KOTOR 1 Community Patch 1.10.0

8 minutes ago, EveryUsernameIsTaken said:

it seems that it only modfies the male version of the file.

Yes, it is only configured to append new lines to dialog.tlk.

To properly cater to non-English languages would require separate language-specific versions (since patching existing TLK lines is currently not practical). We are open to volunteers if anyone wants to do the work required to create such a thing. It would mean translating English strings to the target language, splicing the target language versions of various voice over audio files, and translating the readme (at the very least the info.rtf for TSLPatcher).

On 1/28/2023 at 11:09 AM, EveryUsernameIsTaken said:

I use a language which has 2 dialogue.tlk files (Polish), and it seems that it only modfies the male version of the file.

I am a little confused... Is this Community Patch gonna work with polish version of the game if I play male character?

Playing a male character should work fine, since that (as I understand it) uses the default dialog.tlk, with the proviso that all the TLK strings added by K1CP are in English, so at the very least those would obviously stand out. There are also edited VO lines that will be in English as well.

This may have been reported before, but just in case it hasn't: in the Manaan underwater base, the security droid's (the one next to the room with a "whimpering locker") red energy shield cannot be disabled via the computer terminal at the beginning of the level. The cutscene where the shield shuts down plays, but once you get to the droid, its energy shield is back on.

um what's the usual time for instalation of the patch. I've had it running for 20 or so minutes and the game hasn't ask for like my directory for the files or anything it's just saying installation has started.

Dual monitors? You probably have the bug where the directory selection window is off-screen. Do this:

On 12/6/2018 at 8:57 PM, DarthParametric said:

After you click the Install Mod button, try pressing ALT + Space and then Enter, then tap the Left Arrow key repeatedly and see if the browse window appears from the edge of the screen.

Is this compatible with Kainzorus Prime's NPC Overhaul Mod?

It needs to be installed first, since it does hard overwrites of modules. That makes it incompatible with pretty much everything unless it is the very first mod installed.

17 hours ago, DarthParametric said:

It needs to be installed first, since it does hard overwrites of modules. That makes it incompatible with pretty much everything unless it is the very first mod installed.

So I need to install K1CP first and then Kain's NPC Overhaul? I was told the two mods were incompatible.

6 hours ago, JasonRyder said:

So I need to install K1CP first and then Kain's NPC Overhaul?

No, the exact opposite. As I said, NPC Overhaul does hard overwrites and is basically incompatible with any pre-installed mod/s. You must install that first over a fresh game install. Then install K1CP and then any other mods.

Does this mod restore the Iriaz on Dantooine? 

It's not a restoration mod, so no.

On 6/17/2023 at 10:07 PM, DarthParametric said:

It's not a restoration mod, so no.

Does it restore Sharina Fizark on Dantooine? I don't think it does. So I downloaded a mod that restores her. 

For some reason I get error when installing the community patch. 

It looks like the community patch doesn't play well with .mod files if they are already present in the module folder, trying get this working well enough with Black Vulkar Restoration mod which only has a mod file. I thought it would be better to put that in first then run the community patch for it to work.

[Install] 	Adding file cp_tar10_vlkpl_d.ncs to the modules\tar_m10aa.mod archive...
[Install] 	Adding file cp_tar10_vlkplud.ncs to the modules\tar_m10aa.mod archive...
[Error] 	Unhandled exception: Access violation at address 00472E02 in module 'INSTALL.exe'. Read of address 00000000 (0)

 

22 minutes ago, EmperorArt said:

It looks like the community patch doesn't play well with .mod files if they are already present in the module folder

It works perfectly fine with pre-existing MODs, assuming they are valid. All of K1CP's module-specific content is dynamically injected during the install. There are no pre-patched modules. If you have an error then either the 3rd party module is bad or your system is bad.

On 6/29/2023 at 3:21 AM, DarthParametric said:

It works perfectly fine with pre-existing MODs, assuming they are valid. All of K1CP's module-specific content is dynamically injected during the install. There are no pre-patched modules. If you have an error then either the 3rd party module is bad or your system is bad.

Yet again turns out it was none of those things, it would seem that it was probably a windows update that created some memory issues. Though I have to note, that the only thing that was impacted were installers related to TSLPatcher, every other program and installer worked fine, including games.

Very "helpful" must be essentially saying "your bad computer" lmao without any reasoning or suggestions. 

You literally confirmed it was a problem on your end, which is what I said.

On 6/30/2023 at 11:56 PM, DarthParametric said:

You literally confirmed it was a problem on your end, which is what I said.

Edit: I didn't exactly confirm other than make a probable conclusion , "computer bad" which means that the computer hardware is bad which is vague ah and turned out to be wrong, I'll keep troubleshooting the patcher TSL installer though it seems to only affect the TSLPatcher for community that i have on the system. I'll redownload it and try from a different directory.

 

Edit 2: Well I managed to move on from the initial error which was some files were not extracted using the default zip extractor (bad extraction i guess you could say).  The new error is

 [Error] Cannot open file "C:\Users\TheEm\Downloads\K1_Community_Patch_v1.9.2\tslpatchdata\m10aa.git". The system cannot find the file specified (EXT-0)

 I tried redownloading, re-extracting, extracting with different archiver apps, download the m10aa.mod file from the github repo, I can't seem to fix this issue.

 

edit 3: tried on my laptop (different computer) and the new error I just mentioned is still occurring, newly downloaded archive from here and extracted with 7zip. So this it looks to me like this new issue isn't a "bad computer" problem.

Before I installed this mod I changed the resolution within the game settings and the colour of the screen would dim. This wouldn't fix when changing the resolution back and was only fixed by exiting the game and running it again.

I installed the mod and the same thing happened. I can't wait to use the Community Patch for my first ever PC playthrough of KOTOR 1, and since I noticed this bug I thought I'd point it out so the community could fix it for a future update.

There's nothing for the Community Patch to fix. Don't change the resolution in-game. Leave it at its base setting and use the widescreen patch to edit the resolution.

So, I am literally unable to download this patch. I don't know why modifications are not made to the kotor folder, in fact a folder is downloaded to the installer folder after extracting it. I don't know if I should deactivate something before, or if when choosing the folder to install they are selected incorrectly, I hope you can answer me please

You have two conflicting statements. You say you are literally unable to download it, and then you talk about extracting something. So you literally are able to download it presumably?

Once downloaded, you need to extract it somewhere (preferably not the game folder) and run the installer.

I try to extract the latest version of this, but my anti-virus software considered the application a threat and deletes it as soon as I click on it. 

Yeah it's because of HoloPatcher being packed as a self-contained Python application. Your options: update your AV's definitions, whitelist the file/folder, submit a false-positive report, swap to a different AV.

On 2/3/2024 at 0:07, DarthParametric said:

Tienes dos declaraciones contradictorias. Dices que literalmente no puedes descargarlo y luego hablas de extraer algo. Entonces, ¿literalmente puedes descargarlo, presumiblemente?

Una vez descargado, debes extraerlo en algún lugar (preferiblemente no en la carpeta del juego) y ejecutar el instalador.

I'm sorry if I expressed myself wrong, English is not my native language and I am using a translator. I can download and extract the file, but when I run the installer and choose the game folder, it has no modifications, only a few folders are added to the folder where the installer was extracted, but the game still has the same problems as before try to install the patch. I don't know if it's something with my PC or if I'm doing something wrong, or if you just have to add some files or folders to the game, know what they are, I hope you can help me.

Edited March 3 by Gonza2332