Leaderboard

In the vanilla game, Yavin Station is the only location that does not have a proper hangar where the player can walk to and from the Ebon Hawk. This mod adds one that generally matches the original landing and takeoff cutscenes, although I have taken a few artistic liberties. You may notice that, as with the original cutscenes, it looks remarkably similar to the Ahto City hangar on Manaan. I can only assume that the same architect worked on both projects. The hangar comes in two variants: with and without a visible forcefield effect over the hangar entrance. By default, the forcefield is invisible. To change between the visible and invisible forcefields, see the INSTALLATION instructions below. Aside from adding the new hangar, I have also made a few additional edits to the station: - Changed the stars to use a different, less-repetitive vanilla star texture. - Fixed some questionable geometry at the main observation window. - Edited the walkmesh by the observation window to correct a glitch where the player could teleport into space, originally documented by the KOTOR 1 Community Patch (K1CP). (This mod's walkmesh fixes were made from scratch and do not reuse any K1CP material.) - Added a proper load screen for the station. (New for version 1.4) - Added corridor geometry behind the various locked doors, in place of the original 2D backdrop. (New for version 1.4) IMPORTANT: To experience the new hangar, you will need a save from before visiting Yavin Station for the first time. ALSO IMPORTANT: If you are upgrading from version 1.3 or earlier, a new save is also recommended to avoid issues with the lighting on the new airlock doors. Thank you for downloading, and I hope you enjoy this mod! ------------------------------------------------------------------- INSTALLATION Run INSTALL.exe, and follow the prompts. If you have other mods installed, it is normal to see a warning that liv_m99aa.mod already exists and has been skipped. If you are using "High Quality Cockpit Skyboxes" by Sithspecter, see below for additional instructions. By default, the forcefield at the hangar entrance is invisible. To add a visible forcefield effect, run INSTALL.exe again after finishing the main installation, and select "Optional: Add Visible Forcefield". If you have previously installed version 1.3 or earlier of this mod, you can upgrade by installing directly over the old version. Note, however, that you may need to reinstall any other mods which affect Yavin Station (specifically, any mods that edit m50aa.git). Version 1.4 changes the appearance of the added airlock doors so that they look less like the Sith base doors. If you prefer the appearance from version 1.0, copy the files in the folder "Option - Alternate Airlock Door (v1_0)" into Override. ------------------------------------------------------------------- COMPATIBILITY This mod is incompatible with other mods that edit the area geometry of Yavin Station. Reskins are technically compatible, but depending on how drastic they are, they might look strange with a few new textures from this mod. If you are using a reskin of the Ebon Hawk's exterior, see the instructions below. This mod is compatible with the Kotor 1 Community Patch (K1CP). It has not been tested with the KOTOR 1 Restoration (K1R) or the K1 Yavin IV Planet Mod, but I do not expect any significant compatibility issues. For best results, install this mod after K1CP or K1R and before any other mods that alter Yavin Station. If you are using any mods that change the station's load screen (i.e. "Loadscreens in Color" by Sithspecter), install them after this one. If they use .tga files, you will need to delete this mod's version of "load_liv_m99aa.tpc" from Override manually. ------------------------------------------------------------------- HIGH QUALITY COCKPIT SKYBOXES If you are using "High Quality Cockpit Skyboxes" by Sithspecter (which I highly recommend), I have included compatible skybox textures matching my new hangar. After installing the cockpit skyboxes, perform the following steps: 1. Open the folder "HQ Cockpit Skybox Textures" from this mod. 2. Copy the TPC files corresponding to the desired quality into your Override folder. 3. If present, delete the following files from Override: - ebo_yab.tga - ebo_yaf.tga - ebo_yal.tga - ebo_yar.tga - ebo_yat.tga If you are using the alternate airlock door option, also copy the appropriate version of "ebo_yaf.tpc" from the "Alternate Airlock Door" folder into Override, overwriting if asked. "High Quality Cockpit Skyboxes" may be found at https://deadlystream.com/files/file/938-high-quality-cockpit-skyboxes/ ------------------------------------------------------------------- EBON HAWK RESKINS To use a reskin of the Ebon Hawk's exterior with the new hangar, perform the following steps: 1. Make extra copies of "LSF_EHawk01.tga" and "LSF_EHawk01.txi" (if present) from the reskin, and rename them as "yvh_ehawk.tga" and "yvh_ehawk.txi", respectively. 2. Open the new "yvh_ehawk.txi" with a text editor, and change the entry after "envmaptexture" or "bumpyshinytexture" to "CM_WK_YAVHGR". 3. Copy both files into your Override folder. 4. Delete "yvh_ehawk.tpc" from your Override folder. ------------------------------------------------------------------- CREDITS MDLedit and KOTORmax by bead-v KotorBlender by seedhartha tpcview and tga2tpc by ndix UR NWNSSCOMP by Torlack, stoffe, and tk102 DeNCS by JdNoa and Dashus K-GFF by tk102 TSL Patcher by stoffe and Fair Strides ERFEdit by stoffe and Fair Strides Kotor Tool by Fred Tetra New textures and models were based on existing KOTOR material by Bioware. Camera angle for the load screen was inspired by "Loadscreens in Color" by Sithspecter (https://deadlystream.com/files/file/916-loadscreens-in-color/). Special thanks to: - DarthParametric for suggesting the visible forcefield effect, providing an example from K1CP, and providing feedback on the result. Also for providing feedback on my new corridor extensions for version 1.4. - muitafruita for reporting that the Ebon Hawk was missing its venting sound. - Thor110 for encouraging me to create a new door texture that looks less like a knockoff of the Sith base doors. ------------------------------------------------------------------- VERSION HISTORY 1.0 - Initial Release 1.1 - Added an option for a visible forcefield effect 1.2 - Added particle emitters at the ends of the visible forcefield 1.3 - Fixed the sound effect of the Ebon Hawk venting in the hangar 1.4 - Created a new texture for the airlock doors - Added a new load screen for Yavin Station - Added corridor geometry behind the various locked doors - Edited airlock door frames to improve seal - Revised particle emitter settings and UV mapping for the visible forcefield option - Consolidated and rearranged lightmaps - Made various minor walkmesh and model improvements - Edited module .vis file to optimize performance - Added scripting code to prevent party members from being accidentally locked outside the airlock ------------------------------------------------------------------- DISCLAIMER AND PERMISSIONS This modification is provided as-is and is not supported by Disney, Lucasarts, or Bioware. Use at your own risk. The author shall not be held responsible for damage to your game installation, computer, or saved games resulting from the use of this mod. This mod shall not be reposted, in whole or in part, on any sites other than Deadly Stream without the author's permission. Assets from this mod shall not be redistributed in other modifications without the author's permission.

Bubbling up from the font of dark knowledge, ndix UR presents KotOR High Resolution Menus, a UI mod package providing full high resolution menu and UI support for Knights of the Old Republic. The tyrrany of 640x480 menus and 6-item lists is over. Normally, when you increase the game's resolution using a widescreen patcher like UniWS, the menus stay very small in the middle of the screen and the borders get larger. This package is designed to be used *after* the widescreen patcher has done its work. It scales the menu screens up so that they fill the screen. This package requires modification of the swkotor.exe file using a supplied patcher, and is only known to work with GoG, 4-CD, and macOS (x86) versions of the game. It should be compatible with any Steam version that uses UniWS. The main content of the package are sets of GUI files (.gui), scaled for specific resolutions. The package contains GUI files for over 30 common resolutions with the following aspect ratios: 4:3, 16:10, 16:9, 21:9, and 32:9. Here is a list of the currently supported resolutions: Installation Find the gui.WxH folder matching your resolution, modify your executable using the supplied patcher, copy the GUI files to your Override/ folder. The details for this process can be found in the package README.pdf file. Read it. Follow the instructions therein. The documentation includes everything you need to know to manually patch your EXE if the patcher does not work for your version. Uninstallation Remove the GUI files, restore the original backed up version of your swkotor.exe file. IMPORTANT NOTES: This is not a resolution hack or widescreen patch, such as you get from using UniWS. You should already be successfully running the game at the resolution you are trying to get menus and UI for. Nothing in this package will give you any additional resolutions available. That is not what this does. If you are trying to get high-res menus for one of the resolutions supported by default (800x600, 1024x768, etc.) there is probably no point to using the GUI files named 'mipc*' provided by this package (mostly the in-game "HUD"), however, this scenario is untested. There are a few of the GUI files in this package you can use without modifying your executable. Here is that 'safe' list, in case you are unable to modify your executable: It gets you the main menu, some dialogs, and the in-game HUD elements. Thanks DarthParametric for testing, contributing a double-clickable thing for Windows users, and prompting me to finally figure out the needed EXE modifications. tk102 for GFF2XML and XML2GFF source code, which made it a lot easier to get this up and running. Known Issues The patcher is currently incredibly limited, making no effort to search for values, only looking at specific locations where they are in the executables I have access to. This package does not contain any higher resolution artwork. At high resolutions, menu backgrounds will be blocky, and the striped list backgrounds are unlikely to line up with list items. For numerous reasons, you will want to get a high resolution menu art package. The game's initial character selection screen does not lay out the selectable characters properly according to GUI file field values. It is useable, but not perfect. The blue hilight borders had to be removed from around the characters to maintain a clean look. The map screen is scaled up, but the map itself is not. Furthermore, the position of the map within the frame is somewhat random/poorly understood. The map, however, is completely useable, and the points of interest and player indicator are all positioned accurately relative to the map. Some of the 3D models in menus, such as on the character stats or character generation screens, display line artifacts over them. This is caused by the very low quality graphics being scaled up to provide the border overlays. Extracting the graphics as TGAs, scaling them up, and placing them into Override/ sometimes solves these problems. This package omits statussummary.gui and dialog.gui. Scaling them up cause problems. The files don't behave as expected, and it seems to not require a customized version in order for them to work as one would want. You might notice 1280x1080 in 21:9 even though it is not 21:9. It is for split-screen on 21:9 monitors. Rescaling the dialog/cut-scene letterbox (which is optional) seems to introduce occasional issues with letterbox placement, particularly when the letterbox animation happens. This may be fixed at some point in the future. There is no scaling on font size, and as far as I know no one has figured out how to do it, so users on TV/couch setups may not find the help they are looking for with this. Upgrading 1.4 to 1.5: If your resolution was not previously supported, copy new .gui files to your Override/ Upgrading 1.3 to 1.4: If you have Polish version, you can run EXE patching process If you have 32:9 display, copy new .gui files to your Override/ Upgrading 1.2 to 1.3: Copy all the .gui files to your Override/ Upgrading 1.1 to 1.2: Repeat the EXE patching process on a backup EXE if you want letterbox scaling Upgrading 1.0 to 1.1: Remove dialog.gui from your Override/ Copy 1.1 pazaakgame.gui to your Override/

This mod replaces the voice overs used for Nikto, Aqualish, Gran, and Quarren NPCs in KOTOR. In KOTOR I, Nikto, Aqualish, Gran, and Quarren NPCs use VOs that are meant for and shared by several other species. KOTOR II fixes this by adding VOs specific to these four species, so I figured hey, why not incorporate them back into the original game? The intention of this mod is to provide a stronger sense of immersion and consistency between the two games, while keeping the affected dialogue true to its intended "feel." A bonus side effect is that the aggressive Nikto VOs make the Black Vulkars seem like an actual threat instead of comic relief. Installation & Uninstallation To install this mod, run Installer.exe, select the option(s) you want, and proceed with the installation. To uninstall this mod, run the installer again, select the same option(s), and click Tools -> Uninstall Mod / Restore Backup. Compatibility Compatibility patches are included for K1CP (Queedle Fix) , KOTOR 1 Restoration, and Kainzorus Prime's K1 NPC Overhaul mod. K1R has a Nikto NPC in the Vulkar Base sublevel with Basic (English) VOs. I decided to leave this unaltered since it's restored content. Known Issues Some of the Nikto and Gran VOs don't have perfectly matching mouth animations, which is because KOTOR II is missing some LIP files. The placeholders I'm using are as close as I could find. These may be replaced in a later version. Redros's mouth doesn't move for a couple of lines of dialogue. This bug happens regardless of this mod and only if his appearance is Nikto, so I felt the bug is beyond this mod's scope. Please let me know of any other issues you find, or if you come across anything I missed! Credits Fred Tetra, Kotor Tool Fair Strides, KotOR Toolset tk102, DLG Editor & K-GFF Editor JCarter426, SithCodec NickHugi, HoloPatcher Disclaimer This mod is not supported by LucasArts, BioWare, or Obsidian Entertainment. It is for personal usage only and intends no copyright infringement. Questions, etc.? Contact me on Deadly Stream or via the unofficial KOTOR Discord if you have any questions, comments, suggestions, or the like. If you want to use this mod as a part of an external work, you must receive my permission. This mod should only be found on Deadly Stream or Nexus Mods. No user may upload it to another modding site.

When fading, a portion of the screen fades out of sync with the rest of the screen while using widescreen resolutions. This is a simple fix to solve that issue. To use: 1. Download 2. Move the file from the folder that corresponds to your display resolution into your override folder.

HD UI Menu Pack for Knights of the Old Republic v1.1 - 20180318 by ndix UR (DeadlyStream user) This modification adds high resolution UI menu textures. 2K is the base resolution. The content is redrawn vector art, no modified scale-ups here. It is focused on menu backgrounds, and includes some of the overlay components for the menus. Pure Vanilla (PV) Edition aims to provide the closest match to the original menu texture assets. This mod doesn't touch a lot of the 'extra' menu-like GUI elements yet, such as the galaxy screen, computer interfaces, pazaak, etc. It also doesn't mess with the main menu at all yet. Requirements You must be running menus at a high resolution for this to really work. At the default menu size, this mod will probably look bad. You must have KotOR High Resolution Menus or an equivalent mod installed for good results. Known Issues The original textures were for 640x480 menus. The 4x sized textures in this package would look best at 2560x1920, which nobody really uses. If your display is less than 2560px width, you may experience seams where different textures are intended to meet seamlessly. The game just isn't that good at scaling UI textures with alpha channels used for transparency. There's nothing I can really do about it. There are some sprites in the menu processes that haven't made it into the package yet. They may sometime. I've added x/y clamping to some textures that should have transparent edges over 3D backgrounds. It makes the transparent edges work well, but the diffuse edges work less well. It seems you can't have it both ways, and this is the trade off. Install / Uninstall To install, copy the files from the package Override/ folder to the Override/ folder for your KOTOR game installation. To uninstall, remove the TPC files for this package from your KOTOR game Override/ folder. Legal THIS MODIFICATION IS NOT MADE, DISTRIBUTED, OR SUPPORTED BY OBSIDIAN, OR LUCASARTS ENTERTAINMENT COMPANY LLC. ELEMENTS TM LUCASARTS ENTERTAINMENT COMPANY LLC AND/OR ITS LICENSORS. The content of this mod is free for use and reuse, with no implied warranty, you can redistribute it, in original or modified form. If you do, a credit of some kind is nice but not required.

I made this for my current playthrough to have a robe I wouldn't be embarassed to be caught wearing that also doesn't look too evil. It features: A wool mid layer, providing thermoregulation for the Jedi who wears the same clothes in every climate A bandolier to ensure your belongings aren't eaten by Cannoks Boots with lots of buckles for when you want to woo a Sith, but still in plausibly deniable Jedi colors Be "the wave of the future" in fashion and drop the files into your override folder.

A Mod for Star Wars Knights of The Old Republic Authors: N-DReW25, Effixan and Constantinople33 1.0.0 Release Date: 08.05.2022 Installation: 1) Install JC's Fashion Line I: Cloaked Hybrid Robes for K1 FIRST! (No exceptions!!!): https://deadlystream.com/files/file/1758-jcs-fashion-line-i-cloaked-hybrid-robes-for-k1/ 2) Install Effixan's Qel-Droma Robes Reskin SECOND!: https://deadlystream.com/files/file/2019-effixians-qel-droma-robes-reskin-for-jcs-cloaked-jedi-robes/ 3) Open the "For Override" folder and copy the files within to your swkotor Override folder and select the "Overwrite" option when it pops up. Description: March 11th 2021 saw the release of the Lore-Friendly Qel Droma Robes by Constantinople33 which was a 2K resolution reskin of the vanilla K1 Jedi Robe texture to make the Qel-Droma Robe item look more like the canonical Robe as worn by Qel-Droma in the Kotor Comics. I personally thought the skin looked AMAZING with its extensive detail, but at the time I used JC's Cloaked Jedi Robe mod so I took no heed to the mod as both mods were incompatible. But upon looking into JC's Cloaked Hybrid Robe mod, I realized that it would be possible to "merge" Constantinople33's work with one of JC's Cloaked Jedi Robe skin to make a "Hybrid" robe. At first, I was intending to use Salk's Qel-Droma Robe texture (which was uploaded by StellarExile) as the Cloaked texture of my Hybrid mod, but after my initial work on the Hybrid Robe the modder Effixan published his own take on a unique Qel-Droma Cloaked Robe. From what I can tell, Salk had requested Effixan to professionally make his version of Qel-Droma's Cloaked Robe using Salk's work as an inspiration... as such, after getting permission from Constantinople33 and the fact Effixan stated in his readme that users can use his Qel-Droma Robe with credit, I have merged the Lore-Friendly Qel-Droma Robe with Effixan's Qel-Droma Robes Reskin mod. Known Bugs: This mod shouldn't have bugs, but if there any please report them on Deadlystream.com Incompatibilities: Report any unknown incompatibilities to me on Deadlystream.com Permissions: Do NOT claim credit for this mod and do not use assets from this mod without my permission. To use Constantinople33's texture in your mod, please ASK HIM for permission as it is his original work! Thanks: Constantinople33: For making the original Lore-Friendly Qel-Droma Robes! Effixan: For creating his own Qel-Droma Cloaked Robe texture which was used in this mod! Salk: The one responsible for the design of the Qel-Droma Cloaked Robes! Bioware: For such an amazing game Fred Tetra: For Kotor Tool And everyone who downloads the mod! Legal: THIS MODIFICATION IS NOT SUPPORTED BY BIOWARE/OBSIDIAN ENTERTAINMENT, LUCASARTS, DISNEY OR ANY LICENSERS/SPONSORS OF THE MENTIONED COMPANIES. USE OF THIS FILE IS AT YOUR OWN RISK AND THE ABOVE-MENTIONED COMPANIES OR THE AUTHOR IS NOT RESPONSIBLE FOR ANY DAMAGE CAUSED TO YOUR COMPUTER FOR THE USAGE OF THIS FILE.

Adds all the robes the Dark Jedi wear as Disguises. --Installation-- Put all files into your override folder except the optional folder,read more there. --Usage-- Add via cheat codes --Codes-- giveitem darkjedirobe1 -Default Grey giveitem darkjedirobe2 -Female Grey giveitem darkjedirobe3 -Blue giveitem darkjedirobe4 -Red giveitem darkjedirobe5 -White

Pretty Good! Icons for KotOR 1.0 by ajdrenter Description: This is a complete set of vanilla equipment icons for high resolution UI scaled configurations. Future updates will include mod specific icons. This mod is intended to be used with "KotOR High Resolution Menus" by ndix UR. The goal of this mod is not to fix any consistency issues or design oversights of Bioware's icons, rather it is to replace them as seamlessly and accurately as possible. Installation: Just drag and drop either the tpc OR tga files to your override. I recommend the tga version for maximum compatibility, as you may want to mix and match with other mods. Credits: Darth Tomer, SpaceAlex, and ebmar for "Three-tiered Dark Jedi Robe". A couple skins from this mod were used to more closely match the vanilla icons. Bioware and Lucasarts for all original assets. Thanks to the whole community for such a wonderful wealth of content over the years. Usage: You may use this mod for any non commercial use and without contacting me as long as you give me credit for my assets.

This file is a hex-editable KOTOR executable for use in widescreen patching. The file was originally produced by FairLight, and therefore DeadlyStream offers no technical support for the file or its use.

This is a simple edit of the camera model for the workbench upgrade screen that alters some of the camera angles/positions to zoom in a bit closer to certain weapon types, most notably lightsabers, so you can get a better look at the models when running the game at higher resolutions. Mostly intended for those using modded weapons. Installation Instructions Simply drop the MDL/MDX in your Override folder. Known Issues Requires ndix UR's KOTOR High Resolution Menus mod to work as intended. Only tested at 1080p. Results may vary at other resolutions/aspect ratios. Modded weapons that are excessively large will likely go off-screen, but they probably do that already. Acknowledgements Thanks to @bead-v for MDLEdit and KOTORMax. Thanks to @ndix UR for the High Res Menus mod.

This mod will add upscaled textures for the interior of the Ebon Hawk. Except the skies, see note below. All textures are now 4x their original size. Example a 128x128 becomes 512x512, etc... I've not gone up to the 4096x4096 sizes as I don't see what that would add to this older game. Normal maps have also been redone, rerendered not just upscaled. It's still a 400% improvement on the older files. Have a look at the screenshots and; Enjoy! EDIT: Looks like I forgot to pack the tpc normalmap files, you can get these with the extra ZIP I provided. Just unpack/ copy to the override folder! Sky textures are made by the great Sithspecter get them here: => https://deadlystream.com/files/file/938-high-quality-cockpit-skyboxes/ Install these after my pack and just overwrite them when asked. Other great texture mods to improve the many monitors and screens in the Ebon Hawk by talented SithHolocron: => https://deadlystream.com/files/file/848-animated-ebon-hawk-monitors-not-including-galaxy-map/ => https://deadlystream.com/files/file/1237-more-subtle-animated-ebon-hawk-monitors-still-not-including-galaxy-map/ => https://deadlystream.com/files/file/1032-kotor1-canon-animated-galaxy-map/ => https://deadlystream.com/files/file/724-kotor1-animated-galaxy-map/ NormalMaps.7z

Adds all the armor the sith trooper wear as Disguises. -Best used with A Future Pilots Sith Soldier Texture Restoration 2.4 https://deadlystream.com/files/file/1289-sith-soldier-texture-restoration/ --Installation-- Put all files into your override folder. --Usage-- Add via cheat codes --How do i use cheat codes?-- Find and go to your game folder. Open up swkotor. ini, go under [Game Options] then add "EnableCheats=1" without quotation marks. When in game press the tilde key (` or ~) and type in codes you want to use. --Codes-- giveitem ptar_sitharmor03 -Standard giveitem ptar_sitharmor04 -Heavy (Red) giveitem ptar_sitharmor05 -Elite (White)