Leaderboard

WARNING: This Skin is intended to be used with another mod! Read the Installation section to follow instructions. The Mod intended is N-Drew's "Build a Calo" Mod. It can be found on DeadlyStream Description: With the release of N-Drew's "Build a Calo" mod, it would be fitting for someone to make a skin that describes a "damaged" Calo Nord. That's what I've done. I've given Calo some not too major burns on his face, and made his pants dusty and his jacket burned as well. With the addition of giving a "damaged" reskin, I've also upscaled the textures by 4x. Installation: Install N-Drew's mod first: https://deadlystream.com/files/file/2444-build-a-calo/ Follow the instructions given in the mods description! Afterwards, Copy all the files in the "Override" folder after extracting the .zip this mod is in to the Override folder in your Kotor game directory. Overwrite when/if prompted. IF USING N-DREW'S MOD: Make sure when you install N-Drew's mod, you install it with both Head and Body modifications. If NOT USING N-DREW'S MOD AND WISH TO USE THESE TEXTURES AS NORMAL: Change the "02" in each of the files name to "01" UnInstalling: Delete the files included with this mod, and replace with the files from n-drew's or another modders texture. Compatability: Compatible with everything but other mods that make the same changes as these mods. Listed as Not Compatible with K1R, because of it's intended use with a non compatible mod. Credits: GIMP JC and DarthParametric in DeadlyStream discord for giving advice on the stuff used in the .txi Bioware for making Kotor. N-Drew for making "Build A Calo", which makes the intention of this reskin possible. Permissions: Do Not include this in your own mod without my permission. Do not claim it as your own. Do not reupload to any other sites without my permission. Known Issues: Possible there may be some rendering issues due to the .txi's included with the mod, if so, remove from override. Legal: THIS MODIFICATION IS PROVIDED AS-IS AND IS NOT SUPPORTED BY BIOWARE/OBSIDIAN ENTERTAINMENT, LUCASARTS, DISNEY OR ANY LICENSERS/SPONSORS OF THE MENTIONED COMPANIES. USE OF THIS FILE IS AT YOUR OWN RISK AND THE ABOVE-MENTIONED COMPANIES OR THE AUTHOR IS NOT RESPONSIBLE FOR ANY DAMAGE CAUSED TO YOUR COMPUTER FOR THE USAGE OF THIS FILE

A Mod for Star Wars Knights of The Old Republic Author: N-DReW25 1.0.0 Release Date: 22.03.2024 Pre-Installation: Please install the K1 Community Patch FIRST before this mod! If you plan on using any of JCarter426's Cloaked Jedi Robe mods, please ensure that his mods are installed before Build a Calo. This mod is divided into two versions, the "Normal Versions" which uses the vanilla Calo Nord model and the "JC's Cloaked Robe Compatible version" which uses JC's Calo Nord hotfix model. If you plan on using the Cloaked Robes, install that mod before Build a Calo and use the "JC's Cloaked Robe Compatible version" of this mod, if you don't plan on using those mods then please use the "normal version" instead. Installation: Simply click on the INSTALL.exe and you'll be given two install options. "Calo Nord Head & Body" will allow you to modify Calo Nord's head & body post-Taris. "Calo Nord Body Only" will only allow you to modify Calo Nord's body post-Taris. This means the head texture you use on Taris will also appear post-Taris. Calo Nord's post-Taris appearance will now use the skin "N_CaloNord02.tga" in the Override and "N_CaloNordH02.tga" if you used "Calo Nord Head & Body". Once you've selected your desired option, click install then sit back and watch the TSLPatcher do its magic. If you do nothing after installing this mod, Calo Nord will use SpaceAlex's brown outfit post-Taris from the K1EP. You can install the "N_CaloNord02.tga" texture from the Optional Black Outfit folder to make Calo Nord's post-Taris outfit use Watcher07's black outfit (the same one recommended on the Kotor Mod Build website). You can download other Calo Nord textures & rename them to make them work with Build a Calo. For example, if you download "Quanon's Calo Nord Skin" you can install the "GameLook" option first and this will replace Calo's appearance on Taris. If you open "QSLook" and rename the following files, placing these renamed files in the Override will instead replace Calo's appearance post-Taris: N_CaloNord01.tga -------> N_CaloNord02.tga N_CaloNord01.txi -------> N_CaloNord02.txi N_CaloNordH01.tga -------> N_CaloNordH02.tga N_CaloNordH01.txi -------> N_CaloNordH02.txi This feature is intended to be customizable, instead of using Quanon's "GameLook" for Taris and "QSLook" post-Taris you can have it be reversed, or you could have Emperor Turnip's HD Calo Nord textures. Just remember to have the Taris skins set to 01 with the post-Taris skins set to 02 as shown above. And remember, N_CaloNordH02.tga will ONLY work with the "Calo Nord Head & Body" installation option. Description: Calo Nord is a bounty hunter in Kotor who is iconic for his colorful attire. Throughout the years, mods have sprung up which alter Calo Nord's appearance by changing the overall color scheme of his outfit or by changing his entire style, in the early to late 2000s these modded skins used the default 512x512 resolution whilst newer mods made in the late 2010s & beyond use higher texture resolutions to add more detail to the skins. 2024 is the year which saw the release of N-DReW25's take on the character with his "Build a Calo" mod. Breaking with the tradition of crafting a new skin to add to the collection of other Calo Nord skins which have come & gone, I've instead chosen to craft an elaborate little mod which uses other people's Calo Nord reskins in a way never before seen. The way "Build a Calo" works is that Calo Nord will appear on Taris with one set appearance, whilst after Taris he's wearing a different outfit. If you install this mod & boot up the game, Calo will wear his blue outfit on Taris whilst after Taris he'll wear a new brown outfit from the defunct K1 Enhancement Pack. If you choose to install the "Optional Black Outfit" AFTER installing Build a Calo, you'll have Calo use Watcher07's reskin (the same one from Snigaroo's Kotor Mod Build) after Taris. Now, if you look at the screenshots on the Build a Calo mod page, you'll see that it's possible to install "Quanon's Calo Nord Skin" found on Deadlystream with the "Gamelook" version appearing on Taris whilst the "QsLook" version appearing after Taris. Before Build a Calo, you'd have to pick either "Gamelook" or "QsLook"... it was one or the other, but with Build a Calo you can now have both. With this mod, you "Build" Calo Nord to your liking. Do you want to use both of Quanon's Calo Nord skins at once? Would you rather swap Quanon's Calo Nord skins so "QsLook" appears on Taris whilst "Gamelook" appears after Taris? Do you want to use Watcher07's black reskin on Taris whilst Calo uses the brown K1EP reskin after Taris? Will you install the "Calo Nord Head & Body" version of Build a Calo and use Quanon's skins to change both Calo's outfit & head? Or will you customise Calo Nord even further? Would you rather install "Calo Nord Body Only" version of Build a Calo & use Quanon's "Gamelook" version of Calo Nord's head on both Taris & after whilst his body uses Emperor Turnip's HD Calo Nord outfit texture on Taris and Quanon's "QsLook" texture after Taris? Or will new mods be published after Build a Calo? Maybe some new HD texutres for Calo Nord in the future may also be used alongside Build a Calo, maybe someone could make a "battle damaged" version of Calo Nord which can be used with this mod for his appearance after Taris. The possibilities are endless! Known Bugs: If there are bugs feel free to report them to me on Deadlystream. Incompatibilities: Incompatible with any mods that change Calo Nord's model & character files post-Taris. Please report any incompatibilities! Permissions: Do NOT claim credit for this mod and do not use assets from this mod without my permission. You are more then welcome to talor your Calo Nord reskins to be used alongside Build a Calo if you wish. Thanks to: SpaceAlex: For releasing his K1 Enhancement Project as a modder's resource & for making the Calo Nord reskin included in said mod! Watcher07: For making the Calo Nord Recolor mod! Quanon: Whilst I did not use your skin in my mod, your Calo Nord reskins inspired me to make this mod in the first place! JCarter426: For creating the Cloaked Robes mod & the hotfix for Calo Nord to make his character model work with the new supermodels of that mod. His hotfix for Calo Nord was included in Build a Calo for the sake of compatibility between our mods! Bioware: For such an amazing game! Fred Tetra: For Kotor Tool! Stoffee: For TSLPatcher! Everyone who downloads the mod! Legal: THIS MODIFICATION IS NOT SUPPORTED BY BIOWARE/OBSIDIAN ENTERTAINMENT, LUCASARTS, DISNEY OR ANY LICENSERS/SPONSORS OF THE MENTIONED COMPANIES. USE OF THIS FILE IS AT YOUR OWN RISK AND THE ABOVE-MENTIONED COMPANIES OR THE AUTHOR IS NOT RESPONSIBLE FOR ANY DAMAGE CAUSED TO YOUR COMPUTER FOR THE USAGE OF THIS FILE.

Causes the Repair skill to modify damage inflicted by Stun/Disable/Destroy Droid. SUMMARY Knowing how to fix something usually means you know how to break it too. This mod makes it so the damage dealt by Stun Droid and higher tier powers depends on the Force user’s Repair skill. Users with high Repair may deal significantly more damage than vanilla, while damage dealt by users with cross-class Repair will be limited. A way to make your tech enthusiast Jedi stand out in combat. DETAILS In vanilla, Stun/Disable/Destory Droid inflict damage equal/proportional to your character level. This mod changes the flat damage value to incorporate the Repair skill: damage = (level + 1.5*Repair)/2 With a Repair of 0, you deal half the vanilla damage. With a Repair equal to your character level, you inflict 25% more damage than vanilla. At double your level, you deal double damage. INSTALLATION To install, run TSLPatcher.exe. If spells.2da already exists in your override folder, an unaltered copy will be placed in the “backup” folder in the location of TSLPatcher.exe, along with a backup of dialog.tlk. UNINSTALLATION To uninstall, remove k_fp_stundr1rep.ncs, k_fp_stundr2rep.ncs, k_fp_stundr3rep.ncs, and spells.2da from your override folder. Replace dialog.tlk in the main game folder with the unaltered dialog.tlk in the backup folder. If a spells.2da was created inside the backup folder, move it to override. COMPATIBILITY Should be compatible with any mod that doesn’t affect the scripts for Stun Droid, Disable Droid, or Destroy Droid. As long as it’s installed after, this mod will override changes to those powers’ scripts only. PERMISSIONS Please do not reupload this mod. CREDITS offthegridmorty KOTOR Tool - Fred Tetra TSLPatcher, TalkEd - stoffe, Fair Strides Screenshot uses Pramod Marlon's AI upscaled icons.

This mod will replace and update PLC_Desk1 texture files. To Install 1. Download: PLC_Desk 2. Copy all files to the Knights of the Old republic's Override folder. (Example location - C:\Program Files (x86)\Steam\steamapps\common\swkotor\Override) 3. When/if prompted to overwrite files, press okay. 4. If you like the mod; leave a comment or endorse! (It would be much appreciated) Made with love

This mod changes the number of troops that spawn on the Star Forge. More specifically in Deck 2 and the Command Center. Options range from Half to x10. Star Forge Horde Half - For people who are playing the game for the first time. Star Forge Horde x2 - Jedi Knight difficulty. Star Forge Horde x3 - Jedi Master difficulty. Star Forge Horde x4 - Jedi Grand Master difficulty. Star Forge Horde x5 - Chosen One difficulty. Star Forge Horde x10 - You are insane.

Gives Bastila a unique Force power based on the Battle Meditation power from TSL. *NOTE: This mod will only work properly on saves from before Bastila has joined your party.* DETAILS This mod essentially ports the "Improved Battle Meditation" Force power from KOTOR II and gives it to Bastila as a starting power instead of Force Aura. Like in TSL, the power adds +2 to attack rolls, damage, and will saves for all party members and -2 for enemies within a 10m radius for 20 seconds at a cost of 35 FP. It also increases vitality regeneration for the duration. The power is not selectable at level-up by the PC or party members and is only added as one of Bastille’s starting powers. The VFX and Force power icon are ported from TSL. In KOTOR II, Improved Battle Meditation is a level 12 power while this mod gives it to Bastila at level 3, so it's possible there's an effect on balance in the early game. I don't think it's too OP of a power but let me know if you have feedback. INSTALLATION To install, run TSLPatcher.exe. This is required. Don't try to copy the files over manually. NOTE: If you install on a save from after Bastila has already joined your party, she won't have the power and won’t be able to select it on level-up. You can use save editor to give her the power. If any files are modified, a backup folder of unmodified files will be created inside the mod folder. UNINSTALLATION To uninstall, remove spells.2da, visualeffects.2da, effecticon.2da, p_bastila.utc, fp_bmed.ncs, v_bmedit2_imp.mdl, v_bmedit2_imp.mdx, v_bmedit2r_imp.mdl , v_bmedit2r_imp.mdx, and ip_battlemed02.tga from the override folder. Replace unk_m44ac.mod in the modules folder with the version in the backup folder. Replace dialog.tlk in the main game folder with the version in the backup folder. Then move any remaining files in the backup folder to override. COMPATIBILITY Should be compatible with most other mods as long as they use TSLPatcher or you install this mod afterward. Could potentially conflict with other mods that edit Bastila's starting Force powers. PERMISSIONS Please don’t reupload without my permission. CREDITS offthegridmorty djh269 - endgame Bastila support, icon upscale & other tweaks - thanks! KOTOR Tool - Fred Tetra TSLPatcher, TalkEd - stoffe, Fair Strides This mod contains assets from SW: KOTOR II TSL

The K1 Community Patch (K1CP) is a compilation of previous bugfix mods and a multitude of new original fixes put together with the intention of resolving the many and various issues that KOTOR has. This includes some well-known game breaking bugs/softlocks, broken quests, inaccessible content, as well as lesser issues such as problems in conversations, visual inconsistencies, player annoyances, etc. The intention is for the changes to be as seamless as possible, fixing and improving things whilst still retaining the original developer intent. A huge thanks to all of the mod authors who created these mods, and allowed them to be included in this patch! Unfortunately, the individual list of changes has grown far too long to be included in this post. However, you can view a detailed breakdown of each author's individual contributions in the included readme file and a summary of the changes the current version has made since the previous release in the changelog file. List of Contributing Authors (alphabetical): A Future Pilot blennus danil-ch darthbdaman DarthParametric Ebmar Frykas Gimmick5000 jc2 JCarter426 Kainzorus Prime Kexikus KOTOR 1 Restoration Team Leilukin Markus Ramikin N-DReW25 ndix UR R2-X2 Red Hessian Salk th3w1zard1 Thrak Farelle WildKarrde Installation: Run INSTALL.exe and navigate to your K1 install folder. Generally speaking, this mod should be installed before anything else, except mods that do hard edits/overwrites of 2DA, TLK or MOD (module) files. Warning: Never run the installer from inside the archive! Always extract the archive onto your hard drive first. N.B.: With the advent of version 1.10.0, K1CP has migrated away from the use of TSLPatcher and switched to HoloPatcher. This allows for additional patching functionality and resolves some bugs encountered with TSLPatcher. HoloPatcher is also multi-platform. The bundled installer is the Windows version, but Mac and Linux users can download the appropriate installer for their system here. It is highly recommended that you do not install the game on your system's C drive, especially in Program Files. Windows can have permissions issues when trying to install the mod to a C drive destination. If you are using the Steam version of the game and have installed Steam in its default Program Files location, we advise creating a new Steam Library on a different drive and moving the game there via the game's Properties pop-up in Steam. Translation: The mod now has translations in French and Russian, available as separate patches. To use, first download the base K1CP v1.10.0 archive and extract it to your harddrive. Download your translation patch of choice and extract its contents into K1CP's tslpatchdata folder. Proceed to install the mod as normal. Traduction (Français - Harlockin): Le mod a maintenant des traductions en français et en russe, disponibles sous forme de patchs séparés. Pour l'utiliser, téléchargez d'abord l'archive de base de K1CP v1.10.0 et extrayez-la sur votre disque dur. Téléchargez le patch de traduction de votre choix et extrayez son contenu dans le dossier tslpatchdata de K1CP. Procédez à l'installation du mod comme d'habitude. Переводы (Русский - olegkuz1997): Мод теперь включает в себя переводы на французский и русский языки, доступные в виде отдельных патчей. Для использования сперва скачайте базовый архив K1CP v1.10.0 и распакуйте его на жесткий диск. Скачайте нужный вам патч с переводом и извлеките его содержимое с заменой в папку tslpatchdata K1CP. После чего приступите к установке мода как обычно. Compatibility/Known Issues: K1CP uses module injection in an attempt to remain as compatible as possible with other mods. This may result in issues with mods that simply put files in the Override folder. It is recommended that you consult the individual authors of any large scale mods, particularly those that edit DLGs and scripts, as to whether their work is compatible with K1CP. Some mods will likely require updates, some may need to be installed in a specific order, whilst others may be fundamentally incompatible. K1CP currently only supports the English language version of the game, and makes a number of edits to the TLK file in English. If anyone is able to provide translations of these changes to other languages, please let us know. The KOTOR 1 Restoration (K1R) mod is incompatible with K1CP, however there is ongoing work to re-create the K1R mod for K1CP: https://deadlystream.com/files/file/2345-restored-content-for-k1cp-demo/ These are the currently known bugs/issues with KOTOR or the mod that the K1CP is looking to resolve: https://github.com/KOTORCommunityPatches/K1_Community_Patch/issues If you find any others, especially with changes/additions K1CP makes, please report them on the Github issue page or here on Deadly Stream so they can be addressed. Be sure to include as much information as possible, including a list of all the other mods you have installed, the order you installed them in, steps to reproduce the problem, along with screenshots and save files, if appropriate. You may also be directed to provide the install log file, a list of the contents of your Override folder, and specific MOD files from your modules folder. Uninstallation: Given the complexity of this mod, a clean install of KOTOR is the recommended approach for uninstalling K1CP. However, HoloPatcher does provide uninstall Shell (Bash) and PowerShell scripts which will work as long as K1CP was the most recent mod installed. Permissions: Due to this mod being a compilation from many different authors, please do not distribute/rehost it. Acknowledgements: All of the mod authors who have helped make this patch a reality - thank you! - especially for agreeing to distribution outside of Deadly Stream Fred Tetra - For KOTOR Tool tk102 - For DLGEditor and K-GFF JdNoa/Dashus - For DeNCS stoffe - For TSLPatcher/ChangeEdit/TalkEd bead-v - For MDLEdit and KOTORMax ndix UR - For TGA2TPC, TPCView, and MDLOps v1.0+ seedhartha - For KOTORBlender fork for Blender 2.8+ Cortisol - For Holocron Toolset and HoloPatcher/PyKotor th3w1zard1 - For additional customisation and feature improvement of HoloPatcher Fair Strides - For various tools and updates to older tools DrMcCoy - For Xoreos Tools Snigaroo - For maintaining mod builds at https://kotor.neocities.org/modding/mod_builds/ danil-ch - For the original info.rtf template Many thanks to ebmar, Salk, and KnifeMaster for providing numerous bug reports and beta testing certain fixes THIS MODIFICATION IS PROVIDED AS-IS AND IS NOT SUPPORTED BY BIOWARE/OBSIDIAN ENTERTAINMENT, LUCASARTS, DISNEY OR ANY LICENSEES/SPONSORS OF THE MENTIONED COMPANIES. USE OF THIS MODIFICATION IS AT YOUR OWN RISK AND NEITHER THE ABOVE MENTIONED COMPANIES NOR THE AUTHORS ARE RESPONSIBLE FOR ANY DAMAGE CAUSED TO YOUR COMPUTER BY THE USAGE OF THIS MODIFICATION.

The cutscenes were upscaled using Topaz Gigapixel AI, and interpolated to 60fps using SVP Pro 4. Black bars are used to maintain the aspect ratio of the content while bringing the videos to 16:9 overall. TO INSTALL: Make a backup of your "Movies" folder, in your main game directory. Download the pack that matches the resolution you play at. (Available: 720p, 768p, 1080p, 1440p, 2160p) Extract/unzip the pack you downloaded. Replace everything in your Movies folder with the extracted files. Do not place them in your Override folder. From here, there are two options to get them to play properly: Use Universal Widescreen (UniWS) to patch your game to the desired resolution. Video tutorial. Using a HEX editor, change the a set of numbers in your game's executable. See below. If you're using the Steam version, you may need to get a replacement executable (which I can't provide here) to be able to open it with the HEX editor or UniWS. Other online guides may have a link to a suitable file. To edit your executable, follow one of these two guides (skipping the parts about upscaling the cutscenes): https://www.youtube.com/watch?v=bA5l6HVs4Y4&feature=youtu.be&t=548 https://deadlystream.com/topic/4631-how-to-force-kotor-i-iis-bik-movies-to-play-in-any-resolution/ You will need to change the first and last two values in this set in your exe: 80 02 00 00 75 15 81 3D D8 D1 78 00 E0 01 The new values you should use, per resolution, are: 720p: 00 05 00 00 75 15 81 3D D8 D1 78 00 D0 02 768p: 56 05 00 00 75 15 81 3D D8 D1 78 00 00 03 1080p: 80 07 00 00 75 15 81 3D D8 D1 78 00 38 04 1440p: 00 0A 00 00 75 15 81 3D D8 D1 78 00 A0 05 2160p: 00 0F 00 00 75 15 81 3D D8 D1 78 00 70 08

NPC Diversity Pack [K1] A Mod for Star Wars Knights of The Old Republic Author: N-DReW25 0.8.0 Beta Release Date: 04.04.2024 Installation: Please install the K1 Community Patch FIRST before this mod! If you plan on using it, install the Unofficial K1CP Tweak Pack mod SECOND (This mod is optional and is NOT required for this mod to work)! Simply click on this mod's TSLPatcher.exe and click install. Do know that this mod edits over 600 NPCs so feel free to get a snack as the mod installs Description: As with many modders, I have a vision for a comprehensive NPC Overhaul. This mod is currently in a BETA stage, whilst I don't expect bugs, I do expect player criticism/feedback alongside reports of possible mod conflicts with certain mods... updates will be released to fix any possible bugs, add popular player suggestions, possible hotfixes for incompatible mods and new content as they become possible. What does this mod do? This mod is comprised of several smaller mods that have been merged into one big mod, resulting in an immersive NPC Overhaul which is compatible with the K1 Community Patch. This mod swaps the heads of hundreds of NPCs to prevent the 'clone' effect, it replaces the low poly Lite NPCs with actual NPC appearances, it diversifies the clothing, armor and weapons worn by NPCs without touching any of the NPC Loot drops, it modifies the .GIT files in some areas to remove duplicated NPCs, it swaps the soundsets of over 200 NPCs so that the enemies you fight have a truly random "death grunt" sound as they die and MORE! With this mod, over 600 NPCs will be affected (including NPCs which are commonly affected by other mods). It is HIGHLY advised to install this mod (AFTER the K1CP mod) BEFORE you install any new appearance mods. For example, Galaxy of Faces is a mod which adds new appearances. Installing the NPC-DP BEFORE that mod will allow you to have GoF appearances alongside the NPC-DP's NPC Overhaul. Known Bugs: This mod shouldn't have bugs, but if there are feel free to report it to me on Deadlystream. Incompatibilities: Please report any incompatibilities! Permissions: Do NOT claim credit for this mod and do not use assets from this mod without my permission. Thanks to: ebmar: For his attempt at fixing a problem with the TSLPatcher pre-0.4.1! JCarter426: For successfully pointing out the problem with the TSLPatcher pre-0.4.0, his help led to the 0.4.1 TSLPatcher fix! SpaceAlex: For fixing the old clothing bug in his K1 Enhancement Project for which his fix was carried over to this mod! DarthParametric: For pointing out some fatal flaws in the old TSLPatcher, his help led to the 0.8.0 TSLPatcher fix! Cortisol/th3w1zard1: For the HoloPatcher! Fred Tetra: For Kotor Tool! Stoffee: For TSLPatcher! Bioware: For such an amazing game! Everyone who downloads the mod! Legal: THIS MODIFICATION IS NOT SUPPORTED BY BIOWARE/OBSIDIAN ENTERTAINMENT, LUCASARTS, DISNEY OR ANY LICENSERS/SPONSORS OF THE MENTIONED COMPANIES. USE OF THIS FILE IS AT YOUR OWN RISK AND THE ABOVE-MENTIONED COMPANIES OR THE AUTHOR IS NOT RESPONSIBLE FOR ANY DAMAGE CAUSED TO YOUR COMPUTER FOR THE USAGE OF THIS FILE.

When HK-47 uses the power blast feat with 2 blaster pistols equipped only 1 shot is being fired, this mod fixes this issue, now 2 shots are being fired.

Galaxy of Faces [K1] A Mod for Star Wars Knights of The Old Republic Author: N-DReW25 1.1.0 Release Date: 17.03.2024 Installation: Please install the K1 Community Patch FIRST before this mod! This mod replaces the appearances of important named NPCs throughout the game. As such, if you wish to use mods like Onderon Fashion and Smuggler's Deluxe you'll have to install those mods BEFORE this mod. Simply click on the INSTALL.exe, select "Galaxy of Faces [Main]", click install then sit back and watch the TSLPatcher do its magic. The "Effix's Duelists", "Unique Rodians" & "Build a Bendak" are OPTIONAL. You don't have to install them if you don't want to. Effix's Duelists includes Effix's unique Gerlon, Ice & Marl heads. This installation is NOT a total copy of Effix's original Taris Arena Changes mod, that mod adds UTC files to the Override and patches those whilst Galaxy of Faces patches the UTCs in the .MOD files provided from the K1CP mod. If you are using the NPC Diversity Pack, install Effix's Duelists via Galaxy of Faces. If you want the Armors from Effix's Taris Arena Changes, install that mod instead. Unique Rodians gives various Rodian NPCs unique appearances. If you are using Stormie97's High Quality Alien: Rodians, do NOT install this option as a compatibiity patch for that mod hasn't been developed yet. Build a Bendak adds a unique appearance for Bendak Starkiller, however, the "N_Bendak.tga" texture is the vanilla Field Marshal texture. After installing this option, I encourage the player to replace this texture with a Mandalorian texture from a mod of your choosing, I personally recommend RedRob41's Bendak Starkiller Emblem Armour though do feel free to select a skin YOU want instead! Simply delete the "N_Bendak.tga" texture in your Override folder, rename your desired texture to either "N_Bendak.tga" or "N_Bendak.tgc" and place it in your Override. Description: From the good old days of late 70s/early 80s cinema, the expansive comics and novels of the 90s and 2000s, the rise of modern Star Wars video games and well into the Disney era, the Star Wars Galaxy has always been a "Galaxy of Faces". And I'm not just referring to the faces of the main characters. I'm referring to background characters such as the aliens of Chalmun's Spaceport Cantina in Episode 4 (many of whom were merely random alien costumes who have since evolved into staples of Star Wars alienography with timeless classics like Rodians, Aqualish and Devaronians amongst them), or the the Bounty Hunters hired by Darth Vader to track down the Millennium Falcon in Episode 5 (despite only having 4 lines of dialogue and just over 6 minutes of screen time, Boba Fett has since become just as popular as the main characters mostly down to his unique bad ass appearance in his limited screen time) or the background Jedi characters sprinkled throughout the prequel trilogy (despite never saying a word in the movies, the Jedi Plo-Koon, Kit Fisto and Aayla Secura have since become fan favorites)! Why do I say this? I think it goes without saying that unique appearances are what makes or breaks a character, and BioWare's 2003 Star Wars: Knights of the Old Republic RPG has a few problems with this. As with many video games from this period of gaming, KoTOR has a problem with NPC appearances. In Kotor, the generic background NPCs are referred to as "Commoners" both in the game files and in-game sometimes, the game has 24 generic NPC appearances including 2 white heads, 2 black heads and 2 asian heads for both adult and old appearances which are split between male and female types with an additional male and female white and asian "Tatooine" commoner variant that exists for some reason, bringing the total of commoner appearances up to 24. Throughout KoTOR, many of these generic appearances aren't even used for background NPCs, those background NPCs receive the low-resolution Lite appearances leaving the actual generic heads for named NPCs. NPCs like Holdan, Jon, Junix Nard, Matton Daisel, Firith Me and Kel Algwinn are all well written characters that really bring these environments to life... but sometimes these NPCs are forgettable simply due to the fact that they use the same appearances, the NPCs I named were strategically chosen as they both use the exact same 1st white and asian male commoner heads. This "clone" problem is intensified once you install NPC Overhaul style mods that remove the Lite appearances and replace them with generic commoner appearances as now you'll be seeing the same 24 heads across over a hundred NPCs throughout the game. This mod aims to fix that by giving many of these named NPCs unique heads to differentiate them from the generic heads. This mod aims to one day cover almost EVERY single named NPC in the game where possible through a combination of NPC appearances made by me, modder's resources and mods with the modder's permission. But do keep in mind, not ALL the modded unique heads will be added. Instead, if you consult the "Recommended Mods.txt" file you shall find a list of other mods that I personally recommend that shall also add new unique heads for NPCs that aren't part of this mod. Thus far, most of the unique heads of the K1 Enhancement Pack modder's resource have been added. To read about what appearances have been added thus far, please consult the "List.txt" file for a complete list of new appearances. Known Bugs: If there are bugs feel free to report them to me on Deadlystream. Incompatibilities: Incompatible with any mods that modify the appearances of Nico Senvi, Nemo, Matton Dasol, Kono Nolan, Jon, Jagi, Eli Gand, Dorak Quinn, Dak Vesser, Hidden Bek Lookout, Ahlan Matale, Shen Matale, Nurik Sandral, Rahasia Sandral, Gerlon, Ice, Marl, Twitch, Mika Dorin, Gluupor, Adum Larp or Bendak Starkiller. Incompatible with High Quality Aliens: Rodians, though a patch may be made in the future! Please report any incompatibilities! Permissions: Do NOT claim credit for this mod and do not use assets from this mod without my permission. Thanks to: SpaceAlex: For releasing his K1 Enhancement Project as a modder's resource. SilverEgde9: For textures used from the Brotherhood of Shadow: Solomon's Revenge mod. Effix: For the upscaled reskins of the Onderon commoner textures & textures from his Taris Arena Changes mod. DarthParametric: For fixing the Fat Commoner clothing models. Obsidian Entertainment: For the Flight Suit and Onderon commoner assets. Bioware: For such an amazing game! Fred Tetra: For Kotor Tool! Stoffee: For TSLPatcher! Everyone who downloads the mod! Legal: THIS MODIFICATION IS NOT SUPPORTED BY BIOWARE/OBSIDIAN ENTERTAINMENT, LUCASARTS, DISNEY OR ANY LICENSERS/SPONSORS OF THE MENTIONED COMPANIES. USE OF THIS FILE IS AT YOUR OWN RISK AND THE ABOVE-MENTIONED COMPANIES OR THE AUTHOR IS NOT RESPONSIBLE FOR ANY DAMAGE CAUSED TO YOUR COMPUTER FOR THE USAGE OF THIS FILE.

KOTOR features several conversations between party members which occur as you explore the various planets. Unfortunately, it is easy to miss some of them if you rarely use certain combinations of characters, such as Carth with Canderous or Bastila with Jolee. This mod moves these conversations to the Ebon Hawk and the Taris apartment hideout similar to KOTOR 2, guaranteeing that you can see nearly every conversation in a single playthrough. Conversations which directly refer to Taris are set to take place while you are still there, while the remaining conversations will occur in semi-random order up until (or possibly slightly after) the Leviathan sequence. Aside from the change in location, I have also made some slight edits to the conversations themselves, mainly relating to the timing of character animations. By default, conversations will also still occur on the various planets like in the vanilla game. They will only occur at the Ebon Hawk/hideout as required to catch you up on any that you may have missed. I have also provided an option to make the conversations happen only at the Ebon Hawk/hideout, never out on the planets. If you are using version 1.1 or earlier of this mod, a rare issue has been reported where the conversation in the Taris apartment after the swoop race does not play like it is supposed to. If this happens to you, I have provided a hotfix for download which may be used with existing installations. The separate hotfix is not required if you are installing version 1.2, which already includes the fix. Thank you for downloading, and I hope you enjoy this mod! ------------------------------------------------------------------- INSTALLATION Run INSTALL.exe and select either the standard version or the KOTOR 1 Community Patch compatible version. If you would like the conversations to take place only at the Ebon Hawk/hideout, run INSTALL.exe again and select "OPTION: Ebon Hawk/Hideout Only". If you have other mods installed, it is normal to see warnings that ebo_m12aa.mod and/or tar_m02af.mod already exist and have been skipped. ------------------------------------------------------------------- COMPATIBILITY This mod is compatible with the KOTOR 1 Community Patch (K1CP) and incorporates its fixes to k_pebn_pophawk.ncs. It has not been tested with the KOTOR 1 Restoration (K1R), but in theory it should be compatible. It is not compatible with any mods that edit k_pebn_pophawk.ncs or banter.dlg. For best results, install this mod after K1CP, K1R, or any other mods that make significant edits to the Ebon Hawk interior or to the Taris apartment hideout. ------------------------------------------------------------------- CREDITS NWNSSCOMP by Torlack and tk102 DeNCS by JdNoa and Dashus K-GFF by tk102 DLGEditor by tk102 TSL Patcher by stoffe and Fair Strides ERFEdit by stoffe and Fair Strides Kotor Tool by Fred Tetra This mod includes fixes to k_pebn_pophawk.nss which were developed by the K1CP team. This mod was inspired by the following mod request thread on Deadly Stream: https://deadlystream.com/topic/5684-party-member-conversations-in-apartment-and-ebon-hawk-k1/. Thanks to everyone who participated in the original thread for their discussion, which provided a major source of inspiration. ------------------------------------------------------------------- VERSION HISTORY 1.0 - Initial Release 1.1 - Revised installation process and options - Revised the walk scripts in the Mission/Bastila conversation so that they do not need to be compiled during installation - Adjusted the camera angles the Mission/Bastila conversation - Adjusted the conditions for determining when conversations play before and after the Leviathan sequence - Added an extended fade to hide the party fading out and reappearing when entering the Ebon Hawk or Taris apartment - Revised implementation of edits to tar02_bastvision.dlg to reduce incompatibilities with other mods that edit the same file (i.e. K1CP 1.10). - Cleaned up and clarified comments in the script source files 1.2 - Added additional conditions the Taris apartment entry script to prevent a rare issue where the vanilla conversation after "rescuing" Bastila did not occur. Thanks to PoopaPapaPalpatine for reporting the issue and testing the fix. ------------------------------------------------------------------- DISCLAIMER AND PERMISSIONS This modification is provided as-is and is not supported by Disney, Lucasarts, or Bioware. Use at your own risk. The author shall not be held responsible for damage to your game installation, computer, or saved games resulting from the use of this mod. This mod shall not be reposted, in whole or in part, on any sites other than Deadly Stream without the author's permission. Assets from this mod shall not be redistributed in other modifications without the author's permission.

Unlocks the camera during the Harbinger arrival animation, so you can have the eerie experience of walking alongside the huge ship as it pulls closer. I think it's more ominous this way (and as a bonus, if you're replaying and don't want to watch again, you can rush through without waiting for the whole animation.) Compatibility Tested with Vanilla KOTOR2, TSLRCM and the KOTOR2 Spoiler-Free Mod Build, but it should work with the Full Mod Build too. Install this after TSLRCM and anything else that modifies the Harbinger arrival sequence, such as the Harbinger Arrival Performance Enhancement (which is included in the mod build). Also compatible with my Harbinger Arrival: Restore Movie mod. Install them in either order. Links KOTOR2 Spoiler-Free Mod Build: https://www.nexusmods.com/kotor2/mods/1186 JoeNotCharles' Harbinger Arrival: Restore Movie: https://deadlystream.com/files/file/2448-harbinger-arrival-restore-movie

This mod will replace and update PLC_Sign texture files. To Install 1. Download: PLC_Sign 2. Copy all files to the Knights of the Old republic's Override folder. (Example location - C:\Program Files (x86)\Steam\steamapps\common\swkotor\Override) 3. When/if prompted to overwrite files, press okay. 4. If you like the mod; leave a comment or endorse! (It would be much appreciated) Made with love

By default not all Jekk'Jekk Tarr bar patrons have weapons, yet they attack you, an armed to the teeth Jedi, this makes no sense, so i added weapons to their inventory, they will pull them once the combat starts.

A Mod for Star Wars Knights of The Old Republic Author: N-DReW25 1.0.0 Release Date: 04.01.2023 Installation: Copy & Paste the files inside the "For Override" folder and place them into the "Override" folder inside your "swkotor" directory. Description: Since the 2010s, there have been many attempts at creating high quality models and textures for the weapons found in the Kotor games, however, there are several types of weapons which don't have any HD mods in 2023: Gamorrean Battleaxes, Stun Batons and Quarterstaffs. But some of you might recall DeadMan's Quarterstaff Replacement Pack from 2012 which replaced the Quarterstaff models with high quality models and textures... this mod was made for Kotor 2 though and was never ported for K1 players to enjoy... until now! 10 years after the release of the original, the Quarterstaff Replacement Pack has now been ported to K1 replacing the Quarterstaff and the Massassi Battle Staff. Quarterstaffs can either be bought from merchants or wielded by NPCs as weapons (such as the Black Vulkars and Outcast NPCs on Taris) Known Bugs: This mod shouldn't have bugs but if there is Just PM me on Deadlystream. It should be noted that the Massassi Battle Staff sometimes doesn't extend if equipped when the player is doing the "battle pose" animation. The weapon will be able to extend once this animation stops. Incompatibilities: Report any unknown incompatibilities to me on Deadlystream.com Permissions: You are free to use this models as you like as long as you give proper credit to DeadMan. Under NO CIRCUMSTANCES CAN ASSETS OF THIS MOD TO BE UPLOADED TO STEAM WORKSHOP. Special Thanks to: DeadMan: For the original mod! SithSpecter, RevanDark and AshuraDX: Assets used in the original mod by DeadMan! Bioware: For such an amazing game! Fred Tetra: For Kotor Tool! Stoffee: For TSLPatcher! Everyone who downloads the mod! Legal: THIS MODIFICATION IS NOT SUPPORTED BY BIOWARE/OBSIDIAN ENTERTAINMENT, LUCASARTS, DISNEY OR ANY LICENSERS/SPONSORS OF THE MENTIONED COMPANIES. USE OF THIS FILE IS AT YOUR OWN RISK AND THE ABOVE-MENTIONED COMPANIES OR THE AUTHOR IS NOT RESPONSIBLE FOR ANY DAMAGE CAUSED TO YOUR COMPUTER FOR THE USAGE OF THIS FILE.

A simple armband utility mod that I made for my own use when testing K1CP, because I was constantly annoyed at party members lagging behind and preventing me from transitioning to the next module. When activated it jumps the other two party members to the current party leader (i.e. whoever is using the armband). I figured other people might have a use for it as well. Installation: Run INSTALL.exe to install the mod. Add dp_ptyhrd_arm to your inventory via console or KSE. Equip to one of your armband inventory slots and activate by selecting it in the utility item slot in the UI (as you would a shield or adrenal). Credits: Icon taken from The Old Republic (and sloppily upscaled).

As many of you know, Pazaak is a rigged game in KOTOR 1. There are already mods that make the opponents' hands all 0 cards, but I always felt like that was too easy. This mod is a nice middle of the road. The original 3 decks used by opponents are as follows: Deck Level Card 1 Card 2 Card 3 Card 4 Card 5 Card 6 Card 7 Card 8 Card 9 Card 10 Deck 1 +3 -3 +4 -4 +5 -5 +5 -3 +4 -5 Deck 2 ±6 +4 -4 -2 +3 -2 -3 +3 +2 ±1 Deck 3 ±3 ±3 ±2 ±2 ±4 ±4 ±2 ±2 ±1 ±1 This mod changes them to this: Deck Level Card 1 Card 2 Card 3 Card 4 Card 5 Card 6 Card 7 Card 8 Card 9 Card 10 Deck 1 +1 +1 +2 +2 +3 +3 +4 +4 +5 +5 Deck 2 +3 -3 +4 -4 +5 -5 +5 -3 +4 -5 Deck 3 ±4 +4 -4 -2 +3 -2 -3 +3 +2 ±1 Obviously I can't fix the RNG where sometimes the opponent will just draw to 20 (4 times in a row...), but hey...chalk that up to shady characters cheating NOTE: I give permission for anybody to do whatever they like with this file. If you're unsure if the thing that you're doing is safe, legal, or possible, that's your problem

Droid Overhaul 1.0 By djh269 Date: 12.03.2024 This comprises four separate mods as seen below: TSL Droid Items Port Description: This ports most of the Droid TSL Items into K1 and distributes them across all planets found in K1. Please see below for item stats: Advanced Baragwin Droid Items V2 Description: Back in 2004 Achilles released a mod called Advanced Baragwin Droid Upgrades found here: https://lucasforumsarchive.com/thread/135599#post-1. I wasn't on Lucasforums when it was still available and I wasn't able to download the mod from his website. 20 years later after the initial release I've decided to recreate it. This mod adds 9 Advanced Baragwin Droid items and 1 normal version of a Baragwin Droid item (Droid Interface). Please see the below for item stats: Droid Feat Gain and Skill Changes Description: - T3-M4 feat gain is now the same as Scouts (increased by 1 feat in total). - T3-M4 now gains the same skills as a Scoundrel (increased by 4 skill points per level). - HK-47 feat gain is now the same as Soldiers (increased by 11 feats in total). Droid Feat Availability Change Description: - A small change to the feats that are available to both HK-47 & T3-M4. - Changes the Blaster Integration feat description of T3-M4 to match up with his ability to use new larger blaster types. - Grants Weapon Proficiency Blaster Rifle and Heavy weapons to T3-M4 at level 1 as per other characters. This is a duplicate of my other mod found below, I wanted to have an all for one Droid Overhaul and decided to include the file within this mod, for the screenshots of the changes please refer to the below link: https://deadlystream.com/files/file/2420-droid-feat-availability-change/ Compatibility: Should be compatible with any mods, if not, reach out and I will seek to change that. Mod used in screenshots: Credits: Fred Tetra - KOTOR Tool Cortisol - Holopatcher Achilles - For his original mod Offthegridmorty - For helping me fix the Droid Shock Arm item

Deadmans TFU Lightsaber pikes for K1 1.0 By djh269 Date:18.02.2024 Description: As per request I have ported over Deadmans Saber pikes from TSL into K1. You can find the Pikes on one of Korribans merchants. https://deadlystream.com/files/file/138-tfu-lightsaber-pikes-for-tsl/ Compatibility: Should be compatible with any mods, if not, reach out and I will seek to change that. Credits: Deadman - For the original TSL mod Holopatcher - Cortisol

The mod now uses HoloPatcher as installer. 1.Description The Jedi Consular, Jedi Master and Sith Lord classes learn 3 Force Forms not available to other classes. One of them, Force Affinity, is generally considered useless because it has only one effect: +500% Force Point regeneration in combat. Force Channel Form (available to all classes) gives the same bonus (not mentioned in the description of the Form) in addition to several other effects. So, the real problem here is not that Force Affinity is "useless", but that Force Channel is (unintentionally) overpowered. This mod offers 3 solutions: fixing overpowered Force Channel Form or replacing the original Force Affinity Form bonus with new one (recommended). Don't install them both at the same time. 1) The "Force Channel Fix" option will change the undocumented "+500% FP regeneration in combat" bonus of Force Channel Form to a more balanced +100%, making Force Affinity more viable. New bonus of Force Channel: FP Regeneration: +50% (non-combat), +100% (in combat) Force Power Damage: +3 Saves vs Force Powers: +2 2) The "Force Amplification" option will replace the FP Regen bonus of Force Affinity with an increased range for mass Force Powers (based on the cut Force Amplification form). New Bonus of Force Affinity: Force Power Range: +100% Opponents' Saves vs Force Powers: +3 Note: the max distance between the caster and the target to cast Force Power won't change, only the radius of the mass Force Power's effect. The increased range will be useful for such Powers as MASS STASIS, FORCE WHIRLWIND/FORCE WAVE, FORCE STORM, FORCE SCREAM chain, INSANITY, CRUSH OPPOSITION, HEAL chain, IMPROVED/MASTER FORCE DRAIN, IMPROVED/MASTER BATTLE MEDITATION and some others. 3) "Force Shell" option will allow to use the Force to absorb part of damage received (technically, to automatically restore HP depending on the amount of damage received). New Bonus for Force Affinity: Restores 50% of HP from damage received at the expense of an equivalent amount of FP ------------------------------------------- 2.Installation This mod uses HoloPatcher installer. The installer for Windows comes with the mod; installers for Linux and Mac should be downloaded from the HoloPatcher mod page (https://deadlystream.com/files/file/2243-holopatcher). Warning: TSLPatcher won't work because this mod uses specific features of HoloPatcher. 1.Launch "HoloPatcher.exe". 2.Choose one of "Force Channel Fix", "Force Amplification", "Force Shell" options from dropdown menu. 3.Select your game's folder (where "swkotor2.exe" is located) and click Install. ------------------------------------------- 3.Uninstallation Uninstallation is possible as long as you didn't install other mods after this one, otherwise you must first uninstall those mods. Either manually delete the mod files and copy back unaltered files located at the backup/{date} path in the mod folder, or use uninstall Shell (Bash), PowerShell scripts provided by HoloPatcher. ------------------------------------------- 4.Known issues "Force Shell" option: if the player is attacked by several enemies, health recovery may not occur immediately, but after several or all attacks in the current round. ------------------------------------------- 5.Compatibilty The mod is incompatible with mods that modify "k_hen_heartbt01.ncs" script. Additionally, "Force Amplification" option is incompatible with mods that modify "k_sp1_generic.ncs", "k_hen_heartbt01.ncs","k_sup_healing.ncs" and "k_inc_force.nss" (some mods that add and edit Force Powers use them). ------------------------------------------ 6.Permissions This mod may not be modified or distributed without the explicit permission of the author. This mod may be reuploaded / posted on other sites only if it is unavailable both on DeadlyStream, and on Nexus, and there is no contact with the author for at least 3 months. ------------------------- 7.Credits Fred Tetra - KOTOR Tool Blue - KotOR Scripting Tool Cortisol and th3w1zard1 - For HoloPatcher/PyKotor Stoffe and HIGH LEVEL FORCE POWERS MOD V2.1 mod - for inspiration TamerBill and Content Pack: Feats and Powers - for inspiration Special Thanks to JCarter426 --------------------------- 8.Contact PM me on DeadlyStream or Nexus. Disclaimer THIS MODIFICATION IS PROVIDED AS-IS AND IS NOT SUPPORTED BY BIOWARE/OBSIDIAN ENTERTAINMENT, LUCASARTS, DISNEY OR ANY LICENSERS/SPONSORS OF THE MENTIONED COMPANIES. USE OF THIS FILE IS AT YOUR OWN RISK AND THE ABOVE-MENTIONED COMPANIES OR THE AUTHOR IS NOT RESPONSIBLE FOR ANY DAMAGE CAUSED TO YOUR COMPUTER FOR THE USAGE OF THIS FILE.

Description: Not many Retextures for TSL have redone Kreia in a manner that stays true to her original appearance that upscales her textures and changes only a few things. I've made a retexture and released it here that does this, with a bonus that doesn't have her clothing on her neck based off of my mod that already does this. Textures have been upscaled to 2048 x 2048 and I've applied a cloth texture to her robes and a leather texture to her yellow-biege area near her head. Installation: 1. There are 2 folders that contain the retextures: Neck Clothing and No Neck Clothing. Choose which one you would like to use based off of the Screenshots on this page. 2. Copy the files from the folder you have chosen and paste them into the "Override" folder found in the Kotor 2 TSL directory. Overwrite any files if necessary. 3. THIS STEP IS HIGHLY RECOMMENDED, BUT OPTIONAL. Search for any files that have the same name as my mod that have a ".TPC" file extension or a ".DDS" file extension and delete those. They overwrite the ".tga" file format I use and could cause crashes with combination of my mod. UnInstalling: Delete the files from my mod that are in your "Override" folder found in the Kotor 2 TSL directory. Compatability: Compatible with TSLRCM and K2CP. It isn't compatible with anything that has "PO_Pkreia.tga", "P_KreiaH.tga", "P_KreiaH.txi", or "P_KreiaA.tga" or anything that has the same names as these files that end with ".TPC" or ".DDS". Compatible with the Kotor 2 Mod Build, but be sure to delete "P_KreiaH.tpc", "PO_Pkreia.tpc", and "P_KreiaA.tpc" located in the "Override" folder found in the Kotor 2 TSL directory. Tools used: GIMP Kotor Tool Permissions: Do not Re-Up[load files from this mod anywhere else, unless if you include it in your own mod and I have been given visible credit. Legal: THIS MODIFICATION IS PROVIDED AS-IS AND IS NOT SUPPORTED BY BIOWARE/OBSIDIAN ENTERTAINMENT, LUCASARTS, DISNEY OR ANY LICENSERS/SPONSORS OF THE MENTIONED COMPANIES. USE OF THIS FILE IS AT YOUR OWN RISK AND THE ABOVE-MENTIONED COMPANIES OR THE AUTHOR IS NOT RESPONSIBLE FOR ANY DAMAGE CAUSED TO YOUR COMPUTER FOR THE USAGE OF THIS FILE.

======================================================== KNIGHTS OF THE OLD REPUBLIC II SOURCE FILE ======================================================== New_Lightsaber_Blade_Model_TSL_v1 ================================= Author: Crazy34 Contact: PM me on Deadlystream For: TSL Date: 03/02/2021 ================================= DESCRIPTION: The vanilla lightsaber blades in Kotor and TSL look bad in my opinion. So, I tried to improve them by adding a dynamic ambient light to the blade (environmental lightning), which works quite well. Since this is hard-coded in the model I also optimized the blade plane models to have a different UV layout inspired by Sithspecter's work. I also simplified their geometry and fixed the different brightness bug (different brightness of the blade when viewed from the front compared to the back). Additionally, I included 3D models for the core of the blade and the inner glow of the blade, which can now be used to create black core sabers as seen in SWTOR. The glow - as well as the models - are fully animated to work as the vanilla blades. The hilts are updated together with the blades including hilts from Kaidon Jorn's SLM 2.0 mod. Summary: - All saber hilts are updated with hilts from Kaidon Jorn SLM 2.0 mod (I love it!) All credits for the hilt models, textures and icons go fully to him! - Ambient light for lightsabers - 3D models for blade core and inner glow - Symmetric lightsaber blade planes with a modified version of Sithspecter's crossguard saber UV layout. (Compatible with his unstable textures also included with all credits going to Sithspecter.) - Black core sabers are possible - Homogeneous brightness of the blade (no more “brighter blades when viewed from the front” happening any more) - All sabers are fully upgradeable (added black core and unstable crystals as well as crossguard versions of them) How to use the new lightsabers: Get the black core, unstable and crossguard sabers or crystals by cheating them by using the giveitem command or use KSE to include them in your inventory. The item codes are organized as follows: Lightsaber and crystal follow the standard naming scheme: Black core: 51-60 Unstable: 21-30 Crossguard: 101-110 Crossguard, black core: 111-120 Crossguard, unstable: 91-100 For example: giveitem u_l_colo_51 (Blue, Black core crystal) giveitem u_l_colo_92 (Red, unstable crossguard crystal) giveitem g_w_lghtsbr118 (Viridian, crossguard unstable lightsaber) giveitem g_w_dblsbr025 (Purple, unstable double blade lightsaber) giveitem g_w_shortsbr53 (Green, black core short lightsaber) !!!! Important: If you put a crossguard crystal in either a short lightsaber or double blade lightsaber the crystal will be transformed into its normal non crossguard version! I HOPE that in the future some talented texture artist will create better looking blade textures using these new blade models. I plan to upload a Modders Resource explaining the blade system in detail. CREDITS: Kaidon Jorn: Lightsaber Hilts models and textures and icons are created by Kaidon Jorn and taken from his SLM 2.0 mod, which you can find here: https://deadlystream.com/files/file/551-schematic-lightsaber-mod-slm/ Thank you very much for the permission to use your models and hilts here. They are amazing and I enjoyed working with them. Sithspecter: The new layout for the lightsaber blades plane models are inspired by Sithspecter's animated Crossguard Lightsabers mod for KOTOR which can be found here: https://deadlystream.com/files/file/1314-crossguard-lightsabers/ Thank you very much for the permission to include your animated unstable blade texture and to modified them to include the new TSL colors. ___________________________________________________________ COMPATIBILITY: It should pretty much be compatible with any mod that doesn't use the same crystal and lightsaber model slots. This mod should be compatible with TSLRCM. However, please notify me in the release thread if any bugs do appear that are not listed below. ___________________________________________________________ INSTALLATION: Use the TSLPatcher multiple times. You can choose which lightsabers you want. So, for example say you are only interested in the normal saber update and the related crossguard sabers: Then install the standard saber first and second run the TSLpatcher again and install the crossguard sabers. The crossguard sabers require to have their related non-crossguard sabers installed first. The TSLPatcher is set up to only install a certain part of the mod and requires multiple runs to install all sabers. It should install everything correctly. UNINSTALL: Navigate to the backup folder and place the contents into the Override folder. Remove all files from the tslpatchdata folder of this mod from your override folder. ___________________________________________________________ BUGS: The tip of the blade has a spike which comes from a deformation of the lightsaber planes. This is also present in the original model. I was not able to find a fix. (Sorry about that.) The lightsaber hilts will clip through the blades. (Unfortunately, DarthParametric has said that it is not possible to fix this.) ___________________________________________________________ PERMISSIONS: You may use this mod as you see fit. Display it in screenshots, make it compatible with your mod. However, do please give credit where it's due, and DO NOT release it with any of your mods without my permission. If you have any ideas for improvements, or if you want to you can mod them yourselves and include them in the mod. Saves me time and I'll give you credit for what I put in. ___________________________________________________________ THANKS: Fred Tetra: All the thanks for KotOR Tool. TK102: All the thanks for K-GFF. ndix UR: All the thanks for the kotorblender plugin, which I used to create the blade 3d models. bead-v: All the thanks for Mdledit and constantly updating it. Without it this mod would not be possible. Thanks also for the comments on the ascii code. Kaidon Jorn: All the thanks for giving me the permission for using the hilts textures and icons. With these included this is a real mod. Thank you so much. Sithspecter: All the thanks for giving me the permission to include his animated blade textures and to modify them. Also i want to thank you for inspiring me to start modding KOTOR in the first place. Jorak Uln: All the thanks for the constant feedback, suggestions and beta testing of the preliminary versions of the mod. JCarter426: I want to thank him for providing information regarding lights in KOTOR and the documentation. DarthParametric: I want to thank him for answering all my questions and being so helpful when creating and tuning of the models. Sith Holocron: For minor proofreading of the mod documents. For the initial feedback on the ambient light, I want to thank: DarthVarkor, Stormie97, ebmar. Also, I want to thank all the modders out there whose work I've consistently studied and learned from. ___________________________________________________________ LEGAL: THIS MODIFICATION IS PROVIDED AS-IS AND IS NOT SUPPORTED BY BIOWARE/OBSIDIAN ENTERTAINMENT, LUCASARTS, DISNEY OR ANY LICENSERS/SPONSORS OF THE MENTIONED COMPANIES. USE OF THIS FILE IS AT YOUR OWN RISK. NEITHER THE ABOVE MENTIONED COMPANIES NOR THE AUTHOR ARE RESPONSIBLE FOR ANY DAMAGE CAUSED TO YOUR COMPUTER FOR THE USAGE OF THIS FILE.

This mod edits the various landing pad areas so that you can see the through the Ebon Hawk's and Telos shuttles' cockpit windows, which should be a bit more interesting than the blacked-out windows in the vanilla game. It also adds more detail to the room which is visible through the hole in the side of the ship in the prologue. This mod includes some model fixes to the Telos hangars and Telos shuttle crash site developed by PapaZinos, which are included here with permission. I have also made the following area model improvements: - Added proper lightmaps and missing geometry to the Ebon Hawk on Malachor V (i.e. landing gear hatches, the exit ramp, and the entire port side). Also patched the chunk missing from the starboard side for better consistency with the prerendered cutscenes. - Fixed the flickering windows at the Citadel Station Entertainment Module's shuttle terminals. - Changed the texture for the base of the crane in the Telos Academy to one that doesn't look like concrete. - Added unique environment map reflections for the Ebon Hawk similar to KOTOR 1 ("Enhanced Reflections" version only). - Replaced the 512x512 vanilla Ebon Hawk texture with the 1024x1024 version from KOTOR 1 ("Enhanced Reflections" version only). Because mods that edit the same area models are incompatible by nature, I have included optional compatibility patches for use with other notable mods. Please see the "Compatibility" section below for further information. **IMPORTANT**: There are two versions of this mod: - Enhanced Reflections - Adds new area-specific reflections to the Ebon Hawk's exterior. Recommended if you do not use any mods that reskin/upscale the Ebon Hawk exterior (or if you do and are willing to do some extra work to make them compatible). - Reskin Friendly - More readily compatibility with reskins of the Ebon Hawk exterior. Does not include the new reflections. Thank you for downloading, and I hope you enjoy this mod! ------------------------------------------------------------------- INSTALLATION If you are using one or more of the mods listed in the "Compatibility" section below, install them first. Run "INSTALL.exe" and follow the prompts. It is normal to see warnings that 202tel.mod and 222tel.mod already exist and have been skipped. When installation is complete, copy the files from any required compatibility patches into your game's Override folder, overwriting when asked. If you are using TSLRCM from the Steam Workshop, see this guide for how to combine installer-based mods with the Workshop: https://steamcommunity.com/sharedfiles/filedetails/?id=488641307 For best results, I recommend using a save from before visiting the Citadel Station Entertainment Module for the first time. However, this is not required. If you continue from a later save, all you will miss are a couple of pilots for the Entertainment Module shuttles. ------------------------------------------------------------------- COMPATIBILITY This mod is compatible with The Sith Lords Restored Content Mod (TSLRCM). For best results, install this mod after TSLRCM, any of the mods listed below, or any other mods which make significant edits to the Telos Entertainment Module. Except as noted below, this mod is incompatible with any other mods that edit the same files. The main installation is compatible with following mods: - Ultimate Citadel Station Repairs by PapaZinos (https://deadlystream.com/files/file/2059-ultimate-citadel-station-repairs/) - Telos Model Repairs by PapaZinos (https://deadlystream.com/files/file/2059-ultimate-citadel-station-repairs/) I have also included compatibility patches for the following mods: - KOTOR 2 Community Patch (K2CP) (https://deadlystream.com/files/file/1280-kotor-2-community-patch/) - M4-78 Enhancement Project (https://deadlystream.com/files/file/277-m4-78-enhancement-project/) - High Quality Skyboxes II for TSL by Kexikus (https://deadlystream.com/files/file/1793-high-quality-skyboxes-ii/) - Realistic Nar Shaddaa Skybox by Sharen Thrawn (https://www.gamefront.com/games/knights-of-the-old-republic-ii/file/realistic-nar-shaddaa-skybox) - Telos Polar Academy Hangar Skybox by DarthParametric (https://deadlystream.com/files/file/1389-telos-polar-academy-hangar-skybox/) - Coruscant Jedi Temple by deathdisco (https://deadlystream.com/files/file/585-coruscant-jedi-temple-by-deathdisco/) - Nar Shaddaa Landing Pad Repair by PapaZinos (https://deadlystream.com/files/file/2004-nar-shaddaa-landing-pad-repair/) - Spark Effect - Ebon Hawk by PapaZinos (https://deadlystream.com/files/file/2314-spark-effect-ebon-hawk/) This mod is compatible with most reskins and texture mods. If you use the "Enhanced Reflections" install package with a mod that reskins the exterior of the Ebon Hawk, the Telos military base, and/or the Telos polar academy, follow the steps below. USING RESKIN MODS WITH ENHANCED REFLECTIONS ------------------------------------------------------------------- If you are using an Ebon Hawk reskin with the "Enhanced Reflections" version, perform the following steps: 1. Make a copy of PER_EH1.tga/txi for each row in the table below, named to match the Texture Name column. 2. Open each of the resulting TXI files in a text editor and change the envmaptexture or bumpyshinytexture parameter to the corresponding "EnvMap" in the table. 3. Delete each corresponding TPC file from this mod, as well as kor_ehok.tpc. Texture Name EnvMap Notes: wk_dan_eh1 WK_CM_DanPad wk_dxn_eh1 WK_CM_DxnHawk wk_nar_eh1 WK_CM_NarPad wk_per_eh1 WK_CM_PerHang wk_telac_eh1 WK_CM_TelAcad wk_telcit_eh1 WK_CM_TelHang wk_cor_eh1 WK_CM_CorPad Only needed if using with Coruscant Jedi Temple by deathdisco wk_m478_eh1 WK_CM_M478Pad Only needed if using with M4-78 If the reskin includes any of the following files, open their TXIs and change the "envmaptexture" or "bumpyshinytexture" as follows. Also delete the conflicting TPC file from this mod. Texture Name EnvMap 002_ebo_main1 WK_CM_PerSpace 002_ebo_main3 WK_CM_PerSpace mal_ebo_main2 WK_CM_MalHawk If you are using a reskin mod for the Telos military base and/or polar academy with the "Enhanced Reflections" version, I recommend doing the following: 1. Make extra copies of tel_tr07.tga/txi and rename them to wk_telacadmtl.tga/txi. 2. Open wk_telacadmtl.txi with a text editor and change the envmaptexture to WK_CM_TelAcad. 3. Delete the version of wk_telacadmtl.tpc from this mod. ------------------------------------------------------------------- CREDITS KotorBlender by seedhartha MDLedit and KOTORmax by bead-v tpcview and tga2tpc by ndix UR NWNSSCOMP by Torlack and tk102 K-GFF by tk102 TSL Patcher by stoffe ERFEdit by stoffe and Fair Strides Kotor Tool by Fred Tetra Thanks to Kexikus, deathdisco, and DarthParametric for granting permission to include modified files from their mods for compatibility. Thanks to PapaZinos for also granting permission to include some of his model fixes as part of the standard installation. Thanks to Sharen Thrawn for creating the original Nar Shaddaa Realistic Skybox mod. The Telos shuttles' interiors are based on "Modder's Resource: Shuttle" by Darth InSidious and JCarter426 and are used in accordance with the permissions in its Readme file. Thanks to both of them for putting that together. The original resource may be downloaded here: https://deadlystream.com/files/file/381-modders-resource-shuttle/. This mod includes material ported from Knights of the Old Republic 1 by Bioware. ------------------------------------------------------------------- VERSION HISTORY 1.0 - Initial Release ------------------------------------------------------------------- DISCLAIMER AND PERMISSIONS This modification is provided as-is and is not supported by Disney, Lucasarts, or Obsidian. Use at your own risk. The author shall not be held responsible for damage to your game installation, computer, or saved games resulting from the use of this mod. The cockpit interior elements may be treated as a modders resource and used in other mods as long as appropriate credit is given to this mod's author. The new environment maps may also be used in other mods with appropriate credit. Use of any assets which are based on or incorporate material from other authors also requires permission from those authors. Other uses not described here of assets from this mod require the author's permission. This mod shall not be reposted on any sites other than Deadly Stream without permission.

============================================= A KNIGHTS OF THE OLD REPUBLICII: THE SITH LORDS MODIFICATION ============================================= AUTHOR: Marius Fett NAME: Secret Tomb Lightsaber Fixes DESCRIPTION: A simple little mod which fixes a few minor irritations in the secret tomb on Korriban: When you fight Malak at the start of the area, he will now attack with the longer style of lightsaber he used in K1, rather than the standard length which looks too short for someone of his height. The Dark Side apparition of Kreia will now wield a red lightsaber rather than the random blue one she used in the vanilla game. COMPATIBILITY WITH TSLRCM: I don’t foresee any issues with compatibility, if TSLRCM is installed first. INSTALLATION INSTRUCTIONS: Run the installer. PERMISSIONS: This mod may not be used without the explicit permission of the author. This mod may not be distributed on other sites without the express permission of the author.

Warning: ========== Both the 2.0 and the 2.1 update are available from the download button. You MUST download the 2.0 and install that BEFORE the 2.1 is installed. So, download "stlhforcep2.rar", install that, then come back and grab "sthlforcepowerv2u1.rar" and install that. ========== 2.0 Original Review on Filefront: 2.1 Update Original Review on Filefront:

Well, a year and 3 days ago I created a mod that changed the horrendous gaffi stick texture from a 64x64 monstrosity to a respectable 1024x1024. I also added a unique(ish) texture for the chieftan's gaffi, and modified that gaffi's description a bit to fit with my changes.

This is a companion to my K1 Main Menu Widescreen Fix mod. In a similar manner, it adjusts the model file for K1's main menu so that it properly fills the full screen width of widescreen aspect ratios (i.e. 16:9, 16:10). It is designed to be used in conjunction with ndix UR’s KotOR High Resolution Menus mod (as pictured). But of course the major feature is that it swaps out Darth Malak for Darth Revan. There are four versions included: Version A uses the vanilla Revan N_DarthRevan01 texture, upscaled to 2048x2048. This texture will override the original and be used by the Revan stunt model (or flowing robes mods) during the game. Alternatively, the menu model will make use of any third party texture of the same name, should you prefer those. Version B uses a uniquely named texture, so it will not override the one used in-game, and the menu model will not make use of third party textures. Additionally, the envmap mask on this texture was adjusted to tone down the shininess of the chest and arms, as I found that a bit too overpowering. Version C uses a further modified version of B's texture to also adjust the colour of the helmet/mask visor to make it a little more apparent. Version D takes this a step further and adds a slight glow (self-illumination) to the visor. Because the original vanilla background texture is very low resolution, it looks pretty terrible when scaled up to fullscreen at 1080 (or above). I created a new, higher resolution background texture that approximates the same look. Obviously this mod will not be compatible with any other mod that also alters/replaces the menu model (including my own - although the replacement KOTOR logos are compatible). As mentioned, it is intended to be used with ndix UR’s UI mod, and serves no real purpose without that mod. N.B.: This is NOT a widescreen mod! This is just an addition for when you are already using a widescreen mod like UniWS. Installation Instructions Extract the archive, navigate to the folder that contains your desired version, copy and paste the files into your Override folder, overwriting if prompted. If you are using version A and wish to use someone else's texture, don't copy N_DarthRevan01.tpc. Known Issues The crossed over belts lack a proper animation, so they are basically static. Even scaled up the Revan model lacks the shoulder width of the Malak model, so crossing the arms was a bit difficult to replicate. Acknowledgements Thanks to @bead-v for MDLEdit and KOTORMax. Thanks to @ndix UR for TGA2TPC. Thanks to @ebmar for enquiring about the feasibility of the Malak/Revan swap, leading me down the rabbit hole of actually making the mod.