Leaderboard
Popular Content
Showing content with the highest reputation on 04/21/2025 in all areas
-
1 pointBastila's Sith Holocron strongly implies that she left Korriban to find Revan, here is the full dialogue: Looking at this dialogue, it's somewhat conflicting with what's presented in TOR as what Bastila says here somewhat aligns with what Kreia says about Revan even though what Kreia says about Revan is directly retconned in TOR. The retcon could be explained as Kreia 'projecting' her own views onto Revan, though what Bastila says here will inevitably have to be explained in the ROR mod. I have a feeling the answer as to what Revan's "technique of mass conversion" is is probably explained in the half hour lore-dump that is the Enclave scene. Another bit of useful Dark Side Bastila lore is what she says to T3-M4: Using both the Sith Holocron and T3-M4, we can assume that Revan left his Sith Empire around 3954 BBY. Without the strong, unifying leader that is Revan, the Sith started fighting one another for control of the Empire. The Sith who remained were too weak to control the Star Forge, thus rendering it useless for producing new ships. Bastila appears to be somewhat aware of the threat of the "True Sith" on Dromuund Kaas and so instead of dying in the Sith Civil War she set out to look for Revan. It can be assumed that an alternative version of the Revan novel took place where, between Kotor I and Kotor II, Darth Revan, T3-M4 and Canderous went to Rekkiad and found Mandalore's Mask. After leaving Canderous behind, Darth Revan and T3-M4 took the Ebon Hawk to Nathema where they were shot down by Darth Nyriss and Scourge. After capturing Darth Revan, T3 was left alone on Nathema and spent years repairing the Ebon Hawk so that he could return to the known galaxy. By the time he had finished his repairs, it was 3951 BBY... just in time for the events of Kotor II. And just like in the Light Side ending, Bastila gave T3 the orders as stated above - "If he leaves, he will take you with him - but not I. He knows the bond we share may prove a weakness... but he will take you. If something happens, T3, then I need you to return to the Republic and find me. And if you cannot, then I need you to seek whatever help you can elsewhere, whether Jedi or the Sith... or someone in-between." It is possible that Bastila became privy to Revan's actual plans, Goto and Disicple both speak of Malak as a conquering brute whereas Revan's agenda seems to have run deep and alluded them both. It is possible that Bastila left Korriban to find Revan, she might've found Nathema, though she did not find the True Sith who had captured Revan and so, as she ordered T3, had returned to the Republic as they were the only ones with the capacity to stop the True Sith now. And as I've probably discussed in the diary, only Carth would've known of the full extent of Bastila's betrayal if Revan was Dark Sided. It makes no difference whether Revan and Light Side or Dark Side as Bastila was technically a Sith in both endings, one has her redeemed and save the day and the other has her "redeemed" years later (Again, only Carth would know of the full extent of Bastila's betrayal so everyone else is oblivious to her past). Logan wants "replayability" with the ROR mod, you see that sort of thing with the player species and you'll see it here with Revan and Exile's gender and alignments wherein what you set impacts the story of past characters. In the case of Bastila, we can assume her thoughts and motivations towards the end of the mod will differ based on these factors. At the start of Drayen's dialogue in the Jedi Temple the player asks Drayen how his trip to Dantooine was to which Drayen directly mentions Luur Jada by name. As to what extent, I cannot say, but I can say he will make a cameo one way or another beyond this name drop.
-
1 pointYeah I did exactly that and got it all back to normal. I did forget to say that after I did it as it was getting late. Thanks.
-
1 pointReinstall everything from scratch, from what I remember the HoloPatcher automatically created uninstaller doesn't account for everything.
-
1 point
Version 1.1.0
23,332 downloads
*********************************** Knights of the Old Republic *********************************** TITLE: A Crashed Republic Cruiser on a Nameless World (1.1) AUTHOR: LDR FILENAME: ldr_repshipunknownworld FILESIZE: 176 MB -------------------------- INSTALLATION INSTRUCTIONS -------------------------- There are 2 available methods of installing A Crashed Republic Cruiser on a Nameless World. The standard installation method is done entirely though TSL Patcher, and doesn’t require you to do anything beyond simple button clicking. The manual installation is for those unable, for whatever reason, to use TSL Patcher, and involves the copying and pasting of files from folder to folder. NOTE: With the standard installation method, this mod is far more likely to work alongside any other mods you may currently have installed, which may not be the case should you use the manual installation method. I have attempted naming files in a way where there should be a minimum chance of mod conflicts, but you never know. This mod also has an "Optional" installation meant to use in conjuction with either/both of SithSpecter's High Quality Blasters and Colored Loadscreens mods. To uninstall, remove the files from their respective folders in the SWKotOR directory. ------------------------------ » STANDARD INSTALLATION ------------------------------ 1) Double click TSLPatcher.exe. 2) Click the "Install Mod" button and select your SWKotOR game directory. 3) Sit back, relax, and wait for the installation to complete. ------------------------------ » MANUAL INSTALLATION ------------------------------ 1) Open up the tslpatchdata folder. 2) Copy all files with a .wav extension and paste into the streamwaves folder located in your SWKotOR directory. 3) Copy all files with a .mod extension and paste into the modules folder located in your SWKotOR directory. 4) Copy everything else (With exception to changes.ini and info.rtf) and paste into the override folder located in your SWKotOR directory (If there isn't one, create one). ------------------------------ » OPTIONAL INSTALLATION ------------------------------ 1) Additional install options have been provided for additions to SithSpecter's High Quality Blasters and Colored Loadscreens mods. 2) Double click TSLPatcher.exe. 3) Click the "Install Mod" button and select your SWKotOR game directory. 4) Sit back, relax, and wait for the installation to complete. --------------- Mod Permissions --------------- You may not use any assets of this mod in your own mod without first contacting me. ------------ DESCRIPTION ------------ This mod adds 6 new modules, 9 new items (3 equippable inventory, 4 datapads, 2 keycards) on the Unknown World, making the crashed Hammerhead explorable. You must have a save before setting foot on the Unknown World. Please make sure to trigger the Rakata encounter on the beach before exploring the cruiser. -------------------------------------------------- » Version 1.1 Changes -------------------------------------------------- - Fixes a bug where the party was prevented from spawning in during the confrontation on the beach on a DS playthrough following completing the Temple. - Corrects reported spelling/gramatical errors. - Integrates optional install paths through TSLPatcher for additions to SithSpecter's High Quality Blasters and Colored Loadscreens mods. ----- BUGS ----- Any mods that modify the unk_m41aa OnEnter script will be incompatible with this mod. Exploring the cruiser before triggering the Rakata encounter on the beach can break the cutscene. To be safe, make sure to trigger this BEFORE exploring the cruiser. "Frame Buffer Effects" turned off in the swkotor.ini results in audio logs without the blue camera effect. If you find any please post them in the comments or send me a direct message. I will address them as soon as I can. ------------------- » MODULE/ITEM NAMES ------------------- For this to work correctly in conjunction with your own mod, you must not use any within the following list as names for your custom module/item reskins. m41ae m41af 152unk 153unk m41ai m41aj LHC LHW Blaster Pistol template 020 Forearm Band template 019 Gauntlet template 019 ------------- Voice Acting ------------- DarthTyren as Medical Officer Audio Log Mellowtron11 as Engine Officer Audio Log Sith Holocron as Republic Captain Audio Log Zhaboka as Kolgrim ----------- Permissions ----------- Permission granted from Darth InSidious to use his alternative beach Hammerhead textures. Permission granted from DarthParametric to utilize his edited mdls from both his Endar Spire and Harbinger Hull Repair mods. Permission granted from SithSpecter to utilize integration for his High Quality Blasters for Modders resource and colored loadscreen templates mod. Permission granted from Thor110 to repurpose his ported K1 Harbinger modules. ------- Credits ------- - To the people who created the tools which have allowed me to create this mod. - Kotor Tool..........................Fred Tetra - K-GFF GFF Editor/DLGEditor..........tk102 - ERF Editor/TSLPatcher...............stoffe - MDLOps..............................cchargin/JDNoa - Lipsynch Editor.....................JDNoa - XVI32 Hex Editor....................Chmaas - CSLU Toolkit........................Oregon Health & Science University My beta testers: djh269, jc2, N-DReW25 and Zhaboka. I couldn't have done this without you! JCarter46 and DarthParametric for handholding me with regards to literally all scripting that was above basic level. Thank you so much. Lachjames for his assistance in helping me generate/test .lip files. Snigaroo for bug reporting and feedback for the 1.1 patch. All of the wonderful folks at DeadlyStream (and Holowan Labs), that led me on and helped me when I hit a snag. All of you who downloaded this mod! Thank You! -
1 point
Version 1.0.1
2,169 downloads
This mod adjusts the statistics and starting equipment of the companions in Star Wars: Knights of the Old Republic, addressing some issues with game balance and consistency in theme. See the attached document or view online for a full list of changes and the rationale for each change. Installation You must start a new game to experience the full effects of this mod. Extract files from the downloaded archive. Run INSTALL.exe. Click "Install Mod" and select your game directory (default name SWKotOR). Uninstallation During installation, TSLPatcher generates a backup folder and a log recording which files were affected. Restore or delete all .utc files affected by this mod. Copy each .utc file from the backup folder to replace the one in your game's Override folder if a backup was created, otherwise delete the .utc file from your game's Override folder. Credits Design—Sniggles Implementation—JCarter426 KOTOR Tool—Fred Tetra TSLPatcher—stoffe & Fair Strides ERFEdit—stoffe & Fair Strides K-GFF—tk102 xoreos tools—xoreos team https://xoreos.org/ License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. -
1 point
Version 1.5
1,546 downloads
In the vanilla game, Yavin Station is the only location that does not have a proper hangar where the player can walk to and from the Ebon Hawk. This mod adds one that generally matches the original landing and takeoff cutscenes, although I have taken a few artistic liberties. You may notice that, as with the original cutscenes, it looks remarkably similar to the Ahto City hangar on Manaan. I can only assume that the same architect worked on both projects. The hangar comes in two variants: with and without a visible forcefield effect over the hangar entrance. By default, the forcefield is invisible. To change to a visible forcefield, see the INSTALLATION instructions below. Aside from adding the new hangar, I have also made a few additional edits to the station: - Changed the stars to use a different, less-repetitive vanilla star texture. - Fixed some questionable geometry at the main observation window. - Edited the walkmesh by the observation window to correct a glitch where the player could teleport into space, originally documented by the KOTOR 1 Community Patch (K1CP). (This mod's walkmesh fixes were made from scratch and do not reuse any K1CP material.) - Added a proper load screen for the station. (New for version 1.4) - Added corridor geometry behind the various locked doors, in place of the original 2D backdrop. (New for version 1.4) IMPORTANT: To experience the new hangar, you will need a save from before visiting Yavin Station for the first time. Thank you for downloading, and I hope you enjoy this mod! ------------------------------------------------------------------- INSTALLATION Run INSTALL.exe, and follow the prompts. If you have other mods installed, it is normal to see a warning that liv_m99aa.mod already exists and has been skipped. If you are using "High Quality Cockpit Skyboxes" by Sithspecter, see below for additional instructions. By default, the forcefield at the hangar entrance is invisible. To add a visible forcefield effect, run INSTALL.exe again after finishing the main installation, and select "Optional: Add Visible Forcefield". Version 1.4 changes the appearance of the added airlock doors so that they look less like the Sith base doors. If you prefer the appearance from version 1.0, copy the files in the folder "Option - Alternate Airlock Door (v1_0)" into Override. ------------------------------------------------------------------- COMPATIBILITY This mod is incompatible with other mods that edit the area geometry of Yavin Station. Reskins are technically compatible, but depending on how drastic they are, they might look strange with a few new textures from this mod. If you are using a reskin of the Ebon Hawk's exterior, see the instructions below. This mod is compatible with the Kotor 1 Community Patch (K1CP). It has not been tested with the KOTOR 1 Restoration (K1R) or the K1 Yavin IV Planet Mod, but I do not expect any significant compatibility issues. For best results, install this mod after K1CP or K1R and before any other mods that alter Yavin Station. If you are using a mod that changes the station's load screen (i.e. "Loadscreens in Color" by Sithspecter), install it after this one, and overwrite "load_liv_m99aa.tpc" if prompted. If the loadscreens use .tga files, you will need to manually delete this mod's version of "load_liv_m99aa.tpc" from Override. ------------------------------------------------------------------- HIGH QUALITY COCKPIT SKYBOXES If you are using "High Quality Cockpit Skyboxes" by Sithspecter (which I highly recommend), I have included compatible skybox textures matching my new hangar. After installing the cockpit skyboxes, perform the following steps: 1. Open the folder "HQ Cockpit Skybox Textures" from this mod. 2. Copy the TPC files corresponding to the desired quality into your Override folder. 3. If present, delete the following files from Override: - ebo_yab.tga - ebo_yaf.tga - ebo_yal.tga - ebo_yar.tga - ebo_yat.tga If you are using the alternate airlock door option, also copy the appropriate version of "ebo_yaf.tpc" from the "Alternate Airlock Door" folder into Override, overwriting if asked. "High Quality Cockpit Skyboxes" may be found at https://deadlystream.com/files/file/938-high-quality-cockpit-skyboxes/ ------------------------------------------------------------------- EBON HAWK RESKINS To use a reskin of the Ebon Hawk's exterior with the new hangar, perform the following steps: 1. Make extra copies of "LSF_EHawk01.tga" and "LSF_EHawk01.txi" (if present) from the reskin, and rename them as "yvh_ehawk.tga" and "yvh_ehawk.txi", respectively. 2. Open the new "yvh_ehawk.txi" with a text editor, and change the entry after "envmaptexture" or "bumpyshinytexture" to "CM_WK_YAVHGR". 3. Copy both files into your Override folder. 4. Delete "yvh_ehawk.tpc" from your Override folder. ------------------------------------------------------------------- CREDITS MDLedit and KOTORmax by bead-v KotorBlender by seedhartha tpcview and tga2tpc by ndix UR NWNSSCOMP by Torlack and tk102 DeNCS by JdNoa and Dashus K-GFF by tk102 TSL Patcher by stoffe and Fair Strides ERFEdit by stoffe and Fair Strides Kotor Tool by Fred Tetra NormalMap Online by Christian Petry (https://cpetry.github.io/NormalMap-Online/) New textures and models were based on existing KOTOR material by Bioware. Camera angle for the load screen was inspired by "Loadscreens in Color" by Sithspecter (https://deadlystream.com/files/file/916-loadscreens-in-color/). Bump map created following DarthParametric's tutorial here: https://deadlystream.com/topic/9353-bump-mapping-tutorial-request-for-novices/ Special thanks to: - DarthParametric for suggesting the visible forcefield effect, providing an example from K1CP, and providing feedback on the result, as well as for providing feedback on the new corridor extensions for version 1.4. - muitafruita for reporting that the Ebon Hawk was missing its venting sound. - Thor110 for encouraging me to create a new door texture that looks less like a knockoff of the Sith base doors. ------------------------------------------------------------------- VERSION HISTORY 1.0 - Initial Release 1.1 - Added an option for a visible forcefield effect 1.2 - Added particle emitters at the ends of the visible forcefield 1.3 - Fixed the sound effect of the Ebon Hawk venting in the hangar 1.4 - Created a new texture for the airlock doors - Added a new load screen for Yavin Station - Added corridor geometry behind the various locked doors - Edited airlock door frames to improve seal - Revised particle emitter settings and UV mapping for the visible forcefield option - Consolidated and rearranged lightmaps - Made various minor walkmesh and model improvements - Edited module .vis file to optimize performance - Added scripting code to prevent party members from being accidentally locked outside the airlock 1.5 - Reduced the pixelation of the Ebon Hawk's environment map - Revised the install process to edit the module's GIT, ARE, and module.ifo instead of overwriting them - Changed the ceiling beams' environment map to match the hangar space - Added a bump map to the ceiling beams - Coordinated mesh bumpmapping flags with the presence/absence of bumpmapped textures - Adjusted walkmesh properties over hangar door - Adjusted texture UVs for the fins on the shelf at the back of the hangar ------------------------------------------------------------------- DISCLAIMER AND PERMISSIONS This modification is provided as-is and is not supported by Disney, Lucasarts, or Bioware. Use at your own risk. The author shall not be held responsible for damage to your game installation, computer, or saved games resulting from the use of this mod. This mod shall not be reposted, in whole or in part, on any sites other than Deadly Stream without the author's permission. Assets from this mod shall not be redistributed in other modifications without the author's permission. -
1 point
-
1 point
Version 1.0.0
351 downloads
A simple armband utility mod that I made for my own use when testing K1CP, because I was constantly annoyed at party members lagging behind and preventing me from transitioning to the next module. When activated it jumps the other two party members to the current party leader (i.e. whoever is using the armband). I figured other people might have a use for it as well. Installation: Run INSTALL.exe to install the mod. Add dp_ptyhrd_arm to your inventory via console or KSE. Equip to one of your armband inventory slots and activate by selecting it in the utility item slot in the UI (as you would a shield or adrenal). Credits: Icon taken from The Old Republic (and sloppily upscaled). -
1 point
-
1 point
-
0 pointsA small update on something I have been working on over the past few days. Currently this all resides in a folder called "Korriban Expansion Works" The modders resource is intended for anyone that wishes to add the Library & Teachers Quarters rooms from TSL to the first game, the rubble has been removed and an empty level is included that just contains the assets that are present in the second game so they can be used as reference. I added the missing beds to the teachers quarters and the spotlights under the doors to both rooms and made a number of small edits to the models. There are a few small changes, such as the computers not being broken and each placeable now uses a string from the first games dialog.tlk ( Bag, Computer, Door, Footlocker ) as does the map note waypoint. I have of course also added these areas to the port of KotOR1 and have plans to make use of them eventually. As well as that I spent quite a while editing the visibility file after finding quite a few different spots from which you could see that rooms appeared or disappeared in both K1 and TSL. I am surprised that these made it into the game. There are quite a few more as well, but they can only be noticed from a long distance. I also spent a number of hours editing the minimap and correcting a sizing error present in the original mini map. I created a fixed version of the minimap for K1 as well which doesn't include the extra rooms, turns out some of the rooms are slightly out of line with the player so I tinkered with the map pixel by pixel until I could run around the edge of the entire level and everything felt right. On top of all this I fixed a few geometry errors where there were holes in walls or extra faces that weren't visible in both the TSL version of Korriban and the K1 version and added the spotlights under the doors to the two new rooms. This area didn't have any geometry at all so there was just a hole in the wall which was clearly visible when walking through this hallway. Here are some more screenshots showing the changes. Finally I have cleaned up a load more files that didn't need to be in the port or main portion of the project. Every step forwards is a step closer to completion, I know most people want me to get a move on and populate the areas with content, but I don't want to rush anything, I want to get the foundations laid and free of issues, expand upon and fix whatever I can and then set about adding new content. There is also the matter of making a functional launcher that includes a save importer and allows easy access to all of the relevant functions and is capable of launching both games, at the moment a basic launcher is included with the GitHub version and works but doesn't implement the save importer functions. Still looking for people to join the team, so if you have any modding experience with the games or just want to help out by testing, feel free to reach out to me. The modders resource version of this will be available as soon as it's authorised. I have also submitted Mobile M478EP and Mobile Coruscant. I think that's everything.