Search the Community

View File HQ Terentatek Replacement HQ Terentatek Replacement — KOTOR I Version 1.0.0 by ShaolinGhost Bring a new look and movement set to KOTOR I’s Terentateks. This replacement pairs a custom creature model and 4K textures with converted Star Wars: The Old Republic animations, including claw-slashing attacks, idle and movement cycles, damage reactions, death and roar motions. The replacement covers every creature using the original Terentatek appearance throughout the base game, including Kashyyyk, Korriban and scripted transformations. Existing encounter scripts, quests, statistics, loot and native soundset assignments are preserved. Campaign roars occur when the original game scripts or animation system request them. Requirements KOTOR I for PC. No additional mods, runtime DLLs, custom launcher or executable patches are required. TSLPatcher is included for Windows installation. The 4096 × 4096 textures require additional graphics memory. Installation Close the game and extract the entire ZIP into its own folder outside the game directory. Run TSLPatcher.exe, select Install Mod, and choose the KOTOR I folder containing swkotor.exe. Do not select Override. Wait for installation to finish and check the log for errors. Keep the installer and its backup folder. The installer merges the Terentatek appearance settings into an existing appearance.2da and preserves unrelated changes. Do not manually copy the supplied appearance.2da into Override. A new game is not required for this appearance replacement; restart the game after installing. Compatibility Install after other appearance-table mods. Mods that replace the same Terentatek appearance or the same model and texture resources conflict. Creatures assigned a separate appearance by another mod are outside this replacement’s scope. K1R compatibility has not been tested; the required compatibility field is therefore marked No. This release contains no test maps, test creatures, saves or plot scripts. The gallery includes four Blender model renders showing the front, profile, claw attack and roar, plus one in-game screenshot from the development test area. Render lighting differs from in-game lighting. Uninstallation Restore the files from this installation’s backup folder. Remove files created by the installer only when no previous version was backed up. See README.txt for the complete file list and appearance.2da instructions. Uninstall in reverse installation order to avoid discarding later mods’ table changes. Credits ShaolinGhost — custom creature model, textures and mod release. BioWare / Electronic Arts — SWTOR skeleton and animation source assets, converted for KOTOR I. BioWare / LucasArts — KOTOR I and its creature sounds. stoffe and Fair Strides — TSLPatcher. MDLOps contributors, the Blender project and the KOTOR modding community. Permissions Please contact ShaolinGhost on Deadly Stream before redistributing or using the custom model and textures in another release. Rights to original game assets remain with their respective owners. This is a free, unofficial modification and is not made, distributed or supported by BioWare, Electronic Arts, LucasArts, Lucasfilm or Disney. Submitter ShaolinGhost Submitted 09/07/2026 Category Mods K1R Compatible No  

Is there a mod that is just for the textures of the birds that fly around on Telos' surface and Dantooine? For some reason the birds are bright pink / purple. As if they have no texture. It's not a huge deal as its a minor thing. But is there a mod already out there that can fix this, or can one be made?

View File [K1] Rakghoul Fiend This mod overhauls the appearance and attributes of Rakghoul Fiend; an alpha ghoul found in the Undercity and the Lower Sewers which seem was intended to have an unique demeanor with them. # Background # When facing the Rakghouls in the Undercity and the Lower Sewers, I noticed that few of the raks named as Rakghoul Fiend but I saw nothing unique about them. Well, thought that they need an unique demeanor with them; hence the fruits of labor then. # About this Mod # This modification makes unique appearance for the Rakghoul Fiends [complete with their own unique sound-sets] found in the Undercity and the Lower Sewers, and also bump their attributes by an reasonable imbalance amount. Well, I didn't include a vanilla patch - guess you'll have to deal with them, luls. One aspects of uniqueness from them is they had their body upscaled for ~+20% with different looks compared to the generic ones. Few elements of this v1.0 skin; like the red eye - was inspired from Trex's "The Jedi Masters" Rakghoul, nuff-said - credits to Trex for make it happened. # Final Remarks # There's always room for improvements - critiques, comments, suggestions, questions and feedbacks for the next update are much appreciated - PM, write them on my feed or leave any on the mod's page as you please. And thank you! for downloading, and playing this mod. Hope you enjoy the mod as much as I do! Installation: run the installer [TSLPatcher.exe] then hit the [Install Mod ->] button! Uninstallation: replace the installed files with what was stored inside the generated 'Backup' folder. Particularly tar_m04aa.mod and tar_m05aa.mod; put these files to the 'modules' folder manually and overwrite when prompted. Also, by keeping the installog after the installation will help you to track which files goes to where. Compatibility: will be compatible with mostly anything - only make sure to install this mod after every mods has. Though haven't being tested with Kainzorus Prime's "[KotOR] NPC Overhaul Mod" and N-DReW25's "K1 Gameplay Improvement" installed, presumably they'll be compatible. But be advised that compatibility issue of this mod working along with them is not yet confirmed. Will not be compatible with any mods that force-overrides tar_m04aa.mod and tar_m05aa.mod or messing with this mod 2DA entries. For this mod to be effective you should at least load a saved game before entering the Undercity [tar_m04aa] and the Lower Sewers [tar_m05aa] module The mod is play-tested with KotOR 1 Restoration/K1R and K1:Community Patch/K1CP installed and is compatible with them Redistribution: for this particular full-version, I'm asking you not to redistribute them - I'd like to stay in touch with so I know where to provide supports. With initial release which is v0.8; I grant permission to redistribute them with usual policy applies. If you are to re-use an assets to a project you will be releasing, you don't have to ask for permission - but your generous intention is very much welcome. I'd love to know what others are up to, particularly if my work are included. And then, make sure to give credits to BioWare & LucasArts with the release - particularly with the inclusion of the assets. An appreciation to this lil' peasant here is also a very warm welcome, welcome. Credits: The Almighty Force which gave me chance to finish the mod LucasArts and BioWare for developing one of the best RPGs I've ever played! DarthParametric for past-present knowledge which allows me to create customs and for all the outstanding creation that I am a fan of, and for the information regarding model scaling also information about the INI setup which makes this mod a possibility JCarter426 for all his awesome work that I look up to - I learned a lot from his mod setup and been practice often using their method Inyri Forge for Female Mandalorians - which Sound Set's installation that I use as a guide for this mod Trex for TJM's Rakghoul texture which few elements being an inspiration ROTNR for Creating Module Files in KotOR tutorial which guides me on packaging the custom module Fred Tetra for the amazing KotOR Tool stoffe and Fair Strides for the magnificent TSLPatcher and ERFEdit VarsityPuppet for 2DA Editor Alpha bead-v for MDLedit, KOTORmax and its Scale Wizard script which a significant part of this mod development ndix UR for tga2tpc TK102 for K-GFF Werner Rumpeltesz for PlainEdit.NET Notepad++team for Notepad++ Adinos for Simple Model Viewer which very helpful to provide a quick preview of potential appearance for used model and texture All the Tool Makers wasn't mentioned - can't make it without y'all! All the inspiring streamers on DeadlyStream All the inspiring modders either active or inactive DeadlyStream for being a home; a place to hangout - to discuss and hosting my work DeadlyStream staffs for tirelessly improving and maintaining the site Snigaroo for hosting #mod_development on Discord > r/kotor - thanks! The place is so much fun! :jarjar: -eb Submitter ebmar Submitted 02/15/2019 Category Mods K1R Compatible Yes  

File Name: Emperor Turnip's HD Gizka File Submitter: Emperor Turnip File Submitted: 07 Jan 2018 File Category: Mods K1R Compatible: Yes Yet another HD retexture. May just do the rest as one big release! As usual, drop in override Click here to download this file

Emperor Turnip's HD Dewback View File Massively upsized and updated Dewback Texture. Part of an ongoing monster update for Kotor. Drop into Override, and enjoy Submitter Emperor Turnip Submitted 01/07/2018 Category Skins K1R Compatible  

So one of the things I'm aiming for in my not-upcoming mod is the ability to set your own allied turrets. Basically you set the turret like a mine and then use a spell activation item called a turret controller to build or break down the turret. This has no relation to the turret minigame, I'm talking about dynamically spawning in allied turret creatures similar to those you face throughout the game. Similar to the flamethrower mod I made, I'm considering releasing this piece as a quick standalone for TSL. This is to help identify any problems that placing creatures into arbitrary places in the game could cause. So I'm making this thread to gauge interest. Would you play this mod? Before you say yes, I'm asking if you are actually going to install it and try it out in a reasonable time frame. It would be for TSL and would work without having to use a fresh save. I'm not asking you to test anything specific, but if you do use it and something unexpected happens, I'd ask that you let me know about it. With that said, respond in this thread if you are interested. If you have questions about the details of what this mod would be, ask them here.

Does anybody know where I can get a cubemap for a Drexl? I'm working on some textures and I feel that this is the biggest thing missing. I was about to download the Modders' Resource Cubemap Pack but I wanted to make sure first. Plus, I don't have a clue on how to build one myself... Thanks!