Untold Prophecy

May 4, 2018

He's the father of Cade Skywalker, from the Legacy comic series. You know, Darth Talon and all that.

Hey Darthparametric! I spoke to you about this same mod request I while back.

Out of curiosity, do you still have the files for you Ven Zallow saber concept? That's another one I've been scouring sites for lately.

May 4, 2018

My apologies, I didn't realize I was being vauge. He's a character from the Legacy Era of Dark Horse Comics Star Wars series.

I attached a picture of the lightsaber, though I'm replying from my phone so I don't know if the picture is visible from other devices.

May 4, 2018

Would anyone be willing to make me a blue version of Kol Skywalker's lightsaber for Kotor 2?

It's one of my favorite designs, and I'd like to be able to have something reminiscent of it when I go to do a playthrough of TSL in the next couple of weeks.

November 6, 2017

Here you go, an Anakin AOTC saber for TSL:_Anakin_AOTC_Saber.7z]https://www.darthparametric.com/files/kotor/tsl/[TSL]_Anakin_AOTC_Saber.7z

Thank you so much! If you have anything else you're working on, I'll gladly give it a permanent position in my Override!

November 2, 2017

I did do an Anakin AOTC high poly hilt, but that is around 32K polys, not a practical game model. Here are a few KOTOR bits and pieces I could find.An untextured Vader ANH hilt. It could probably also be converted to an Anakin AOTC hilt without too much drama.The TOR concept/Ven Zallow hilt (very low quality):The Starkiller/Force Unleashed hilt that I could never get to work properly with MDLOps (should be fine now with MDLEdit though, a mere 9 years later):The Ki-Adi-Mundi hilt:An untextured Revan's hilt (apparently?):

These are really beautiful designs!

November 2, 2017

I was poking through my scrap heap earlier and noticed I have an ESB version that never made it past the WIP render stage, circa 2008. I can throw that one together as well if you want.

Sure, whatever you have time for!

I don't want to seem pestering at all, but I'd really appreciate that!

Do you happen to have an Anakin AOTC saber as well? I know that there's one from USM, but I was wondering if anyone else has ever done one?

November 2, 2017

I dug out my ye olde Luke ANH saber and slapped together an installer for it. Also provided a straight override for the vanilla turquoise hilt. Not Kol's perhaps, but why settle for anything less than a genuine Graflex™?_Luke_ANH_Lightsaber.7z]https://www.darthparametric.com/files/kotor/tsl/[TSL]_Luke_ANH_Lightsaber.7z

Wow! You didn't have to do that!

Lol, part of my obsession with Kol's non-graflex Graflex is that I have so many renditions of it in my Override, and it's one of the few I'm missing!

But this is also one I'm missing, so it'll soon find a home in my Override too! Thanks again!

November 2, 2017

Considering that even experienced modders can have a real pain in doing that, I wouldn't put yourself that low. MDLops can really suck sometimes.

MDLops is a pain. I wish more mods had dual compatibility.

November 1, 2017

So I posted something similar yesterday, but I decided to move the request/ideas over to here for better attention.

I have a few mod ideas for TSL that have been in my head for several years now, and I thought that I would list them out here in case anyone was interested in tackling one of the projects. Either because you want to help out a mod enthusiast who can't model nor code, or (with my original intention) give someone an idea for a mod when they have writer's block (modder's block?) with ideas. Maybe one day some of these could be incorporated into TSL.

Luke Skywalker Dark Empire Armor- https://static.comicvine.com/uploads/original/11111/111113706/5139669-1860602312-latest

Kol Skywalker's Lightsaber- https://vignette.wikia.nocookie.net/starwars/images/4/40/Cade_saber.jpg/revision/latest?cb=20100318152901

Anakin Skywalker AOTC Lightsaber- https://vignette3.wikia.nocookie.net/starwars/images/d/d4/Anakin_Skywalkers_first_lightsaber_-_SW_Card_Trader.png/revision/latest?cb=20160709211740
(I know that this saber is included in USM, but because USM is incompatible with TSLRCM it makes it difficult to play with said saber. Not to mention that model for that mod is somewhat outdated now.)

SWTOR Starting Lightsaber/Gladius- http://jedi.well-of-souls.com/images/ancient_lightsaber.jpg

Brown Hair and Beard re-skin of PMHC06- https://staticdelivery.nexusmods.com/mods/198/images/79331_1.jpg
(I'm aware that a mod like this already exists, but I'm specifically looking for something that does the exact same thing only with brown hair and beard)

HD Bastila Head, TSL- https://vignette.wikia.nocookie.net/starwars/images/d/d9/Bastila_render.jpg/revision/latest?cb=20091106042633
(This has been done many times for Kotor 1, but I've never found one for TSL. It's a shame too, because there are a lot of mods that use the Bastila head for the PC and it would be cool to see those textures updated like those for other PC heads.)

I hope someone likes some of the ideas on here! I would love to see any of these show up on the Download page one day.

I should note that the most advanced modding I can do is using KSE or porting basic models from Kotor 1 to Kotor 2, so my ability to create any of these ideas is sadly out of the question...
I'm just an amateur and an enthusiast!

November 1, 2017

The only version of MDLops that works with lightsabers is the 0.5. And I understand your wish to see some hilt models, I am a lightsaber hilt freak myself and use 25 different models in K1 and 50 in TSL and I still wish to see a mod with Ezra first lightsaber in it.

I think I'm running 0.5, but I'm not sure. Usually I avoid using it because it takes so long for me to get the textures set and the model working.
I hear you though, I really wish that there were more variety of lightsaber mods out there. I have a mix and match of stuff that I've pulled off of Filefront before it went down, and also stuff from here.
Right now Armor mods and HAD retextures seem to be what's in on the site, and I have no complaints about that at all! I just wish we had a TSLRCM compatible Ultimate Saber Mod, or a Legacy era saber pack.
But I can't complain too much, the quality of work coming out now is beyond professional. That's why I continue to support the game!

MDLEdit will handle sabers just fine. All it takes is a simple decompile and recompile to the other game version. There's no need for any of the complexities with the old MDLOps replacer routine any more.

Thank you! I'll have to try this out when I go to do another TSL play through after my semester ends.

November 1, 2017

If you know how to use MDLops, there is no such thing as K1 or TSL exclusive. I have the same lightsaber models for both games.

You know, I've used it before to port over the Prequel Lightsaber pack from KotOR to TSL, but it usually turns into a repeat hassle with the model coming over but the textures failing to render. I don't know if it's because I'm using an older version of MDLops or if it's just because I'm an amateur.

Other than the blasters though, most of that list is stuff I haven't seen.

I'd really like to see a Kol Skywalker hilt though... And it's NOT a Graflex knockoff! xD I mean, it is, but you can't substitute something with the Graflex, it's not authentic then! Lol

October 31, 2017

Inyri Forge did a Bryar Pistol for K1 - http://deadlystream.com/forum/files/file/601-bryar-pistol-and-bryar-rifle-by-inyri-forge/I made a DL-44 aeons ago which was included as part of the KOTOR Weaponry Improvement Project - https://www.nexusmods.com/kotor/mods/134 (although it looks pretty terrible, blech)The various Clonetrooper mods include a DC-15. For example http://deadlystream.com/forum/files/file/392-k1-clone-wars-armors/ and http://deadlystream.com/forum/files/file/416-tsl-clone-wars-armors/Kol Skywalker's saber is just a poor man's Graflex knockoff. You can get by with an ANH/ESB Luke or ROTS Anakin hilt. I made a Luke ANH hilt at one point, but it doesn't seem I ever released it. Oldflash did an Anakin ROTS hilt - https://www.nexusmods.com/kotor/mods/220/

I'm actually familiar with some of these works, now that you mention it. Although I think most of them are Kotor I exclusive.

I was hoping if some of these had already been done or were inspired from here they'd turn up in TSL.

October 31, 2017

How would I go about having it moved then?

To be fair, I should have posted in Requests to begin with.

October 31, 2017

Hello everyone! New to the forums, but I've been on the site downloading countless works over the years.

I've had some mod ideas for KotOR II for years now, but I lack the time and skill to produce something along the lines of quality I've seen from the artists on here. I've decided to make this post for any creators looking for something to make, but aren't sure what they want to do. If anyone wants to use some of these ideas, then please do it! No need to credit me or ask me anything, I just want to shoot out some ideas that I've had for years in hopes of maybe seeing them come up on the downloads page!

Without further ado, here are some ideas I have had for mods for the last 5 years:

Armor Ideas:

Luke Skywalker's Dark Empire Armor- https://i.pinimg.com/originals/ae/d3/e4/aed3e40088585fb73a3ac2f3f454b177.jpg

Darth Krayt's Vong Coral Armor- https://i.pinimg.com/736x/6d/94/31/6d943101faff9751a4b7316d3f106e0b--darth-krayt-silence.jpg

Jedi Master's Blindfold- Similar to that which Rahm Kota wears in The Force Unleashed. https://vignette.wikia.nocookie.net/starwars/images/4/4b/Blind_Kota.jpg/revision/latest?cb=20090709061639

Blaster Ideas:

DL-44 Heavy Blaster Pistol- https://cdnb.artstation.com/p/assets/images/images/004/821/137/large/matt-young-dl44-01.jpg?1486512974

DC-15s Blaster Rifle- https://vignette.wikia.nocookie.net/starwars/images/b/bb/Dva0516.jpg/revision/latest/scale-to-width-down/350?cb=20080525151615

Bryar Blaster Pistol- https://vignette1.wikia.nocookie.net/battlefront/images/7/7b/Erik-rading-swbf-erikrading-bryarpistol-resized.jpg/revision/latest?cb=20170103145331

Tenloss Disruptor Rifle- http://www.jediknight.net/images/jediacademy/weap_04.jpg

Lightsaber Hilts:

Kol Skywalker's lightsaber- https://vignette.wikia.nocookie.net/starwars/images/4/40/Cade_saber.jpg/revision/latest/scale-to-width-down/350?cb=20100318152901