corpsecotillion

It's the same texture with added pieces, like Chuundar's necklace. Once I made a base Wookiee texture it would just require a couple new layers on top to add the necklace or Hanharr's criss-cross things. Here is Chuundar next to an unnamed wookiee for comparison: As far as Carth, I probably will re-make him eventually. He admittedly is the first head model I've made so it's kinda rough, and his texture ended up with too much contrast among other things. I've got a list of things I want to do but I need a break from staring at Photoshop for a little bit haha

So I was in the middle of making a unique saber with special properties that drops from Darth Bandon when I had the thought that I'd negate the Solari crystal properties since Bandon is a dark sided individual and essentially, his saber would "suck" the goodness out of anything it touches. Which got me thinking. Is it possible to run scripts based on whether or not you have an item equipped? For example, you can only use stealth if you have a stealth field generator belt (or equivalent) equipped. Basically, I'm looking to make a mod that sets your PC down a path of corruption. You'll find a seemingly normal lightsaber that, while equipped, has you use a different table than the one in the Adjust Character Alignment section of k_inc_utility so you gain dark side points at 1.5-2 times the rate of normal. How difficult would it be to take this a step further and add additional conversation options based upon the saber being equipped? A lot of the options in K1 and TSL are rather cut-and-dry as to what's the light side and what's dark side. I'd like to add options that don't necessarily jump out as the DARK!! choices but add to slowly turning your PC evil. Also, my knowledge of scripting is kind of basic. I can look at a script and figure out what it does for the most part but I'm not an ace at creating things from scratch. TL;DR I wanna make a cursed saber that's gonna be pretty rad property-wise but essentially dooms you to the dark side. I don't know where to begin.

I just took a look at the rest of the wookiee's textures and it would appear that Zaalbar is the only one with a unique texture. Chundaar and Hanharr use the same texture as the rest of the wookiies. So if I skin Hanharr I'll probably do the rest of the K1 wookiees while I'm at it

I'll have to see how ambitious I get His model uses a completely different texture so sadly I can't take the easy way out and just recolor Zaalbar's texture haha

Have you been able to get crystals in rows 79-85? I experimented through row 90 because with both of djh269's mods there are a total of 21 unique crystals, and I could only add 14 in addition to the vanilla ones. In order to use the new crystals from both mods I had to cut out vanilla crystals

File Name: Zaalbar HD File Submitter: corpsecotillion File Submitted: 26 Apr 2017 File Category: Skins K1R Compatible: Yes Mission keeps bugging Big Z about a makeover... Looks like he finally gave in. Many, many hairbrushes (among other things) were harmed in the making of this mod. Literally everything on him is new, and in 2k resolution. Enjoy Click here to download this file

Guess who accidentally saved the psd with merged layers... There were going on 40 of them. All merged. Oops haha

I just got to Kashyyyk and I'm looking at Big Z like... damn son, your vanilla texture really sucks. This is probably only at like 60% completion... Rendering fur is tedious, especially when you're trying to find the right balance between "hairy" fur and "fluffy" fur. But hopefully when all is said and done, I'll have a high quality Zaalbar texture in 2k. Suggestions are appreciated

I humbly and graciously accept your meerkat! Also, I actually am using both your mods. which is part of why it took me so long to figure out how to get them all compatible. I WANTED THEM ALL haha. I did end up sacrificing a few vanilla crystals for the sake of the personalized crystals, and it works fine. I still get the vanilla crystals as loot since I didn't overwrite their uti's but basically they're just credit fodder now. I just changed the rows in the upgrade.2da and then removed the associated rows from the properties of my sabers. I did see in Rece's mod that he was able to get custom crystals in rows 44 and 45 to work, but I wasn't able to do so. I am running a SERIOUSLY mod-heavy game though. You might have better luck than I did.

So after a few days of battle with my game I figured out why I was having issues with your mod and figured I would share my findings to help you with fixing your mod. It's possible that it was all completely a user error on my end, but nonethless here's my discoveries: In a thread from a couple years ago (http://deadlystream.com/forum/topic/3228-k1-lightsaber-addon-help/?hl=%2Blightsaber+%2Baddon), Rece discovered that the upgrade.2da file does this weird thing where after row 31 it wraps back around to row 1, so any crystal you put in row 32 onward will change to a different crystal when you hit the assemble button. The good news is that there is a workaround, but it requires using filler rows. After some serious experimentation I was able to get 14 custom upgrade crystals to work in my game, but any more than that and you'll end up with the crystal changing phenomenon again. Without changing any vanilla upgrade rows, you can only add 7 of your custom crystals to rows 25-31, and then additionally you can add 7 more to rows 27-53. That means rows 32-46 are filler. Type whatever you want into first two columns. It really doesn't matter what you put; the rows simply need to exist as placeholders. Set the upgradetype column to anything EXCEPT 0 so it doesn't interfere with the other upgrade crystals. The other issue with the lack of properties on the crystals was either an issue on my end of a problem with the GFF list in your changes.ini. I honestly can't say which it was since I no longer have the install log to look at. All of my lightsaber uti files said something about a bad integer when I tried to open them in KOTOR Tool, so basically I just had to create a new properties xml and apply it to all my sabers. Hope this helps!

Try using Taina's Replacer after you export your edited model to compile the head back together with animations. Worked for me

It's based on PFHC05 but I made edits to the face also, not just the hair. Her jawline, cheeks, chin, lips, and nose have all been altered and should look different from the vanilla when compared side by side. Her texture isn't high res and I will probably rework the entire thing at some point instead... Her hair basically is just a recolored vanilla texture so yeah it's probably not the best at this stage

All the little 2da bunnies are safe

File Name: A Better Mira File Submitter: corpsecotillion File Submitted: 14 Apr 2017 File Category: Mods TSLRCM Compatible: Yes Have you ever noticed that Mira's poofy hair looks like a split top dinner roll? Her hairstyle in the concept art is wonderful and I always felt that her head model just kind of missed the mark. So I made some seriously heavy edits to the model and texture of PFHC05 until I came up with something a little more fitting for our friendly neighborhood bounty hunter. Her clothes have new colors to match the new vibe she's got going on also, and I reworked the neckline of her shirt a little. No .2da files in this so it's just a drag and drop installation. --corpsecotillion Click here to download this file

For whatever reason, if I launch GMax from the actual GMax executable, NWMax doesn't like to export. I can import and edit models that way, but if I want to export I have to open GMax by using nwmax.exe to start the program instead. Weird, but at least I got it working

File Name: Carth Onasi 2.0 File Submitter: corpsecotillion File Submitted: 13 Apr 2017 File Category: Mods K1R Compatible: Yes Carth and his weird head were due for an upgrade. Texture changes: -Higher resolution -New eyes -New eye color -New hair -New nose -New eyebrows -New and repositioned ears -Removal of forehead wrinkles -Overall adjustment of highlights and shadows Model changes: -Slimmed tip of the nose -Removal of double chin -Lip shape -Cheek shape -Chin shape -Jaw shape Drag and drop directly into override to install --corpsecotillion Click here to download this file

So I've been making textures for some time now but decided to try my hand at editing models. Keep in mind that it's been about a decade since I've touched any 3D modeling program, and as much as I'd rather be using 3ds Max, I'm no longer a student and can't get the free license. I have NWMax installed, I edited Carth's head, and I went to export and... it did nothing. Literally, nothing. Sanity Checks are turned off and neither the Export Geom Only or the Export Model+Animations buttons do ANYTHING AT ALL. I tried reinstalling NWMax, thinking that maybe I was missing a script, and that still hasn't fixed the issue, What am I missing? Any help at all would be greatly appreciated /sigh