final confrontation with Darth Malak aboard the Star Forge. In the vanilla version of the game, these are all identical copies of the same male body using the PMHC04 (“Mullet Man”) head. New male and female versions of this placeable have been made, utilising a variety of heads from all three human races, and Twi’leks. All eight captives in the level are now unique and distinct from one another. Additionally, the flavour pop-up text for when you interact with the captives has been altered to change the male pronouns into neutral ones, so they work regardless of the subject’s gender. For those that wish it, an optional extra is included that adds these new Jedi as background NPCs to the Jedi Enclave on Dantooine (N.B. as of v1.1, the pictured sparring circle has been removed due to the placeables.2da row limit bug described below). Known Issues: WARNING: A critical issue has been discovered with K1's placeables.2da, limiting the number of additional new entires that can be added to around 20 rows. This mod adds 8 rows. If you use multiple mods that add new rows to placeables.2da, you will likely encounter issues. DO NOT REINSTALL THIS MOD OVER A PREVIOUS VERSION! You will create the placeable overflow issue. In order for the Dantooine portion of the optional extra to take effect, you must use a save prior to leaving Taris. The courtyard portion will only take effect for saves prior to being allowed to exit the Academy. These additions are purely cosmetic, so their absence will have no material affect on the primary purpose of the mod. The core content of the mod will only work with a save prior to entering the final room on the Star Forge, but I assume (hope) most people aren't still installing mods that late in proceedings. Compatibility: The mod is compatible with K1CP. Make sure you install K1CP first. The core content of the mod should be compatible with most other mods, as the changes are restricted to the second-last module in the game (STA_M45AD). The optional content makes changes to the Dantooine Enclave's landing pad (DANM13) and courtyard (DANM14AA) modules. If you are using any mod that overwrites those modules (like Kainzorus Prime's NPC Overhaul Mod), make sure you install that mod first. This mod will patch its changes into pre-existing module files, so should be installed last. Changes in 1.2.1 should mean the Twi'lek master in the optional Dantooine content is now impervious to further hostile robe takeover attempts. If you use @JCarter426's "Fashion Line I - Cloaked Jedi Robes for K1" mod, you can download the supplied compatibility patch to have him wear the TSL robes. If you use @JCarter426's "Fashion Line I - Cloaked Hybrid Robes for K1" mod, you can download the supplied compatibility patch to have him wear the hybrid robes. Acknowledgements: Thanks to @Kexikus for providing code for the NPC OnHeartbeat scripts. Thanks to @jc2 for the suggestion on how to fix the sparring circle combatant health bars. Thanks to @JCarter426 for suggesting the NotReorienting creature flag and for the TSL ported robe assets. Thanks to @bead-v for KOTORMax and MDLEdit. Thanks to @ndix UR for MDLOps v1.0+ and TGA2TPC. Thanks to @StellarExile for pointing out the issue with VFX targeting the base of the model. I must be blind... Thanks to @todevuch for testing the hybrid robes compatibility patch. Thanks to @olegkuz1997 for pointing out that the placeables didn't use TLK StrRefs for their labels. Thanks to @Alice Reyneke for pointing out that pathfinding for the placeables was broken by a previous update.

This mod will replace and update DrdProt texture files. To Install 1. Download: DrdProtHD 2. Copy all files to the Knights of the Old republic's Override folder. (Example location - C:\Program Files (x86)\Steam\steamapps\common\swkotor\Override) 3. When/if prompted to overwrite files, press okay. 4. If you like the mod; leave a comment or endorse! (It would be much appreciated) Made with love.

This removes the visual “cloud” around your character and the musical sting that occur whenever you gain dark/light side points. This patches visualeffects.2da to remove the visual effect and guisounds.2da to point to a new silent audio file. I wasn't sure if just leaving the reference to an audio file empty was a good idea, so I went with an empty sound file. This should preserve any other instances of the light/dark side music stings playing, since it removes just the GUI sound associated with point gain. Why Because having this play as a cloud of red death manifests around you just because you told some overconfident thug that their skull is overdue for a date with the pavement is ridiculous. Likewise, having this play accompanied by blue air freshener mist because you chose the only dialogue option that makes you sound even remotely like a human being devalues what "light side" is. This doesn't fix the core issue of light/dark side points being handed out in dollops for the slightest actions, but at least this makes the game guilt-trip and gaslight you slightly less. Installation Unzip, read the ReadMe.txt, open Install.exe, follow the instructions. Uninstallation Instructions are in the ReadMe.txt Compatibility Should be compatible with everything, including other mods that change visualeffects.2da and guisounds.2da. Known Issues None. However, as I have not yet finished the game, if VFX_IMP_DARKSIDE and VFX_IMP_LIGHTSIDE are referenced as an effect anywhere outside of creating the cloud around the player character, those instances will be made invisible as well. Tools used Holocron Toolset TSLPatcher

It's finally here! At last, The Sith Lords Restored Content Modification 1.8.6 has been successfully ported to the original Xbox. The game is now able to be fully completed from beginning to end with zero major issues. This upload is in the form of patched files that must be added on top of an existing installation of the mod. Requirements -An original Xbox capable of launching homebrew (soft or hardmodded) -Some method to transfer files between your Xbox and PC (FTP is recommended) -At least 5GB of space on your Xbox's HDD -A physical copy of Knights of the Old Republic II for the Xbox Installation 1. IMPORTANT! If you have previously dumped the first Knights of the Old Republic game to your Xbox, ensure that you change the folder it's located in from its default ("StarWars") to any other name. If you do not do this, both games will end up dumped into the same folder, ruining both installations 2. Use UnleashX to dump your game disc to your Xbox's HDD. Other methods of dumping the game may be possible, but I can only promise it works using UnelashX 3. FTP the entire game folder to your PC, and create an additional backup of it on your PC in the event you need to restart the installation 4. Run the official TSLRCM 1.8.6 installer .exe, which you can find here: https://deadlystream.com/files/file/578-tsl-restored-content-mod/ 5. Specify the Xbox dump of the game as the folder to which the mod should be installed. (i.e. D:\Games\SWKotOR2\). When in doubt, it's the folder with "default.xbe" located inside it. 6. Delete the following files from the newly created Override folder: 235TEL.lyt, 235TEL.vis, 235TELA.mdl, 235TELA.mdx, and 235TELA.wok, 7. Delete every .tga file from Override 8. Delete 601DAN.mod from Modules 9. Extract the contents of the Install Package into the root game folder, overwriting any files if asked 10. Delete the original, unmodified rip of KotOR II on your Xbox's HDD 11. FTP the modified KotOR II back to your console in a location of your choosing Known Issues High Priority: -The Battle of Khoonda is currently not implemented. The restored version of this sequence spawns so many NPCs that it causes the Xbox to choke to death on its own assets within seconds of the battle starting, so it has been reverted to its vanilla version. If you would like to see this happen (not recommended), simply don't delete 601DAN.mod from the Modules folder. -Lightsaber training with Visas is currently bugged and does not end. Low Priority -On very rare occasions, a significant performance drop may occur during combat that passes after a few seconds. This may or may not be an issue with the Xbox version and may or may not be related to Jedi Guardian characters not currently controlled by the player initiating a Force Jump, but it's so uncommon that diagnosing it is difficult. If you would like to contribute to fixing the last few remaining issues, feel free to DM me and I will be happy to implement your fixes in a future update. Special Thanks Though this is my release of the port, and I have been the one to do all of the labour in putting it together, this would not have been possible without assistance from various members of the KotOR community including, but not limited to: -@Alvar007, for advising on various fixes, both major and minor, and contributing to the s_male02.mdl/.mdx fix -Jacqyl Frost, for offering to playtest the mod -JCarter426, for technical support, bugfixes, and creating SithCodec -Thor110, for technical support -armado548, for pioneering much of the early steps of the process and leaving enough of a paper trail for me to pickup on -bead-v, creator of MDLEdit -Fair Strides, creator of ERFEdit and DLG Editor -Darth_Sapiens, creator of KOTOR TOOL -Blue, for creating KotOR Scripting Tool -Monochrome Jones, for creating the "LOTO's Xbox Version" text in the logo -The original TSLRCM team, for creating the mod in the first place -Sith Holocron, for creating and implementing the in-game logos for the mod -Jacd28, for contributing to the s_male02.mdl/.mdx fix If you don't see your name here and feel as though you contributed to the project, I apologize! Please DM me and I will add your name here without delay.

A Mod for Star Wars Knights of The Old Republic Author: N-DReW25 1.3.0 Release Date: 06.04.2022 Installation: This mod requires the K1 Community Patch to work, install this mod first: https://deadlystream.com/files/file/1258-kotor-1-community-patch/ Once you have that mod installed, simply click on this mod's TSLPatcher.exe, click install and sit back and watch the TSLPatcher do its magic. Description: Obsidian Entertainment made full use of the Female Republic Soldier assets when developing K2 by using them on the Harbinger, the Sojourn and on Citadel Station as TSF Officers. Despite Bioware being the company who created them, they are mysteriously absent from K1 (unless you consider one or two 2 second long cameo appearances in the background of one of Dodonna's end game cutscenes). This mod will restore Female Republic Soldiers across various locations where male Republic Soldiers can be found, they can be found in the following locations: * Several females are located on the Endar Spire. * Two are on Manaan loading Kolto whilst a 3rd guards Lorgal in his prison cell. * Multiple new females can be seen in the background of Admiral Dodonna's ship at the end of the game. Update 1.3.0 adds brand new English VO for the female Republic Soldiers, whilst the VO was done using AI tech the VO is very (disturbingly) realistic. You can hear this amazing VO on Manaan! Preview of the audio: Recommended Mods: Republican Soldier Woman HD, gives these Female Republic Soldiers a HD reskin: https://deadlystream.com/files/file/1870-republican-soldier-woman-hd/ Known Bugs: This mod shouldn't have bugs but if there is Just PM me on Deadlystream. Incompatibilities: Report any unknown incompatibilities to me on Deadlystream.com Permissions: Do NOT claim credit for this mod and do not use assets from this mod without my permission. Special Thanks to: DarthParametric: For pointing out how version 1.0.0 of this mod was designed for K1CP 1.8 when the current version is 1.9! JCarter426: For sharing a superior TSLPatcher method! EpicStoffer: For pointing out the existence of ElevenLabs! ElevenLabs Website: For providing the most realistic AI VO I've ever heard! Bioware: For such an amazing game! Fred Tetra: For Kotor Tool! Stoffee: For TSLPatcher! Everyone who downloads the mod! Legal: THIS MODIFICATION IS NOT SUPPORTED BY BIOWARE/OBSIDIAN ENTERTAINMENT, LUCASARTS, DISNEY OR ANY LICENSERS/SPONSORS OF THE MENTIONED COMPANIES. USE OF THIS FILE IS AT YOUR OWN RISK AND THE ABOVE-MENTIONED COMPANIES OR THE AUTHOR IS NOT RESPONSIBLE FOR ANY DAMAGE CAUSED TO YOUR COMPUTER FOR THE USAGE OF THIS FILE.

A Mod for Star Wars Knights of The Old Republic Author: N-DReW25 0.1.3 Beta Release Date: 14.03.2024 Installation: Please install the K1 Community Patch FIRST before this mod! No exceptions! Simply click on the INSTALL.exe, click install and sit back and watch the TSLPatcher do its magic. Description: The Kotor games wouldn't be the same without the diverse array of items you can collect along your journey across the galaxy. With many of these items, you can mix and match your favorite items for the best defense or offense... or can you? A major problem I see in the first Kotor game is the distinct lack of loot drops... or more specifically, the lack of any "useful" loot drops. A good example of this are the Hold Out Blasters, these blasters are small pistols that do 1-4 energy damage with a chance of stun. These unique blasters are weaker then normal blasters, but unlike normal blasters, Hold Out Blasters have that chance of stun. This *could* give the player a choice between more energy based danage VS a chance for stun, however, you can only obtain the Hold Out Blaster on Tatooine and Manaan via merchants... so by the time you even have a chance to get the weakest Hold Out Blaster it's already been outclassed by the stronger weapons you found earlier in the game. Speaking of Hold Out Blasters, the strongest Hold Out Blaster is dropped via a mandatory enemy on Tatooine... this makes every other Hold Out Blaster in the game redundant, why even bother using any Hold Out Blaster when you can get the strongest one for free whereas the weaker ones are sold from merchants. This same problem applies to the armor you can obtain as well. On Taris, you can obtain the Echani Fiber Armor relatively early in the game... this has one big problem though. Echani Fiber Armor is a Class 4 armor type, Class 4 armors are some of the lightest armors you can find in the game with the weakest armor that you first obtain being a standard Combat Suit with 4 defense bonus (hence why it's called a "class 4"). So you start the game with the weak Combat Suit and you can then obtain the Echani Fiber Armor before any other armor piece, but once you upgrade this armor it turns from a 5 defense bonus to a 7 defense bonus. You can upgrade this armor to max capacity before finishing Taris, and after doing so the Echani Fiber Armor becomes one of *the* strongest Class 4 armors in the game. By obtaining this upgradeable armor so early, you no longer need to use the Zabrak Combat Suit, Echani Light Armor, Massassi Ceremonial Armor or the Cinnagar Weave Armor... and why would you? All those armors are weaker then the upgraded Echani Fiber Armor. And all that's just the tip of the ice burg! The K1 Loot Overhaul changes the loot of enemy drops, placeable objects, merchant inventories and even some quest rewards. This mod will make your next playthrough very interesting as you'll have the opportunity to use items you might never have considered previously, this mod will make your next playthrough a challenge as some items you've grown to use might no longer be available as it once was in the vanilla game, this mod will give you a genuine reason to save your credits and buy from merchants. Even if you don't use the new items you encounter, you can certainly sell them to buy better equipment. Known Bugs: This mod shouldn't have bugs, but if there are feel free to report it to me on Deadlystream. Do note that this mod is a Beta, some loot choice you might find to be odd might've been intended. As such, I'm open to player feedback to improve the mod going forward! Incompatibilities: Incompatible with the Enhanced Merchants mod. Please report any incompatibilities! Permissions: Do NOT claim credit for this mod and do not use assets from this mod without my permission. Thanks to: Bioware: For such an amazing game! Fred Tetra: For Kotor Tool! Stoffee: For TSLPatcher! Everyone who downloads the mod! Legal: THIS MODIFICATION IS NOT SUPPORTED BY BIOWARE/OBSIDIAN ENTERTAINMENT, LUCASARTS, DISNEY OR ANY LICENSERS/SPONSORS OF THE MENTIONED COMPANIES. USE OF THIS FILE IS AT YOUR OWN RISK AND THE ABOVE-MENTIONED COMPANIES OR THE AUTHOR IS NOT RESPONSIBLE FOR ANY DAMAGE CAUSED TO YOUR COMPUTER FOR THE USAGE OF THIS FILE.

Logical Datapads by Sdub & ebmar Version: 1.0.0 Description: One thing KOTOR seems to have is an almost endless supply of datapad items. Oh, but what are they called? Oh well “Datapad” of course. I was inspired by TSL for this mod as this is not a problem in TSL. What many people and especially new players don’t know is that the Datapad items are there sometimes to give hints to quests or flesh out the lore, Hell one of them straight up GIVES you the solution, but it’s lost in a sea of “Datapads”. After talking with @ebmar who is much more experienced with the TSL Patcher liked my idea and was onboard, I immediately got to work on new titles. I did my best to have them make sense in context and situation they are acquired. This modifies Datapads and Journal Items. (Which are really all datapads) I hope you enjoy, please let me know if you have any problems. I did my best to test it as much as I could. I did not encounter any issues. You will need to start a new game to see this mod work correctly. One final thing to note, this mod was made with widescreen mods in mind, I am unsure how it will respond to the normal aspect ratio. Installation: Run TSLPatcher.EXE and locate your swkotor folder Compatibility: Will not be compatible with anything that modifies existing datapad .UTI files K1R Compatible: Yes Tools Used: TSL Patcher ChangeEdit KOTOR Tool xoreos-tools Big thanks to the KOTOR Modding Discord!

WARNING: This Skin is intended to be used with another mod! Read the Installation section to follow instructions. The Mod intended is N-Drew's "Build a Calo" Mod. It can be found on DeadlyStream Description: With the release of N-Drew's "Build a Calo" mod, it would be fitting for someone to make a skin that describes a "damaged" Calo Nord. That's what I've done. I've given Calo some not too major burns on his face, and made his pants dusty and his jacket burned as well. With the addition of giving a "damaged" reskin, I've also upscaled the textures by 4x. Installation: Install N-Drew's mod first: https://deadlystream.com/files/file/2444-build-a-calo/ Follow the instructions given in the mods description! Afterwards, Copy all the files in the "Override" folder after extracting the .zip this mod is in to the Override folder in your Kotor game directory. Overwrite when/if prompted. IF USING N-DREW'S MOD: Make sure when you install N-Drew's mod, you install it with both Head and Body modifications. If NOT USING N-DREW'S MOD AND WISH TO USE THESE TEXTURES AS NORMAL: Change the "02" in each of the files name to "01" UnInstalling: Delete the files included with this mod, and replace with the files from n-drew's or another modders texture. Compatability: Compatible with everything but other mods that make the same changes as these mods. Listed as Not Compatible with K1R, because of it's intended use with a non compatible mod. Credits: GIMP JC and DarthParametric in DeadlyStream discord for giving advice on the stuff used in the .txi Bioware for making Kotor. N-Drew for making "Build A Calo", which makes the intention of this reskin possible. Permissions: Do Not include this in your own mod without my permission. Do not claim it as your own. Do not reupload to any other sites without my permission. Known Issues: Possible there may be some rendering issues due to the .txi's included with the mod, if so, remove from override. Legal: THIS MODIFICATION IS PROVIDED AS-IS AND IS NOT SUPPORTED BY BIOWARE/OBSIDIAN ENTERTAINMENT, LUCASARTS, DISNEY OR ANY LICENSERS/SPONSORS OF THE MENTIONED COMPANIES. USE OF THIS FILE IS AT YOUR OWN RISK AND THE ABOVE-MENTIONED COMPANIES OR THE AUTHOR IS NOT RESPONSIBLE FOR ANY DAMAGE CAUSED TO YOUR COMPUTER FOR THE USAGE OF THIS FILE

Based on this request thread, this mod attempts to inject a bit of extra variety into one of the minor elements of KOTOR. It makes some changes to the locked kolto tank room in Zelka Forn’s medical clinic in Upper City South on Taris. In the vanilla version of the game, the room has two placeable square kolto tanks, the floating bodies in which both use the PMHC04 (“Mullet Man”) head. For this mod, those were removed and the room model was edited to add two additional round kolto tanks, which match the ones along each side of the room. Additionally, the glass of the tanks had its texture replaced with one of the other variants in the game that is a bit darker and uses an environment/cube map for a hint of reflection. The empty tanks in the preceding room (behind Zelka Forn) were also edited for consistency. For the sanity of those with OCD, the position of the wall light at the back of the tank room was adjusted so it aligns with the centreline of the room. The floating body model from the kolto placeable was replaced with a new one with clean geometry at the neck join to facilitate using any player or NPC head. Additionally, an all-new female body variant was added, posed to roughly match that of the original male version. Two of these new body variants replaced the original two at the end of the room, with a number of additional bodies placed in the tanks along each side of the room. Zelka Forn’s dialogue when you enter the room for the first time seems to indicate that there should be more present than just the two originally depicted in the vanilla game. Due to limitations on the number of possible placeables K1 can deal with, outlined here by ndix UR, the floating bodies are now part of the room model. Installation: The mod includes a TSLPatcher installer for Windows users. Those on Linux or Mac should replace it with the appropriate HoloPatcher version which will run natively on their OS. Known Issues: This mod relies on editing the Taris Upper City South module's GIT (tar_m02ac). As such, it will not be compatible with any save in which you have previously entered the Upper City South level. Given that is the very first level you enter after leaving the starting apartment on Taris, that means you'll typically need to start a new game to utilise this mod. Per some of my posts in the original request thread, I initially experienced some issues with the tank’s glass texture affecting lighting on the body models (and even outright visibility in one instance) depending on the player’s viewing angle. I believe this has been resolved, but it’s possible the problem may still occur on hardware/OS combinations that I have no way of testing. The floating bodies use these player head models. There is no provision for dealing with a clone of the head the player is using now that the mod has switched to incorporating the bodies into the room model. A future update may replace these heads with NPC heads instead. Compatibility: Edited versions of both room models for the medical facility (M02AC_02G & M02AC_02H) are required for this mod, so will not be compatible with any other mod that edits those models. They still use vanilla textures however, so they will be compatible with texture mods. The mod will not be compatible with any mod that edits the two entries for the original tank placeables in the module’s GIT (Placeable List entries 0 and 22). It should otherwise be compatible with other mods that alter the Upper City South module, as long as they utilise a properly set up TSLPatcher configuration. Since it has come up in the comments, Kainzorus Prime's NPC Overhaul Mod is compatible, but ONLY if you install it before installing this mod (KP's mod will forcibly overwrite any and all module files, so install it before anything). Acknowledgements: Thanks to bead-v for KOTORMax and MDLEdit, and ndix UR for MDLOps 2K18 Edition, all of which were required at various points to get this to work. Thanks to ndix UR for many and various discussions and troubleshooting regarding models, compiling, textures, etc. Thanks to Dark Hope for the suggestion to change the bubble VFX.

This mod changes the models for the robes you receive on the Star Forge (Darth Revan’s robes for dark side or Star Forge robes for light side) to a modified version with the cape and belts seen on the cutscene version, but without the raised hood and mask. Alternative models with different arrangements of cape/belts/folded hood are available in the mod’s OPTIONAL folder. Once you have finished installing the mod, you may copy and paste the MDL/MDXs from relevant folder to the Override folder, overwriting when prompted. This mod relies on Sithspecter’s Revan's Flowing Cape and Belt Fix mod for the animations. You can download that mod from here: http://deadlystream.com/forum/files/file/709-revans-flowing-cape-and-belt-fix/ Extract n_darthrevan.mdl and n_darthrevan.mdx to your Override folder (you don’t need to install the rest of that mod’s files, but it is fine to do so). If you do not have this mod then you will not have any animations for the cloak or belts. How to Obtain: The mod retains the vanilla route to obtaining the robes, namely accessing the fabrication computer on Deck 2 of the Star Forge. However, in order to allow people to get the robes early, I have added a new fabricator on Dantooine. It is located inside the Aratech Mercantile room next to the Ebon Hawk's landing pad at the Jedi Enclave: In order to use this component of the mod, you must run the installer a second time and choose the option Dantooine fabricator from the drop-down list. Notes: This mod is not compatible with any other mod that changes/replaces the scripts for the computer on the Star Forge that grants you the robes, k_psta_replicat4 and k_psta_replicat5. The male version is a straight replacement for the PMBJ model, so it will not be compatible with any other mod that replaces/modifies that model, or changes the values for that column in appearance.2da. Because of the way animations work, the female version must be set up as a disguise, so it uses its own independent models and appearance.2da rows and is unaffected by changes to the PFBJ model or appearance.2da values. Note, however, that this means it is not compatible with custom female head models. The Darth Revan robes use the vanilla PMBJ01 texture, and is compatible with texture replacements from other mods. The vanilla texture for the Star Forge robes, PMBJ02, has no provision for the cape or belts, so I have provided a very basic replacement with those sections coloured. I suggest that you replace this with a better quality texture from another mod. I recommend ZM_StarForgeA08 from ZimmMaster's Revan's Jedi Robes mod. Download that mod here: http://deadlystream.com/forum/files/file/466-revans-jedi-robes/ Extract Zimm’s texture from his mod’s tslpatchdata folder, rename it to PMBJ02.tga, and then put it in your Override folder, overwriting when prompted. Make sure you do this after installing the current mod! Additionally, grab the TXI from the OPTIONAL folder and place that in the Override folder as well. Known Issues: There will be some clipping during certain animations. Some of this is related to the animations, some of it the meshes. If you spot something particularly egregious, then let me know in the comments and I may be able to address it if it is model-related. Currently there are no limitations on the Dantooine generator. You can fabricate either set of robes regardless of alignment, and you can make as many copies as you like. I may change this in future. If you are using the K1 Community Patch, the K1 Restoration mod, or another mod that has added danm13.mod to your Modules folder, you will get a warning from TSLPatcher that this file already exists and was skipped. This is intended behaviour and not an error. Acknowledgements: Thanks to Sithspecter for the n_darthrevan flowing robes animations, without which this mod would not be possible. Many thanks to Fair Strides and bead-v for looking over my scripts, checking for errors and streamlining syntax. Thanks to DarthTyren for his tutorial on camera placement (although I had to source the quaternion conversion elsewhere). Thanks to Salk for informing me of a missing ini config for one of the UTI files.

This mod changes the visual effects for all the laser blasts in the game. Energy blasters, ion blasters, disruptors, bowcasters - I've replaced them all. Except sonic, because really, sonic? In general, I've added more detail and made them match what's depicted on film as best as I could, when there was a visual reference. I took screenshots of the movies and got out my eyedropper tool and everything. The cores of the lasers are brighter so they look more like lasers, instead of having the whole thing as one flat color. I also messed around with light objects so each laser will illuminate surrounding objects in the appropriate color. For disruptors, I've included three color options: white, green, and yellow. The default install is white, like the original, and the other two are included as optional things.

Summary This mod adds five new lightsaber colors to Star Wars: Knights of the Old Republic, including the colors that were introduced in Star Wars: Knights of the Old Republic II – The Sith Lords. The new colors are cyan, orange, pink, silver, and viridian. The orange and cyan blades are similar to but visually distinct from Heart of the Guardian and Mantle of the Force. In KOTOR 2, the Heart of the Guardian and Mantle of the Force textures are simply reused, but I decided to retain the idea that these are unique crystals, so they are a little different from the standard orange and cyan. There is one item drop for each new color. Cyan: in some rubble near Juhani's haunt in the grove on Dantooine. Orange: on the corpse of Shaela Nur in the Tomb of Naga Sadow on Korriban. Pink: in the crystal cave on Dantooine. Silver: carried by an elite Sand People warrior in the desert on Tatooine near the entrance to their territory. Viridian: on the corpse of poor Nemo inside the ruins on Dantooine. Additionally, Suvam Tan on Yavin will sell the new crystals. He will have at least one and up to three of each color when he restocks his store. I thought it would be weird if he sold only the new colors, so for extra flavor he will also sell crystals in the original colors (blue, red, green, yellow, and violet). I have also swapped the placement of the other crystals in the cave around so they match the appearance of the crystal formations from which you receive them better. The blue crystal comes from the crystal formation that looks blue, etc. The lightsaber blade textures are based on the template I developed for my Lightsaber Visual Effects mod. I suggest that you also use that mod for aesthetic consistency. There are two versions of the mod: one that uses the original hilt models, and one that uses Hi Poly Tin Cans courtesy @VarsityPuppet. Installation Extract files from the downloaded archive. Run Extra_Saber_Colors_K1.exe. Click "Install Mod" and select your game directory (default name SWKOTOR). Optionally, copy the files from the Alternate Viridian folder to Override if you want to use the alternate version that is closer to the original KOTOR 2 viridian texture, replacing the previously installed files. Uninstallation Remove the installed files or replace from backups if necessary. Compatibility Ths mod uses TSL Patcher for compatibility, but various subtleties may make it incompatible with other lightsaber mods or mods that affect the same areas. This mod patches the following: upcrystals.2da danm14ac danm14ae korr_m39aa liv_m99aa tat_m18aa This mod must be installed after any non-TSL Patcher mods that edit those. On Tatooine, one instance of g_tuskenmale003 (Elite Warrior) has been replaced by a new creature file so only one of them will drop a silver crystal. The other instance of this creature is unaffected This mod utilizes the following model variations for lightsaber crystals and hilts: 200 206 207 208 209 This mod is compatible with my Darksaber mod. Credits KOTOR Tool – Fred Tetra TSL Patcher – stoffe, with updates by Fair Strides ERFEdit – stoffe, with updates by Fair Strides K-GFF – tk102 NWNSSCOMP – Torlack, stoffe, & tk102 Saber – Andrew Kramer & VideoCopilot.net tga2tpc – ndix UR Permissions I hereby grant nobody except myself permission to upload some or all of this mod anywhere for any reason. For any reason. If you would like to include any part of this mod in anything, then please contact me for permission. Disclaimers IT'S SO DENSE, EVERY SINGLE IMAGE HAS SO MANY THINGS GOING ON... Donations If you enjoy my mods and would like to show your support in a monetary manner, you may do so via PayPal with this donation link. For various legal and ethical reasons, this is entirely optional and is not a requirement to downloading or using any of my mods. I also do not create specific mods for hire. I make mods as a hobby and will most likely do so regardless of any donations or lack thereof, but modding does take up a lot of my time and every bit helps.

This mod will replace and update texture files. To Install 1. Download: Qarren HD.rar 2. Installation required JC's Dense Aliens for K1 1.0 (https://deadlystream.com/files/file/1290-jcs-dense-aliens-for-k1/ ) 3. Copy all files to the Knights of the Old republic's Override folder. (Example location - C:\Program Files (x86)\Steam\steamapps\common\swkotor\Override) 4. Remove N_QuarrenH01.tpc, N_QarrenB01.tpc. When/if prompted to overwrite files, press okay. 5. If you like the mod; leave a comment or endorse! (It would be much appreciated) Made with love

This mod adjusts the model files for TSL's main menu so that they properly fill the full screen width of widescreen aspect ratios (i.e. 16:9, 16:10). By default, the vanilla menus will have gaps in the background at each side of the screen. This is an inherent issue of the model being designed for 4:3 aspect ratios, so when a widescreen mod (or Aspyr's version) is used, areas of the model are exposed that were not anticipated by Obsidian. This mod addresses the issue by scaling the width of the background plane so that it spans the full width of the screen, and adding an additional VFX emitter to the bottom right of the screen so that the fog also spans the full width. Additionally, a minor correction is made to the Easter egg menu to properly apply the appropriate texture to the eyes, eyelids, teeth, and tongue of one of the Twi'leks, which are untextured in the vanilla version. See the attached pictures for an illustration of the changes. I have edited all 6 menu models, but in practice only 4 of those are typically used in the game (although TSLRCM does also make use of the Easter egg menu). I've included them all to cover all/most eventualities. Note that this mod primarily adjusts the menu models. No changes are made to the background texture, so any custom version of that texture will work with this mod as well. Per a user request, I have added adjusted logo images to address the stretching on those (they are not part of the model). Both vanilla and TSLRCM versions are included (permission to modify/redistribute the TSLRCM logo provided by zbyl2). As of v1.2, I have added optional TOR-style logos. These are based on the one GOG created for K1. Obviously this mod will not be compatible with any other mod that also alters/replaces the menu models like, for example, my own DS player menu mod (although that can be installed over the top of this mod). Any update for TSLRCM will presumably overwrite the Easter Egg menu and the logo. N.B.: This is NOT a widescreen mod! This is just a fix for when you are already using a widescreen mod like UniWS or Aspyr's natively widescreen version. Installation Instructions Copy the MDL and MDX files from the "FOR OVERRIDE FOLDER" and paste them into your Override folder If you have TSLRCM, additionally copy the files from the FOR TSLRCM, overwriting when prompted in both cases If you wish to use the TOR-style logo, versions are supplied to fix stretching for those without a GUI fix, or unaltered if you use a GUI fix mod. Make sure you delete any existing KOTOR2Logo.tga in your Override. If you use Aspyr's version of TSL on Steam with TSLRCM installed from the Workshop, you'll need to use TSLRCM's Workshop folder Override folder instead. If you use M4-78, use its Override. Acknowledgements Thanks to @bead-v for MDLEdit, that made compiling the menu models possible Thanks to @ndix UR for TGA2TPC Thanks to VarsityPuppet for testing 16:10 compatibility Thanks to @JCarter426 for helping with improving some aliasing issues via waifu2x

New textures for armor. Resolution 2048x2048. To Install 1. Download: Armor 7 HD 2. Copy all files to the Knights of the Old republic's Override folder. (Example location - C:\Program Files (x86)\Steam\steamapps\common\swkotor\Override) 3. When/if prompted to overwrite files, press okay. 4. If you like the mod; leave a comment or endorse! (It would be much appreciated) Made with love.

This mod attempts to address some of the issues with holograms in TSL. In the vanilla game, the majority of holograms have things like eyeballs and teeth being visible through the head. This is caused by the way the game handles transparency, in conjunction with the order in which it renders the individual meshes that a model is comprised of. By changing the hierarchy of the meshes within these models, certain elements can be occluded, resulting in less cases of “bug-eyed” holograms. This is not a perfect solution however. Because meshes do not self-occlude, visual glitches still remain during certain animations and camera angles, but this is likely the best that can be done without being able to make alterations the game engine itself. Additionally, because their interactions are primarily via hologram, this mod includes a revised version of Jinger/Kreia’s Admiralty Mod, which changes the appearance of Admirals Cede and Onasi to give them outfits more fitting of their rank. And while I was at it, I also revised certain appearances with head swaps and custom model merges (hair, etc.) to try and reduce overuse of the same heads and make NPCs a little more distinct. N.B.: TSLRCM is a requirement for this mod. It is not compatible with the vanilla version of the game. Specific Changes: Ebon Hawk: Bastila hologram (Light Side male Revan) Ebon Hawk: Bastila hologram (Dark Side male Revan) Ebon Hawk: Carth hologram (Dark Side female Revan) Ebon Hawk: Carth (Admiral Onasi) hologram (Light Side female Revan) Ebon Hawk: Canderous hologram Ebon Hawk: Jedi Master Atris hologram Ebon Hawk: Jedi Master Kavar hologram Ebon Hawk: Jedi Master Vash hologram Ebon Hawk: Jedi Master Vrook hologram Ebon Hawk: Jedi Master Zez-Kai Ell hologram Peragus: Administration Officer hologram Peragus: Dock Officer hologram Peragus: Maintenance Officer hologram Peragus: Medical Officer hologram Peragus: Security Officer hologram Peragus: Coorta hologram Peragus: Coorta thug #1 hologram Peragus: Coorta thug #2 hologram Harbinger: Republic Captain hologram Harbinger: Republic Navigation Officer hologram Harbinger: Republic Doctor/Med Officer hologram Harbinger: Republic Soldier hologram (partial) Harbinger: Admiral Cede hologram Harbinger: Admiral Onasi hologram Telos: Admiral Cede hologram Telos: Admiral Onasi hologram Telos: Admiral Onasi physical appearance Dantooine: Jedi Master Vandar hologram Dantooine: Jedi Master Vrook hologram Dantooine: Admiral Cede hologram Dantooine: Admiral Onasi hologram Nar Shaddaa (Goto's Yacht): Goto hologram/projector VFX Korriban: Bastila hologram (Dark Side male Revan) Korriban: Jedi Master Vash hologram (M4-78) Korriban: Jedi Kaah hologram (M4-78) Malachor V: Bao-Dur hologram Known Issues: There are still visual artefacts from overlapping sections of individual meshes, particularly noticeable in the case of the neck being visible through the jaw which occurs with certain animations and/or camera angles. This is not addressable by model edits. The problem is the way in which the engine renders overlapping transparency within a single mesh. The Republic soldier on the Harbinger has been replaced as of v1.3, however the helmet is still somewhat problematic. I'm not sure that is addressable without completely remodelling it, and perhaps not even then given its shape. Hair planes with alpha transparency don't function as intended as holograms, so typically look pretty terrible (e.g. Peragus Maintenance Officer). There's not much that can be done about those, other than completely remodelling the hair to rely on geometry rather than texture transparency. Dangly meshes used for hair bangs tend to look conspicuous due the requirement of placing them under the head mesh in the hierarchy. Particularly egregious examples may warrant having these elements being turned into skinned meshes in a future update. No doubt there are still a few holograms that need attention that I have missed. If anyone can provide a list of such cases, I may address it in a future update. Note that some holograms look fine in their vanilla state. I am only interested in hearing about ones with issues like those already addressed in this mod ("bug eyes", etc.). Compatibility: I've edited UTCs to point to custom appearance.2da entries, so the mod should be compatible with any other mod that only edits the vanilla 2DA entries. However, it will not be compatible with any mod that forcibly overwrites the module files this mod edits, that outright replaces the UTCs in question, or that also edits the UTC appearance values. Install any such mods first, then this mod afterwards. To make it clear, do not use this in conjunction with Jinger/Kreia’s Admiralty Mod or Darth Hayze's TSLRCM Compatibility Patch for said mod. They are superseded by this mod. A separate patch is provided for M4-78 to handle its version of the Korriban academy module. After installing the main content of the mod, run the installer a second time and select the "Additional Patch" option from the drop down menu. An optional patch has been added to give the robe-wearing holograms unique named textures for use with robe mods that use the same filenames as vanilla robe textures. This will prevent texture issues (but note that they will still be wearing the vanilla-style robes). Acknowledgements: Thanks to Fair Strides for creating a customised version of TSLPatcher to handle filename clashes, which made this mod practical. Thanks to Jinger/Kreia for permission to release a revised version of the Admiralty mod's content, the textures from which (with modification) are used in this mod. Thanks to zbyl2 for permission to redistribute TSLRCM's module files to ensure compatibility for Steam Workshop users Thanks to JCarter426 for permission to use the female Republic soldier body model from "JC's Republic Soldier Fix for K2" and his adjusted N_CommM04 texture from "JC's Minor Fixes for K2". Thanks to bead-v for KOTORMax and MDLEdit, and ndix UR for MDLOps 2K18 Edition, all of which were required at various points to get this to work. Thanks to ndix UR for TGA2TPC Thanks to Malkior for providing the impetus for the mod via this thread. Thanks to L0ki194 for offering input on the case of the Harbinger's "Doctor" vs "Medical Officer".

Good afternoon. I worked very long on these textures. I can call them one of the best of my works. The archive contains 2 textures: the texture of the woman's form and the shape of the man. The resolution of the textures is 2048X2048. This resolution allows you to carefully draw each piece of equipment. Attention was paid to everything: rivets, buckles, shadows, cloth, chevrons. Enjoy.

This mod will replace and update AstromechHD texture files. To Install 1. Download: AstromechHD 2. Copy all files to the Knights of the Old republic's Override folder. (Example location - C:\Program Files (x86)\Steam\steamapps\common\swkotor\Override) 3. When/if prompted to overwrite files, press okay. 4. If you like the mod; leave a comment or endorse! (It would be much appreciated) Made with love.

This mod will replace and update Darth Bandon texture files. To Install 1. Download: Darth Bandon HD 2. Copy all files to the Knights of the Old republic's Override folder. (Example location - C:\Program Files (x86)\Steam\steamapps\common\swkotor\Override) 3. When/if prompted to overwrite files, press okay. 4. If you like the mod; leave a comment or endorse! (It would be much appreciated) Made with love.

New textures for armor. Resolution 2048x2048. To Install 1. Download: Armor 6 HD 2. Copy all files to the Knights of the Old republic's Override folder. (Example location - C:\Program Files (x86)\Steam\steamapps\common\swkotor\Override) 3. When/if prompted to overwrite files, press okay. 4. If you like the mod; leave a comment or endorse! (It would be much appreciated) Made with love.

AUTHOR: Sith Holocron ORIGINAL RELEASE: 21 AUG 2022 GAMES: Star Wars Knights of the Old Republic 1 [This mod will not work in Star Wars Knights of the Old Republic 2 as intended. Instead, use this mod specifically made for KotOR2 instead.] Description: So . . . this is a part of another mod that I’ve had on my computer/s for some time but I hadn’t gotten around to putting out there to the public. Until now. This all started out with getting higher resolution icons for crystals in TSL. There are way more crystals in that game than in KotOR1. However, it seemed logical to narrow the focus of that mod by releasing a pared back version and release it as a KotOR1 stand alone version. That’s what you have here – a test run for a possible TSL version later on. I found source pictures of many crystals over the years and took care to try and match the color, crystal type and - when possible - the orientation of the crystal to match what you saw in vanilla. Yes, I included the Mantle of the Force and the Heart of the Guardian crystals. And yes . . . I included the Krayt Dragon Pearl. From the pictures you’ve (hopefully) seen on the download page, you’ll notice that some of the crystals appear to be duplicated. That’s how it is handled in the game and it wasn’t an error on my part. Installation: Drop the TGA files into your Override folder. If you are using this mod with other mods that include re-texturing of the crystal's icons, install this mod after them. Uninstall: Remove the TGA files from your Override folder. Legal Disclaimer: All materials and copyrights belong to LucasArts, Bioware and Obsidian Entertainment Inc. I own none of the materials, and I'm not making any money out of this mod. It is to be distributed as-is without alteration, unless by permission of me. This mod is not to be distributed for profit, either. I hereby state that I specifically do NOT wish this mod to be uploaded to Steam Workshop. Ever. I may release this on NexusMods at a later date but I don't wish others to do so. Usage in other mods must be requested and approved by me before your use. Special Thanks: Thanks to YOU for giving this mod a chance! Won’t you leave textual feedback on the download page? (I like to know what I’ve done right , you see…)

Animated terminal texture. When creating, I was guided by the terminal interface. Texture resolution 3072x3072. The resolution in the game is 1024x1024.

The archive contains 2 textures: the texture of the woman's form and the shape of the man. The resolution of the textures is 2048X2048. This resolution allows you to carefully draw each piece of equipment. Attention was paid to everything: rivets, buckles, shadows, cloth, chevrons. Enjoy.

This mod makes some alterations to the arena in the Taris Upper City cantina. The primary change is the removal of the original low quality crowd sprites. In the vanilla game these are VFX nodes. It appears that Bioware's original intention was for these to be animated, but that was likely disabled due to performance issues on the Xbox. Subsequently, most of the sprites are lacking arms. Another issue is the scaling. The sprites are completely out of scale with the rest of the game world, appearing to be about half the height of an average human. This was possibly an attempt to skew the perspective, an attempt to make the arena look bigger than it actually is. The original sprites have been completely removed in favour of better quality crowd sprites ported from The Old Republic. Additionally, the bays housing the crowd have been resized in order to fit proper human-sized figures. To comply with recent local ordinance changes, transparisteel safety screens have been fitted for the crowd’s protection. Other minor changes include some texture swaps on the roof section and a dummy door model to hide some unsightly fog on the original. Additionally, players participating in duels should now correctly face their opponent, and give an alignment-specific emote when they are announced. Opponents will now politely wait until their name is announced before giving their little fist pump. After some complaints by their union about a lack of proper medical services, defeated opponents are now healed back to full health post-match rather than being left to limp around. The view screens in the cantina have been upgraded to have a dynamic display of the current arena rankings. These will change as the player progresses up the ranks. The placeable computer screens have all had their positions adjusted so that they properly contact the walls they are supposed to be mounted to, and to align them with one another. Ajuur the Hutt’s dialogue has also had some minor surgery performed on it, to better deal with player and party positioning. Carth should now properly face Ajuur and the player during his relevant interjections, and won't be replying from across the room. N.B. - Because alterations are made to the module's GIT file, the mod requires a save before entering the Upper City cantina for the first time. It is thus best suited for a new game. If you load a save after having entered, none of the screens will line up properly with the computer placeables. Known Issues: If you initiate a conversation with Ajuur while the party is standing in the corner with the medpac bin, you will likely see them jump out of frame as they are moved to their now scripted fixed positions directly in front of the Hutt. That's an unfortunate consequence of the way it was handled, but the camera angle should mask the transition from pretty much anywhere else. Acknowledgements Thanks to @bead-v for MDLEdit Thanks to @ndix UR for TGA2TPC Special thanks to @JCarter426 for helping with some scripting, particularly extended troubleshooting of the Ajuur party positioning script Thanks to @Salk for alerting me to the TSLPatcher problem with v1.0 Thanks to @A Future Pilot for pointing me to the fixed version of TSLPatcher Thanks to @Publicola for informing me about the ability to click through announcement animations Some screenshots feature @Sithspecter's High Quality Blasters The video features @ndix UR's KOTOR High Resolution Menus Crowd and glass textures ported from The Old Republic MMO

Here's another bit of scrap from my junk pile that someone may find a use for. A little while back I made some thigh-high boots for Bastila when Quanon was working on her Taris prisoner outfit. He didn't end up using them, so I tossed them into the abyss with my other rejects. The other day I was looking at the female Twi'lek body models for some reason, and I noticed that (the base version at least) has painted on thigh-high boots. On a whim, I imported my boot mesh and noted that, height-wise, they lined up almost perfectly. Even more interestingly, my UVs were very close in layout to the Twi'lek's legs, so much so that is was fairly trivial to rejig them to fit the existing textures. In practice I'm not sure how much purpose this serves, as from a distance it's basically impossible to tell the difference between painted on boots and my physically modelled boots, at least using vanilla textures, but I figured someone might find some use for it. Because the vanilla female Twi'lek model has existing animations (dancing), I have provided a hex edited copy of the original which is now used as the supermodel. That way the booted variant is a simple Override drop-in with no 2DA editing required. I have also provided some additional versions suitable for use as player bodies that use the regular S_Female03 supermodel, as well as being scaled to large, medium, and small. I've supplied modified versions for those variation textures that don't have boot textures. There is also an optional variant of the base green variation which has black boots instead of red. The intent of course, given how terrible the vanilla textures are, is that someone will release a proper high quality retextured version, but the NPC portion is useable out of the box if people so desire. You are free to incorporate the contents of this mod into your own work, as long as proper credit is provided. Do not redistribute the mod by itself.

Summary This mod allows those playing as a female character to romance Bastila, an option available only for male player characters in the original release of the game. The female version of the romance will play out just as the male version, through talking to Bastila as your player gains experience and by choosing certain dialogue options. The romance can also be ended just as the male romance can, by choosing or avoiding certain dialogue options. Lines will still vary depending on the player's gender; for example, Bastila will not call a female player a man, nor compare her to any man. I have executed this by removing certain lines, or certain parts of lines, that lacked an alternate take for a female player, and in some cases voided the existing female versions in favor of the romance lines. I'm not entirely satisfied with all of these changes - in particular, the male version still has a lot more dialogue, and I don't think that's fair - but my priority was to make everything flow naturally, with minimal editing. Also, this should not interfere with the Carth or Juhani romances; you should be able to go through those as well Bastila's if you so desire. The game does not take issue with it. The romance system is surprisingly straightforward, compared to later BioWare games. As such, I may consider adding a bit of complexity in future updates. Installation Extract files from the downloaded archive. Run Install.exe. Click "Install Mod" and select your game directory (default name SWKOTOR). This mod only supports the English language version of the game at this time. Uninstallation Remove the installed files or replace from backups if necessary. Compatibility This mod is compatible with my Pan-Galactic Flirting mod. This mod patches the following: k_hbas_dialog.dlg (Bastila's global dialogue) lev40_saul403.dlg unk44_evilbast.dlg This mod may not be compatible with any other mods that edit those files. This mod also installs the following new VO: NGLOBEBAST06951_ NGLOBEBAST06952_ NGLOBEBAST06953_ NGLOBEBAST06954_ NM44ACEVIL01901_ This mod will not be compatible with any mods utilizing those names for WAV or LIP files. This mod patches the modules lev_m40aa, unk_m44acd, and sta_m45ac and may not be compatible with other mods that affect those areas. TSLPatcher is utilized for better compatibility, but there's never any guarantee. This mod must be installed AFTER any non-TSLPatcher mods that edit those areas. This mod includes bug fixes for Bastila's romance scripts on the Unknown World and the Star Forge. You should NOT install another mod to fix these problems, as that would override this mod's changes that remove the gender checks. Credits KOTOR Tool – Fred Tetra TSL Patcher – stoffe, with updates by Fair Strides CSLU Toolkit – Center for Spoken Language Understanding DLGEditor – tk102 ERFEdit – stoffe, with updates by Fair Strides K-GFF – tk102 KOTOR Savegame Editor – tk102 LipSynchEditor – JdNoa NWNSSCOMP – Torlack, stoffe, & tk102 Bug fix reconnaissance courtesy Markus Ramikin's Bastila Romance Scriptfix Global variable reconnaissance courtesy Amandalore the Ultimate's save file Permissions Mod JC's Romance Enhancement for K1 Mod Author JCarter426 Game Star Wars: Knights of the Old Republic Attribution Preference "Romance Enhancement by JCarter426" or "uses JC's Romance Enhancement" or some other reasonable phrasing. Attribution Only License (AOL) * You've got mods! * The creator of this mod has authorized the contents of this mod for public use. Other modders are free to use and edit materials from this mod and include them in other mods. This license applies to everyone equally and no further explicit permission from the original mod creator is required, provided the terms of this license are followed. The user must provide clear attribution for the source and creator(s) of these materials, following the specified attribution preference. The file that contains this attribution must be included along with all the other mod contents. (For example, crediting the original mod creator in your mod's description on a website, but not in any file someone would actually download, would be a violation.) The user must include any additional credits as indicated. This license applies only for the use of these materials in other mods (i.e. a form of software accessed within a video game). This license does not grant the user unlimited power to distribute these contents, edited or unedited, even if attribution is granted. These materials are being offered to encourage the creation of new mods that alter the game experience. (For example, distributing these materials as a mod resource on another website, or uploading the entirety of the mod as a "new" mod without really changing anything, would not be in the spirit of this license.) Where appropriate, it would be nice to provide a link to the original mod and/ or tag the original mod creator. However, this is not mandated. This is just a polite suggestion. Disclaimers THIS GAME MODIFICATION IS NOT SUPPORTED BY OR ROMANTICALLY INVOLVED WITH BASTILA SHAN, <FULLNAME>, LUCASARTS, OR BIOWARE. BIROMANTIC ORIENTATION IS NOT SUPPORTED BY NAND GATES. Donations If you enjoy my mods and would like to show your support in a monetary manner, you may do so via PayPal with this donation link. For various legal and ethical reasons, this is entirely optional and is not a requirement to downloading or using any of my mods. I also do not create specific mods for hire. I make mods as a hobby and will most likely do so regardless of any donations or lack thereof, but modding does take up a lot of my time and every bit helps.

Edited model - DarthParametric Re-texture of PMHC01, for Star wars: Knights of the Old Republic. Texture Resolution 1024X1024. The archive contains 5 textures of the head. 3 textures for underwear. 5 icons and 2 .txi. To Install 1. Download: PMHC01 HD 2. Copy all files to the Knights of the Old republic's Override folder. (Example location - C:\Program Files (x86)\Steam\steamapps\common\swkotor\Override) 3. When/if prompted to overwrite files, press okay. 4. If you like the mod; leave a comment or endorse! (It would be much appreciated) Made with love.

Those of you familiar with Party Model Fixes by redrob41 know it is a cool mod that fixes up some of the game's models for your K1 party members. Cool enough that I figured it was time for a sequel -- we are going to do even more fixing up of our compatriots: Carth: His unique outfit has a holster which hung by some leather that was missing a texture on one side, rendering it invisible from certain angles. This fixes up that issue, alongside some bonus texture mapping fixes to his opposite pouch and jacket, including the collar fix that redrob41 worked on in their original mod. Zaalbar: Our wookiee friend had some hairs that went missing depending on the angle, again due to missing textures on the opposite sides of some geometry. This fixes that right up, alongside some other messy texture mapping for some of his fur. Jolee: Sometimes Jolee likes to just hang out in a swim suit, socks, and... some kind of bizarre ankle brace. I could not tell you what it does, but it is unlikely to be doing its job given that it disappears when viewed from the other side. This fixes up another classic case of one-sided texture syndrome, and makes some small improvements to texture mapping. Mission: Originally Mission was set to just use adult models when wearing various armors, likely due to time constraints. Therefore, I have made some alternate armor models more suitable for a kid to use. These are just edited versions of the vanilla models, with similar texture mapping, so it is all very vanilla-looking and compatible with any texture mods. This will add the new models to your game and set her appearance.2da row to use them. Her unique models in vanilla are fixed up less noticeably to reflect the changes, and include similar texture mapping fixes to the arms that redrob41 did. This mod is intended to be installed after redrob41's Party Model Fixes, but does not require it to work. All changes will be applied immediately, and do not require that you start a new game. Installation: Download the included .7z file and extract it anywhere of your choosing on your computer. You can unzip a .7z file with tools such as Archive Utility on MacOs, or by with free programs like PeaZip on Windows and Linux. Simply run this installer, directing it to the location of your main game folder with the executable. For Steam installations, this would be "Steam\steamapps\common\swkotor". The installer is an .exe file, which Windows can run natively. Mac and Linux users might consider checking out Cortisol's HoloPatcher -- a new tool that is meant as a cross-platform alternative to traditional KotOR mod installers. Alternatively, executable files can be run on Mac or Linux with programs using tools such as Wine. If you are having trouble with either of those options, I have included some instructions for manual installation in the download's "ReadMe" file. If you happened to have previously installed another mod which placed an appearance.2da file in your override folder, the installer will give you a warning reporting as much upon completion. This is of no concern -- so long as you get no other warnings or errors, the mod is installed correctly and ready-to-go. The mod will overwrite any conflicting model files (.mdl/.mdx) in your override folder, but not any appearance.2da file it finds there, merely edit the existing one. Be sure to back up anything you want to keep ahead of time. The Included Files list below contains all the files that will be installed to the override folder. Uninstallation: Delete all of the files listed below from your override folder. If you had an appearance.2da file in your override folder prior to installing, you can find a backup version in the mod's "backup" folder, which was automatically created during installation, and place that in your override. If you are unsure whether or not a previous mod had put that file there or not, it is better to make use of the backup. Included Files: Compatibility: This mod is fully compatible with any mod which does not replace any of the model files (.mdl/.mdx) listed above. Files that edit appearance.2da are compatible so long as they do not change Mission's armor model cells. If you intend to install Party Model Fixes by redrob41, I recommend doing so before installing this mod, or what you install here will be overwritten. Expect compatibility with most any texture/reskin mods -- so long as they do not replace models (.mdl/.mdx files) as well as textures, there should be no conflict. Acknowledgments: Thanks to seedhartha, NdixUR, Symmetric, and Purifier for making importing to Blender simple using KotORBlender, and Cortisol for making file extraction easy with the Holocron Toolset. I would also like to thank Stoffe and Fair Strides for making inter-mod compatibility infinitely more feasible with TSLPatcher. Shout-out to ConansHair for pointing out that weird bright spot on Zaalbar's rump. This modification is not supported by Obsidian Entertainment, Lucasarts, Disney or any licensers/sponsors thereof. Use of this modification is at your own risk and neither the aforementioned companies nor the author may be held responsible for any damages caused to your computer via this modification's usage.

This mod plays an ambient-track to complement "T3 finding the Ebon Hawk" cutscene in Peragus' Hangar Bay. Preview Description It edits the entire cutscene to not-skippable, then sets the ambient-track to `mus_s_positive` -- an original audio file that’s located in `streammusic` folder. It also stops the area BGM momentarily for 11 seconds to not have the AT overlaps with, should then it play back again. Requirement It is required for users to have TSLRCM v1.8.6 installed to their game for this mod to successfully working – both in installation process and in-game. K2CP is not strictly-required, but is strongly-suggested to have as well as this mod were made with CP’s compatibility in-mind. Compatibility Should be optimally-compatible with any mods and builds -- long as not affecting `hangcam.DLG` and `mus_s_positive.WAV/MP3`. Note: It is safe now for user to install this version on top of any currently installed version. It supersedes and overrides their functionality so compatibility is much ensured. ** -- for installation instructions, run the installer [Install.EXE]. Known Issues N/A Final Remarks There's always room for improvements; reviews, critiques, comments, suggestions, questions and feedbacks are much appreciated. PM me here, write them on my feed or leave any on the mod's page as you please. And thank you! for downloading, and using this mod. Hope you enjoy the mod as much as I do! Redistribution Do not redistribute this mod or re-release it on any websites. I'd love providing direct support to my work, which wouldn't be possible if they're scattered in the Unknown Regions. If you are to re-use the assets to a project you will be releasing, please be kindly to ask for permission first -- that way I know what's up. Credits The Almighty Force. BioWare, Obsidian Entertainment, and LucasArts for "The Old Republic" video-game franchise. DarthParametric for past-present knowledge, and all his creation that I learn from. JCarter426 and Inyri Forge for all their work that I look up to. I learned a lot from their mods and been approaching a lot using their method. Fred Tetra for KotOR Tool. stoffe for TSL Patcher and Fair Strides for the updates. tk102 for DLGEditor. Cortisol for Holocron Toolset. All the Tool Makers wasn't mentioned -- can't make it without y'all! All streamers of DeadlyStream. All modders either active or inactive. DeadlyStream for being a home -- a place to hang-out, to discuss and hosting my work, and all their staffs for tirelessly improving-maintaining the site. DeadlyStream's #modding [Discord's] channel. -eb

Cue the Korriban monastery in KotOR. The charming place where Malak's foul-mouthed underlings train, aspiring to one day achieve Bandon levels of douchery. Despite all their shortcomings, I did always like the militarized aspect of the Sith they had in place. This mod alters relevant characters all over the planet, following a sort of dress code, almost. Students wear standard uniforms while away from the academy (though most still do wear them inside as well), with higher ranked Sith having more distinct uniforms themselves. Anyone expecting to break a sweat, or hopefuls seeking to gain prestige like Yourself are dressed in battle-ready robes. There's some further details - Czerka officers wear the company drab; the bay mechanic switched to more comfortable working clothes; female Twi'lek residents dress modestly now (as supposed? Very likely a mistake, as they had actual clothing equipped but their appearance was the identical albeit static alien one); crazy hermit Jorak Uln has a tattered old uniform; A redeemed Yuthura will now ditch the Sith outfit in favor of simple clothing... I upgraded all lite Sith appearances to albino, including Hijata (whose dialogue I chose not to restore). Citizen lite models were not upgraded, better turn to another mod for that such as K1 Lite Upgrader by @AFP. Other than this, I took the liberty of minimizing the dreaded "clone effect" since it's especially egregious on Korriban, having up to 5 instances of the same head in the same module and at times a few feet from each other. Also, it turns out in respect to Korriban that plenty of files are a proper mess. Included are fixes for various inconsistencies, appearance type oversights, misgendered npcs (thus restoring some gender specific dialogue; thanks to @ebmar about the Tariga finding - Tariga Gender on Tamlen DLG Fix), wrong soundsets, and blank inventories/feats/spells. Install & Compatibility Run the TSLPatcher. Ignore any warnings about skipping .mod files. Patching this on top of K1CP might result in odd incidents such as duplicate drops and merged appearances from both mods. In case I needed to say it, other mods overhauling characters on Korriban aren't 100% compatible, most notably JC's Korriban: Back in Black for K1. This mod only works with the English version of KotOR. Credits KOTOR Tool..................................................................................Fred Tetra TSLPatcher...................................................................stoffe & Fair Strides ERFEdit.........................................................................stoffe & Fair Strides DLGEditor............................................................................................TK102 K-GFF...................................................................................................TK102 DeNCS................................................................................JdNoa & Dashus NWNSSCOMP.........................................................Torlack, stoffe & TK102

THIS PROGRAM IS MADE BY FRED TETRA I TAKE NO CREDIT FOR THIS PROGRAM, i also have some of the map files from the site if any one has more pm or email me, ill upload them here. here is the original readme for this program. Kotor Tool v1.0.2210.16738 (2006-1-19 12:38) About this program... I originally wrote this tool so I could experiment with 2DA files and scripts. Through feature suggestions, it has grown quite a bit into what many tell me is a pretty handy utility. Thanks to all of those who have taken the time to make those suggestions and put up with the occasional bug that creeps in at 2:00 in the morning! ----------------------------------------------------------------------------------------------- Requirements... I should (and will!) mention in the readme file that you need to have the Microsoft .NET Framework 1.1 installed. You can get it at: http://download.microsoft.com/download/a/a/c/aac39226-8825-44ce-90e3-bf8203e74006/dotnetfx.exe ----------------------------------------------------------------------------------------------- Contact info... fredtetra@hotmail.com ----------------------------------------------------------------------------------------------- Quick start instructions... Unzip the kotor_tool.exe, ImageTools.dll files and the Maps folder to a directory. The first time you run the program, it will attempt to detect where you have installed KotOR and configure some of the directory paths it needs to work. It will then bring up the path management screen so you can verify them. To work with BIF files: Expand the BIFs item on the tree view. You can: - Select any *.bif file from the tree view, then click Extact to extract every file in it to a directory - Select any file in a bif, then click Extact to extract it to a directory - Select any file in a bif, then click Hex View to see it in Hex/ANSI/Unicode - Double-click on any 2da file to bring up the editor for it. You can then edit the values and write the file to a directory. (Most likely the override folder in yout KotOR folder) Clicking on the column header in the editor grid will sort it based on the values in that column. Repeated clicking will change the sort direction. - You can also open the 2da v2.b file editor from the File menu for editing. NOTE: You do not have to open the chitin.key file first. - 2DA editing features: * Add line to end, delete any line, right click to insert new line. Be careful with those last two! * You can renumber the row labels from the right-click menu * Undo all changes * Reset sort to "as opened" mode (press F5 or use menu * Import and export your 2da files in XML format - Double click on any nss/vis/txi file to bring up the editor for it. You can then edit the text and write the file to a directory. - To extract a .mdl (Model) file, double click on it; the model will be extracted and converted, along with any required TGA-format textures. NOTE: You must have CChargin's Extract0-5 program installed in the same directory as Kotor Tool. To work with RIM files: Expand the RIMs item on the tree view. - Select any *.rim file from the tree view, then click Extact to extract every file in it to a directory - Select any file in a rim, then click Extact to extract it to a directory - Double-click on almost any file in a rim to launch the GFFEditor, assuming you have installed it in the kotor_tool directory - Control-Double-click on almost any file in a rim to launch text editor with a syntax-colored version of the GFF file's contents - Shift-Double-click on almost any file in a rim to launch text editor with a plain-text version of the GFF file's contents. To work with ERF files: Expand the ERFs item on the tree view. - Select any file in a rim, then click Extact to extract it to a directory - Double-click on almost any file in a rim to launch the editor for it. - TPC files now can be viewed with the built-in image viewer. You can also save the files in TGA format from the viewer. - If you like using the keyboard to navigate the treeview, you can use the spacebar to open the Image Viewer with a TPC file selected. - If the Image Viewer is open, moving up and down the list of TPC files with the arrow keys will show each image in turn. Note: some files cannot yet be viewed. - To view tpc files in an external app, hold down the Shift key while double-clicking. You need tpc2tga and an image viewer. (see below) - Some tpc files have a format that is not yet understood. Attempting to view one of these files may either show a strange image or crash the program. Notes: * You can specify whether or not you want to automatically convert extracted .tpc files to TGA format from the Tools | Options... menu. This is only used with the external tpc2tga program. * If you also want to be able to view the .tpc files using an external program you must install a TGA file viewer and specify the path to it in the Path Manager. You can download a free TGA viewer at http://www.creabit.com/viewer/ * You can specify whether or not you want the BIF tree built at program startup or not from the Tools | Options... menu. If you leave the checkbox unchecked, the BIF portion of the tree view will only be built when you attempt to expand it. Want to unlock all of the movies and music in KotOR II:TSL? In your swkotor2.ini, set the following: [Game Options] UnlockedPlanetSongs=1023 [Movies Shown] Movie10=0 Movie 9=0 Movie 8=0 Movie 7=31 Movie 6=255 Movie 5=255 Movie 4=255 Movie 3=255 Movie 2=255 Movie 1=255 Movie 0=255

This mod overhauls the appearance of Janice Nall and her Incomplete Droids in her store. # Background # I was in a playthrough and looking to overhauls things that're necessary; this is one of them. # About this Mod # This modification makes Janice Nall more like an expert droid technician; with those flashy looks of hi-tech armor she's wearing and her Incomplete Droids will looked like they're meant to be; an unfinished paint jobs with missing parts in their anatomy. Updated in v1.1.0: Adds an additional texture option for Incomplete Droid; which texture now immensely have the look of C8-42-GE3 [Elise Montagne's personal-assistant droid] with unfinished paint jobs. Updated in v1.1.1: An additional installation targeted to earlier version user; which is a fix for Janice Nall's model provided by @DarthParametric [Female Armour Collar Fix]. # Final Remarks # I have plan to change T3-H8 appearance to something more unique in the future update; to make it different from common utility droids spreads around the game. We'll see. 🤞 Critiques, comments, suggestions, questions and any feedbacks for the next update are very much appreciated- just PM me, write them on my feed or leave any on the mod's page as you please. And thank you! for downloading, and playing this mod. Hope you enjoy the mod as much as I do! Installation: Run the installer [TSLPatcher.exe] To install Incomplete Droids' alternative texture; simply run its option, or you could also drop the included file to the 'Override' folder. Overwrite when prompted Uninstallation: Replace the installed files with what is stored inside the generated 'Backup' folder. Particularly the tar_m02ab.mod, put back the file to the 'modules' folder; overwrite when prompted. Compatibility: This mod works either with vanilla or modded state of the game. Will be compatible with Kainzorus Prime's "[KotOR] NPC Overhaul Mod"- make sure to install this mod after the said mod has. Will not be compatible with any mods that overrides the tar02_brokedroid.utc and tar02_janice021.utc or anything that force-overrides the contents of tar_m02ab.mod. For this mod to be effective you should at least load a saved game before entering the Upper City North [tar_m02ab] module Redistribution: You can redistribute this mod or re-release it to any website as long it fits their policies; just don't claim it as your own. And be advised that I will not provide support to any technical problems there. If you are to re-use the assets to a mod you will be releasing, you don't have to ask for permission- but your generosity is very much welcome. Also, make sure to give credits to SpaceAlex, DarthParametric, BioWare & LucasArts with the release; as inside this mod are theirs. An appreciation to yours truly is also a warm welcome, welcome. Credits: DarthParametric for the past-and-present knowledge which allows me to create customs for the game, and also for granting my request on having his "Female Armour Collar Fix" included with this mod SpaceAlex for the Modder's Resource: K1 Enhancement Pack which its Twi'lek's head texture and Protocol Droid's texture as the primary base to work on to jc2 - whom recent release of Lehon Mandalorian Expansion triggered me on running a playthrough which resulting on this project Rece for the Animated Texture Tutorial which very helpful back then for me to understand how an animated clothing works ROTNR for the Creating Module Files in KotOR tutorial which helps me on creating the custom tar_m02ab.mod included with the mod Dark Hope, VarsityPuppet, JCarter426, redrob41, CarthOnasty, Sithspecter, DeadMan, Salk, Quanon, Kexikus, Silveredge9, Logan23 and N-DReW25 for an inspiration to most of the creation Fred Tetra for the 'amazing' KotOR Tool bead-v for MDLedit and KOTORmax Werner Rumpeltesz for PlainEdit.NET ndix UR for tga2tpc All the inspiring streamers on DeadlyStream All the inspiring modders either active or inactive DeadlyStream for being a home; a place to hangout and to discuss -eb

*********************************** Knights of the Old Republic *********************************** TITLE: Ebon Hawk Camera Replacement AUTHOR: LDR FILENAME: ebon_hawk_camera FILESIZE: 3 KB -------------------------- INSTALLATION INSTRUCTIONS -------------------------- Simply put the 2da file and the vis file into the Override folder in the KotOR directory. To uninstall, remove the 2da file and the vis file from the Override folder in the KotOR directory. ------------ Permissions ------------ You may not use any assets of this mod in your own mod without first contacting me (and Darth Parametric). ------------ DESCRIPTION ------------ Changes the Ebon Hawk camera to where it reduces the zoom on the player, akin to the "default" camera. ----- BUGS ----- None I hope. If you find any please post them in the comments. I will address them as soon as I can. -------------- COMPATABILITY -------------- So long as there isn't another mod that makes edits to the camerastyle.2da or m12aa.vis, there shouldn't be any mod conflicts with K1R or any other KotOR 1 mod. Note: there will be a hard incompatibility with any other mod that edits the m12aa.vis file. It can only be resolved with manual merging, since TSLPatcher doesn't allow for dynamic patching of VIS files (or LYTs). ------- Credits ------- Darth Parametric for his m12aa.vis file that fixed an issue where some Ebon Hawk rooms weren't visible due to the increased camera radius. Fred Tetra for his very useful KotOR Tool. Fair Strides. All of you who downloaded this mod! Thank You!

This mod makes some minor changes to the forcefield in the Upper Shadowlands on Kashyyyk that gates access to the Lower Shadowlands. In the vanilla game, the forcefield is never actually disabled. Rather, the sound effect is simply turned off while the camera is pointed away from the forcefield, followed by an immediate area transition. It appears that Bioware did this due to issues with opening and closing doors via scripting. Additionally, there are no apparent controls for the forcefield, simply a frame and the field itself. The level model containing the forcefield has been edited to add a computer panel, fix a gap above the forcefield via some adjustments to the frame geometry, move some vines out of camera shot during dialogue, and prevent grass planes from spawning too close to the ramp and clipping through. The dialogue that occurs when interacting with the field has had some scripts injected to play animations implying that the forcefield is being switched off via the control panel. Jolee will now approach the control panel when the dialogue starts, and will face it when disabling the field. The field itself is now shown shutting down before the party transitions to the Lower Shadowlands. Additionally, there appears to have been an error in leaving out a script on one of the nodes that would stop Jolee from saying "You aren't going to ask about it?" even if you had actually asked about it, which has been fixed. Compatibility: The K1 Community Patch edits the Upper Shadowlands OnEnter script. Those changes are also incorporated into this mod. If you are using a mod that forcibly overwrites MOD files (like NPC Overhaul), make sure you install that mod first. This mod will patch a pre-existing kas_m24aa.mod in the Modules folder. Not compatible with any other mod that replaces the same level model (m24aa_09a). Not compatible with any other mod that puts kas24_force_01.dlg in the Override folder (although such a case should be fixable with a compatibility patch). Known Issues: In order to get the forcefield to close and function properly again after a level transition, it was necessary to resort to a hack function Bioware implemented for (presumably) the same issue they had with doors on the Yavin space station. In testing this has worked perfectly fine, however, the specifics of the hack are undocumented, so there may be edge cases I haven't encountered. If anyone experiences any issues with it, let me know. As you can see in the video, there's a subtitle error for one of Jolee's lines. Fixing it is better left to dedicated dialog.tlk overhaul. The mod doesn't touch the Lower Shadowlands module, so there's no active field or control panel on that side. Perhaps that could be an optional extra added in a future update. Acknowledgements: Thanks to @A Future Pilot for permission to distribute a modified version of K1CP's k_pkas24aa_enter.ncs Thanks to @JCarter426 for various scripting advice and troubleshooting, past and present Thanks to @LiliArch for correctly guessing that it wasn't just Bioware being lazy, which lead me to find Bioware's hack Thanks to @bead-v for MDLEdit and KOTORMax Thanks to @ndix UR for TGA2TPC The control panel textures include a mishmash of various textures from The Old Republic MMO The robes worn in the screenshots/video are from @JCarter426's Fashion Line I: Cloaked Jedi Robes for K1 Thanks to @ebmar for pointing out the lack of TSLPatcher.exe in the initial release

There are so-called "lite" alien models that are of lesser quality than most other models in the game. These include the Quarren and Gran species. Both aliens feature more prominently in the sequel and their models were given an overhaul. This mod ports the K2 versions of the models back to K1, improving the quality of models and creating a more consistent aesthetic.

This mod adds a new fat commoner male model, ported from The Old Republic MMO. It replaces the generic appearance used by Handon Guld on Dantooine, who, judging by the dialogue he is involved with, was originally intended to be an overweight character. Additionally, there are several other changes that have been made to the Calder Nettic murder investigation sequence: Handon now sports an injured idle animation to conform to dialogue mentioning he is holding his injured side Two erroneous fades to black in penultimate dialogue lines have been removed When the player solely accuses either Handon or Rickard, the other will now run off after being given permission to leave rather than standing around Master Bolook has had his appearance changed to a green Twi’lek to match one of Rickard’s lines of dialogue referring to him as a “green-skinned nerfherder” (apparently he was green in the original Xbox version, but was changed to orange for the PC version) N.B. - You will need to load a save prior to entering the Dantooine Grove for the first time in order for this mod to take full effect. Acknowledgements: This mod was inspired by Merkuri22's episode of her "KOTOR 1 Experience" series dealing with this quest Very special thanks to @JCarter426 for writing the custom scripts and doing lots of troubleshooting to get them working correctly Thanks to @bead-v for KOTORMax and MDLEdit Thanks to @ndix UR for TGA2TPC and normal map normalizer tool Original models and textures ported from The Old Republic MMO Thanks to zaramot on the Xentax forums for the TOR GR2 Max import script

*********************************** Knights of the Old Republic *********************************** TITLE: A Crashed Republic Cruiser on a Nameless World (1.1) AUTHOR: LDR FILENAME: ldr_repshipunknownworld FILESIZE: 176 MB -------------------------- INSTALLATION INSTRUCTIONS -------------------------- There are 2 available methods of installing A Crashed Republic Cruiser on a Nameless World. The standard installation method is done entirely though TSL Patcher, and doesn’t require you to do anything beyond simple button clicking. The manual installation is for those unable, for whatever reason, to use TSL Patcher, and involves the copying and pasting of files from folder to folder. NOTE: With the standard installation method, this mod is far more likely to work alongside any other mods you may currently have installed, which may not be the case should you use the manual installation method. I have attempted naming files in a way where there should be a minimum chance of mod conflicts, but you never know. This mod also has an "Optional" installation meant to use in conjuction with either/both of SithSpecter's High Quality Blasters and Colored Loadscreens mods. To uninstall, remove the files from their respective folders in the SWKotOR directory. ------------------------------ » STANDARD INSTALLATION ------------------------------ 1) Double click TSLPatcher.exe. 2) Click the "Install Mod" button and select your SWKotOR game directory. 3) Sit back, relax, and wait for the installation to complete. ------------------------------ » MANUAL INSTALLATION ------------------------------ 1) Open up the tslpatchdata folder. 2) Copy all files with a .wav extension and paste into the streamwaves folder located in your SWKotOR directory. 3) Copy all files with a .mod extension and paste into the modules folder located in your SWKotOR directory. 4) Copy everything else (With exception to changes.ini and info.rtf) and paste into the override folder located in your SWKotOR directory (If there isn't one, create one). ------------------------------ » OPTIONAL INSTALLATION ------------------------------ 1) Additional install options have been provided for additions to SithSpecter's High Quality Blasters and Colored Loadscreens mods. 2) Double click TSLPatcher.exe. 3) Click the "Install Mod" button and select your SWKotOR game directory. 4) Sit back, relax, and wait for the installation to complete. --------------- Mod Permissions --------------- You may not use any assets of this mod in your own mod without first contacting me. ------------ DESCRIPTION ------------ This mod adds 6 new modules, 9 new items (3 equippable inventory, 4 datapads, 2 keycards) on the Unknown World, making the crashed Hammerhead explorable. You must have a save before setting foot on the Unknown World. -------------------------------------------------- » Version 1.1 Changes -------------------------------------------------- - Fixes a bug where the party was prevented from spawning in during the confrontation on the beach on a DS playthrough following completing the Temple. - Corrects reported spelling/gramatical errors. - Integrates optional install paths through TSLPatcher for additions to SithSpecter's High Quality Blasters and Colored Loadscreens mods. ----- BUGS ----- Any mods that modify the unk_m41aa OnEnter script will be incompatible with this mod. "Frame Buffer Effects" turned off in the swkotor.ini results in audio logs without the blue camera effect. If you find any please post them in the comments or send me a direct message. I will address them as soon as I can. ------------------- » MODULE/ITEM NAMES ------------------- For this to work correctly in conjunction with your own mod, you must not use any within the following list as names for your custom module/item reskins. m41ae m41af 152unk 153unk m41ai m41aj LHC LHW Blaster Pistol template 020 Forearm Band template 019 Gauntlet template 019 ------------- Voice Acting ------------- DarthTyren as Medical Officer Audio Log Mellowtron11 as Engine Officer Audio Log Sith Holocron as Republic Captain Audio Log Zhaboka as Kolgrim ----------- Permissions ----------- Permission granted from Darth InSidious to use his alternative beach Hammerhead textures. Permission granted from DarthParametric to utilize his edited mdls from both his Endar Spire and Harbinger Hull Repair mods. Permission granted from SithSpecter to utilize integration for his High Quality Blasters for Modders resource and colored loadscreen templates mod. Permission granted from Thor110 to repurpose his ported K1 Harbinger modules. ------- Credits ------- - To the people who created the tools which have allowed me to create this mod. - Kotor Tool..........................Fred Tetra - K-GFF GFF Editor/DLGEditor..........tk102 - ERF Editor/TSLPatcher...............stoffe - MDLOps..............................cchargin/JDNoa - Lipsynch Editor.....................JDNoa - XVI32 Hex Editor....................Chmaas - CSLU Toolkit........................Oregon Health & Science University My beta testers: djh269, jc2, N-DReW25 and Zhaboka. I couldn't have done this without you! JCarter46 and DarthParametric for handholding me with regards to literally all scripting that was above basic level. Thank you so much. Lachjames for his assistance in helping me generate/test .lip files. Snigaroo for bug reporting and feedback for the 1.1 patch. All of the wonderful folks at DeadlyStream (and Holowan Labs), that led me on and helped me when I hit a snag. All of you who downloaded this mod! Thank You!

This mod edits the models for the the female Class 7 (PFBF) and Class 9 (PFBH) armours. Along with Class 8 (PFBG), these three armours all feature a fabric collar. However, in the case of the F and H models this collar lacks any weighting to the neck bone, and due to its shape and height is prone to experiencing clipping of the neck with some head models. As the G armour apparently doesn't appear to suffer these issues, the collar from this armour (with some adjustment) was grafted onto the F/H bodies. The amount of clipping is somewhat variable depending on the head. It also seems far more prevalent on the small body size, but I have provided fixed models for all three body sizes. Compatibility: The UVs of the armours are unchanged, so they are still fully compatible with all vanilla textures and any retexture mods that stick to that layout Obviously the mod will not be compatible with any other mod that replaces the same models Permissions: This is intended as a half enduser mod, half modder's resource. People are free to include this content as part of other mods as long as credit is given. Acknowledgements: Thanks to @ebmar for making me aware of the issue via a screenshot for his Janice Nall mod Thanks to @bead-v for MDLEdit and KOTORMax

A simple armband utility mod that I made for my own use when testing K1CP, because I was constantly annoyed at party members lagging behind and preventing me from transitioning to the next module. When activated it jumps the other two party members to the current party leader (i.e. whoever is using the armband). I figured other people might have a use for it as well. Installation: Run INSTALL.exe to install the mod. Add dp_ptyhrd_arm to your inventory via console or KSE. Equip to one of your armband inventory slots and activate by selecting it in the utility item slot in the UI (as you would a shield or adrenal). Credits: Icon taken from The Old Republic (and sloppily upscaled).

Textures for HD KT400 military droid carrier and Lethisk-class armed freighter in high resolution.

This is a companion to my TSL Main Menu Model Fix for Widescreen mod. In a similar manner, it adjusts the model file for K1's main menu so that it properly fills the full screen width of widescreen aspect ratios (i.e. 16:9, 16:10). It is designed to be used in conjunction with ndix UR’s KotOR High Resolution Menus mod (as pictured). Because the original vanilla background texture is very low resolution, it looks pretty terrible when scaled up to fullscreen at 1080 (or above). I created a new, higher resolution background texture that approximates the same look. As of v1.1, an optional replacement logo is provided. This is a TOR-style version of the logo, created by GOG. Two versions are provided, one of which is offset in order to better align using the current version of ndix UR's GUI mod. A centered version is also provided in the even that the GUI mod is updated. Note that I have only tested this at 1080. I have no idea how the image may be positioned at different resolutions. Obviously this mod will not be compatible with any other mod that also alters/replaces the menu model. As mentioned, it is intended to be used with ndix UR’s UI mod, and serves no real purpose without that mod. N.B.: This is NOT a widescreen mod! This is just an addition for when you are already using a widescreen mod like UniWS. Installation Instructions Extract the archive, copy the MDL, MDX, and TGA files, and paste them into your Override folder. If you also wish to use the upscaled vanilla logo or the TOR-style logo, copy the appropriate version to your Override folder as well. Acknowledgements Thanks to @bead-v for MDLEdit and KOTORMax that made editing and compiling the menu model possible. Thanks to @ndix UR for testing the mod and various discussions pertaining to its development, as well as all the behind-the-scenes work in getting the new mod tools off the ground. Thanks to @JCarter426 for helping out with filtering via waifu2x to clean up some of the aliasing

Description Warning: advanced player only! This mod is designed to enhance certain encounter with the most famous bounty hunter. You must go to Tatooine first to experience a quick and gruesome death. Learn more in readme.txt. Disclaimer: I have personally tested the scenario without cheat/KSE editing. It is totally survivable, but you really need to know what you're doing. Installation Drop everything from the override folder to the game override folder, can't be simpler! Uninstallation Just remove the files. Permission Do not claim credit for this mod and do not use assets from this mod without my permission Special Thanks @DarthParametric for helping me out with DeNCS, otherwise this mod will have some serious defect Fred Tetra for Kotor Tool JDNoa for DeNCS Legal THIS MODIFICATION IS NOT SUPPORTED BY BIOWARE/OBSIDIAN ENTERTAINMENT, LUCASARTS, DISNEY OR ANY LICENSERS/SPONSORS OF THE MENTIONED COMPANIES. USE OF THIS FILE IS AT YOUR OWN RISK AND THE ABOVE MENTIONED COMPANIES OR THE AUTHOR IS NOT RESPONSIBLE FOR ANY DAMAGE CAUSED TO YOUR COMPUTER FOR THE USAGE OF THIS FILE.

Infinite Energy shields A Mod for Star Wars Knights of The Old Republic 2 Author: N-DReW25 Release Date: 9.11.2017 1.1 Release Date: 25.11.2017 Installation: Simply Copy and Paste or Drag and Drop ALL the files within the "For Override" into your Star Wars Knights of The Old Republic 2 override folder Uninstallation: Remove or Delete the files from your Star Wars Knights of The Old Republic 2 override folder Description: During the course of the game, you will obtain various energy shields. These shields (Results may vary depending on which) are designed to block out certain damage whether its fire, electricity, energy etc. This may not sound like much but energy shields can mean the world when you're facing a certain boss. Though the way they're balanced is that after every 5 turns they burn out and can't be used meaning you will require getting a brand new one. This mod removes that, now whenever you use energy shields you can use it as many times as you like without any fear of it burning out. The following items have been affected: Energy shields Arkanian Energy shields Mandalorian Melee shields Mandalorian Power shields Echani shields Echani Dueling shields Peragus Mining Shield Verpine Prototype shields All droid shields (If I miss any please let me know) Known Bugs: None but if there is Just PM me on Deadlystream. Incompatibilities: Will be incompatible with things that edits a_shield_01.uti a_shield_02.uti a_shield_03.uti a_shield_04.uti a_shield_05.uti a_shield_06.uti a_shield_07.uti Upcoming: Droid Item's like Flamethrowers Permissions: You are NOT allowed to claim this work to be your own Thanks: JDub96 for reminding me to make this mod Bioware for such an amazing game Fred Tetra for Kotor Tool and everyone who downloads the mod. Legal: THIS MODIFICATION IS NOT SUPPORTED BY BIOWARE/OBSIDIAN ENTERTAINMENT, LUCASARTS, DISNEY OR ANY LICENSERS/SPONSORS OF THE MENTIONED COMPANIES. USE OF THIS FILE IS AT YOUR OWN RISK AND THE ABOVE MENTIONED COMPANIES OR THE AUTHOR IS NOT RESPONSIBLE FOR ANY DAMAGE CAUSED TO YOUR COMPUTER FOR THE USAGE OF THIS FILE.

############################ # DESCRIPTION ############################ The "No Speed Blur" Kotor1 mod disable the motion blur when speed force power is enabled without disabling all frame buffer effets. ############################ # REQUIREMENTS ############################ - Kotor1 installed (Retail/Gog/Steam version) ############################ # COMPATIBILITY ############################ - Compatible with all mods in principle ############################ # HOW TO INSTALL ############################ Recommended Method : TSLPatcher Method. Go to the TSLPatcher/ folder and execute "TSLPatcher.exe". This method will only modify a line in the file "visualeffects.2da", preserving compatibility with other mods that already have modified the same file. Alternative Method : Override Method. Copy the content of the override folder in the override/ folder of Kotor1. Feel free to leave a comment/question/request bellow. Cheers, aazlm THIS MODIFICATION IS NOT MADE, DISTRIBUTED, OR SUPPORTED BY BIOWARE, OBSIDIAN, OR LUCASARTS ENTERTAINMENT COMPANY LLC. ELEMENTS TM & © LUCASARTS ENTERTAINMENT COMPANY LLC AND/OR ITS LICENSORS.

I confess. I really like how the character Malak. And I fell in love with it after reading the comic book Star Wars: Knights of the Old Republic. Especially touched when he sacrifices himself for the unfamiliar girl. Malak revealed as heroic, romantic, good-looking young man. We all know what happened to him and made the dark side of the sword Revan. And then Malak lost any hint of attraction. It is not right! I made an alternative texture for the dark lord. I have long thought, how to give it a more attractive appearance. And I'm very happy with what we got. For me it looks manly and attractive, even with the injury suffered.