Search the Community
Showing results for tags 'speeders'.
Found 8 results
-
Version 1.0.0
18 downloads
Main idea Has the time it takes to get from one end of Ahto City to the other ever seemed too long ? Has it ever annoyed you ? If so, this mod is exactly what you need. It adds a custom speeder, using LoneWanderer’s modder resource, to every part of the city, allowing you to traverse it in seconds. This mod is more an add-on to Capitaine Spoque’s Taris Rapid Transit System than a standalone one. Thus, to get the best game experience and as I used some of his sound files, you will first have to download his mod. You can find it here : https://www.nexusmods.com/kotor/mods/1666 However, if for some reason you don’t want it, you have 2 options : 1) You won’t have power on and off sounds for the speeder, even though it will still be enjoyable, don’t worry. 2) You download Capitaine Spoque’s mod but you do not install it on your game installation. You will instead go to his tslpatchdata folder, take the In.wav and out.wav files and put them in your streamwaves folder. Then you will have the power on and off sounds. I recommend copying these 2 files somewhere near my mod's location in case you need to reinstall it. After having done that, you can delete the rest of his mod from your computer. See Installation section for when to follow these steps. To give more realism to my mod, and in order to having a better insertion into the game, I added a new line to the security selkath who opens you the door to the city, as well as some directly on the speeders. You will have to load a save before entering Ahto City. Starting a game where you are in the docking bay module (and in which you’ve never been further into the city) should be good. Another important advice : if you haven't already, you should really consider downloading and installing (before mine) these 2 essential mods for Manaan, for it to look like in the screenshots (especially the blue ground that goes so well with the speeders imo) : 1) Manaan Complete Overhaul by Jorak Uln (animated and better textures) : 2) High Quality Skyboxes by Kexikus (better skies for every planet, including Manaan): Installation 1) Make sure you have the required mods, (especially Capitaine Spoque's unless you don't want to use it), installed 2) Download mine and unzip it (small tip if you’re struggling : use 7-Zip) 3) Run the installer and follow the instructions given by it 4) This is where you will do the option 2 steps given in the Main section if you really don’t want to use Capitaine Spoque’s mod. 5) You’re good to go. If you enjoy the mod (or even if you didn't, as long as it's constructive), feel free to leave a review. Doesn’t cost much and is really appreciated. To uninstall this mod, you will have to do what HoloPatcher put in the "backup" folder when you downloaded the mod (taking MOD and 2DA backup files, putting them back in your game installation, and removing my mod's files from Override and streamwaves). You can also delete the In and out .wav files from streamwaves if you didn't use Capitaine Spoque's mod. Compatibility My mod is fully compatible with K1CP, as it is now (in 2025) the main reference for modders. It probably won't be compatible with K1R because it adds a row to placeables.2da which has a limit of rows, and from what I've understood K1R uses all of them. Apart from that, it will basically be compatible with everything as long as your placeable.2da has less than 255 rows filled (which should always be the case because apart from K1R, no mod adds as many rows to this file as it would require to reach the limit). furthermore, as I used HoloPatcher to modify the .2da and .mod files directly in your game installation, and also named my files with the most customized names I could, you shouldn’t have any conflict with mods you already have installed. However, if for some reason you encounter any issue, feel free to report to me. Thanks 1) SAO, who generously gave me a base for the mod, that I just had to improve and make compatible with HoloPatcher. 2) Capitaine Spoque for his brilliant Taris Rapid Transit System, as well as the help he brought. Thanks for teaching me how to modify MOD and GIT files, and how to set up the Patcher properly. 3) LoneWanderer for his awesome speeder port from SWTOR 4) All the amazing people who made the awesome tools I used for this mod : Holocron Toolset, Kotor Scripting Tool, ChangeEdit and HoloPatcher. 5) The KOTOR and, more precisely, DeadlyStream community (even more precisely, those who download the mod 😁), as the game is still alive thanks to all of you. Permissions If you need to know more, please contact me on DeadlyStream or Discord KOTOR / DeadlyStream server : “The_Chaser_One”. -
View File Manaan Fast Travel system Main idea Has the time it takes to get from one end of Ahto City to the other ever seemed too long ? Has it ever annoyed you ? If so, this mod is exactly what you need. It adds a custom speeder, using LoneWanderer’s modder resource, to every part of the city, allowing you to traverse it in seconds. This mod is more an add-on to Capitaine Spoque’s Taris Rapid Transit System than a standalone one. Thus, to get the best game experience and as I used some of his sound files, you will first have to download his mod. You can find it here : https://www.nexusmods.com/kotor/mods/1666 However, if for some reason you don’t want it, you have 2 options : 1) You won’t have power on and off sounds for the speeder, even though it will still be enjoyable, don’t worry. 2) You download Capitaine Spoque’s mod but you do not install it on your game installation. You will instead go to his tslpatchdata folder, take the In.wav and out.wav files and put them in your streamwaves folder. Then you will have the power on and off sounds. I recommend copying these 2 files somewhere near my mod's location in case you need to reinstall it. After having done that, you can delete the rest of his mod from your computer. See Installation section for when to follow these steps. To give more realism to my mod, and in order to having a better insertion into the game, I added a new line to the security selkath who opens you the door to the city, as well as some directly on the speeders. You will have to load a save before entering Ahto City. Starting a game where you are in the docking bay module (and in which you’ve never been further into the city) should be good. Another important advice : if you haven't already, you should really consider downloading and installing (before mine) these 2 essential mods for Manaan, for it to look like in the screenshots (especially the blue ground that goes so well with the speeders imo) : 1) Manaan Complete Overhaul by Jorak Uln (animated and better textures) : 2) High Quality Skyboxes by Kexikus (better skies for every planet, including Manaan): Installation 1) Make sure you have the required mods, (especially Capitaine Spoque's unless you don't want to use it), installed 2) Download mine and unzip it (small tip if you’re struggling : use 7-Zip) 3) Run the installer and follow the instructions given by it 4) This is where you will do the option 2 steps given in the Main section if you really don’t want to use Capitaine Spoque’s mod. 5) You’re good to go. If you enjoy the mod (or even if you didn't, as long as it's constructive), feel free to leave a review. Doesn’t cost much and is really appreciated. To uninstall this mod, you will have to do what HoloPatcher put in the "backup" folder when you downloaded the mod (taking MOD and 2DA backup files, putting them back in your game installation, and removing my mod's files from Override and streamwaves). You can also delete the In and out .wav files from streamwaves if you didn't use Capitaine Spoque's mod. Compatibility My mod is fully compatible with K1CP, as it is now (in 2025) the main reference for modders. It probably won't be compatible with K1R because it adds a row to placeables.2da which has a limit of rows, and from what I've understood K1R uses all of them. Apart from that, it will basically be compatible with everything as long as your placeable.2da has less than 255 rows filled (which should always be the case because apart from K1R, no mod adds as many rows to this file as it would require to reach the limit). furthermore, as I used HoloPatcher to modify the .2da and .mod files directly in your game installation, and also named my files with the most customized names I could, you shouldn’t have any conflict with mods you already have installed. However, if for some reason you encounter any issue, feel free to report to me. Thanks 1) SAO, who generously gave me a base for the mod, that I just had to improve and make compatible with HoloPatcher. 2) Capitaine Spoque for his brilliant Taris Rapid Transit System, as well as the help he brought. Thanks for teaching me how to modify MOD and GIT files, and how to set up the Patcher properly. 3) LoneWanderer for his awesome speeder port from SWTOR 4) All the amazing people who made the awesome tools I used for this mod : Holocron Toolset, Kotor Scripting Tool, ChangeEdit and HoloPatcher. 5) The KOTOR and, more precisely, DeadlyStream community (even more precisely, those who download the mod 😁), as the game is still alive thanks to all of you. Permissions If you need to know more, please contact me on DeadlyStream or Discord KOTOR / DeadlyStream server : “The_Chaser_One”. Submitter The_Chaser_One Submitted 05/09/2025 Category Mods K1R Compatible No
-
Version 1.0.0
218 downloads
NOTE: The fixes provided in this mod have since been wrapped up into a larger mod, Repair Your Airspeeder... Again!, which also includes new and improved camera angles to boot. Download this mod if you do not want the other changes provided by that mod. If you have ever fixed up your own speeder on Nar Shaddaa, you know how much work has to go into it. You might also notice that whoever takes your speeder to the docks not only crashes it through the railing but also parks it halfway onto the catwalk, missing the opening space for speeders almost entirely. How embarrassing! Breathe easy, there's a fix: install this mod and the Force will be with your parking job. You should install TSLRCM prior to installing this mod. For an existing game, use a save file made before visiting the docks for the first time (this mod won't affect save files made any later). Installation: First download the 7z file and extract to somewhere on your computer. 7z files can be extracted using Archive Utility for macOS, or with free programs like PeaZip on Windows and Linux. Users have two options for installation: you can run the installer in the "Installer" folder (macOS and Linux users will need Wine to run .exe files) or open the "Manual Installation" folder and do it yourself, following the instructions in ReadMe.txt. Either method is easily done, but the installer maximizes compatibility with other mods. Modifications: -wp_airtaxi location and orientation in 303nar.git (via running the installer) -sw_startloc004 location in 303nar.git (via running the installer) -303nar.mod replaced (manual installation) Compatibility: Users should expect full compatibility with any other mods, so long as they make no modifications to the data listed above according to their install method. Running the installer maximizes compatibility, by modifying the necessary data in your 303nar.mod rather than replacing it wholesale. Requires TSLRCM 1.8.3 or higher. Acknowledgments: Thanks to Fred Tetra for making file extraction easy with KotORTool, and to Stoffe and Fair Strides for easy .mod extraction with ERFEdit 0.5, and of course for TSLPatcher. This modification is not supported by Obsidian Eentertainment, Lucasarts, Disney or any licensers/sponsors thereof. Use of this modification is at your own risk and neither the aforementioned companies nor the author may be held responsible for any damages caused to your computer via this modification's usage. -
Version 1.0.0
1,383 downloads
Spoiler-Free Description: Nobody likes to see a group project go to waste! This mod allows you to repair your speeder once and for all upon completing the Nar Shaddaa main story, and restores some of Obsidian's original game dialogue along the way. Rather than being told that the speeder has been sabotaged beyond your ability to repair, you will be told specifically which part that you installed needs to be replaced, and given an opportunity to find it at a location made available towards the end of the Nar Shaddaa main story (for the exact location, see step #8 of the full walkthrough provided below or attached images). This mod restores original dialogue for certain party members, and the opportunity to gain/lose influence with them as you see fit. You should install TSLRCM prior to installing this mod. For an existing game, use a save file made before visiting Nar Shaddaa for the first time (this mod won't affect any areas of the game you have already been to). Full Description (Contains Spoilers): Installation: Download the 7z file and extract to somewhere on your computer that is easy to find. 7z files can be extracted with Archive Utility on macOS, or with free programs like PeaZip on Windows and Linux. For full compatibility and your own personal convenience, this mod comes with an installer which comes highly recommended. Simply run the installer, and direct it to your TSLRCM installation. For Steam installations, direct the installer to "Steam\steamapps\workshop\content\208580\485537937", and not the main game folder with the executable. The installer is an executable file that can be run natively on Windows or with free programs like Wine on other platforms. If for whatever reason you have trouble with the installer, open the "Manual Installation" folder and follow the instructions of the ReadMe file inside. Uninstallation: Follow the instructions within the ReadMe pertaining to your installation method. Compatibility: Users should expect full compatibility with any other mods, so long as they make no modifications to any airspeeder-related files or affect the new airspeeder cameras for other purposes (automatic installation) or replace the included files installed manually. Requires TSLRCM 1.8.3 or higher. Modifications (Automatic Installation): Modifications (Manual Installation): Full Walkthrough (Contains Spoilers): Acknowledgments: Big thanks to Fred Tetra for KotORTool and Cortisol for the Holocron Toolset for making file extraction, module editing, and .mod file building easy, Fair Strides for the DLG Editor, JdNoa and Dashus for simple script decompiling with DeNCS, Blue for the KotOR Script Editor, and to Stoffe and Fair Strides for easy .mod extraction with ERFEdit, and for making inter-mod compatibility infinitely more feasible with TSLPatcher. It really does take a village to make one speeder fly. Have a bug to report? Visit this mod's "Get Support" page and let me know! This modification is not supported by Obsidian Entertainment, Lucasarts, Disney or any licensers/sponsors thereof. Use of this modification is at your own risk and neither the aforementioned companies nor the author may be held responsible for any damages caused to your computer via this modification's usage. -
View File Repair Your Airspeeder... Again! Spoiler-Free Description: Nobody likes to see a group project go to waste! This mod allows you to repair your speeder once and for all upon completing the Nar Shaddaa main story, and restores some of Obsidian's original game dialogue along the way. Rather than being told that the speeder has been sabotaged beyond your ability to repair, you will be told specifically which part that you installed needs to be replaced, and given an opportunity to find it at a location made available towards the end of the Nar Shaddaa main story (for the exact location, see step #8 of the full walkthrough provided below or attached images). This mod restores original dialogue for certain party members, and the opportunity to gain/lose influence with them as you see fit. You should install TSLRCM prior to installing this mod. For an existing game, use a save file made before visiting Nar Shaddaa for the first time (this mod won't affect any areas of the game you have already been to). Full Description (Contains Spoilers): Installation: Download the 7z file and extract to somewhere on your computer that is easy to find. 7z files can be extracted with Archive Utility on macOS, or with free programs like PeaZip on Windows and Linux. For full compatibility and your own personal convenience, this mod comes with an installer which comes highly recommended. Simply run the installer, and direct it to your TSLRCM installation. For Steam installations, direct the installer to "Steam\steamapps\workshop\content\208580\485537937", and not the main game folder with the executable. The installer is an executable file that can be run natively on Windows or with free programs like Wine on other platforms. If for whatever reason you have trouble with the installer, open the "Manual Installation" folder and follow the instructions of the ReadMe file inside. Uninstallation: Follow the instructions within the ReadMe pertaining to your installation method. Compatibility: Users should expect full compatibility with any other mods, so long as they make no modifications to any airspeeder-related files or affect the new airspeeder cameras for other purposes (automatic installation) or replace the included files installed manually. Requires TSLRCM 1.8.3 or higher. Modifications (Automatic Installation): Modifications (Manual Installation): Full Walkthrough (Contains Spoilers): Acknowledgments: Big thanks to Fred Tetra for KotORTool and Cortisol for the Holocron Toolset for making file extraction, module editing, and .mod file building easy, Fair Strides for the DLG Editor, JdNoa and Dashus for simple script decompiling with DeNCS, Blue for the KotOR Script Editor, and to Stoffe and Fair Strides for easy .mod extraction with ERFEdit, and for making inter-mod compatibility infinitely more feasible with TSLPatcher. It really does take a village to make one speeder fly. Have a bug to report? Visit this mod's "Get Support" page and let me know! This modification is not supported by Obsidian Entertainment, Lucasarts, Disney or any licensers/sponsors thereof. Use of this modification is at your own risk and neither the aforementioned companies nor the author may be held responsible for any damages caused to your computer via this modification's usage. Submitter PapaZinos Submitted 02/19/2022 Category Mods TSLRCM Compatible Yes
-
View File Don't Let Kreia Fly Your Speeder! NOTE: The fixes provided in this mod have since been wrapped up into a larger mod, Repair Your Airspeeder... Again!, which also includes new and improved camera angles to boot. Download this mod if you do not want the other changes provided by that mod. If you have ever fixed up your own speeder on Nar Shaddaa, you know how much work has to go into it. You might also notice that whoever takes your speeder to the docks not only crashes it through the railing but also parks it halfway onto the catwalk, missing the opening space for speeders almost entirely. How embarrassing! Breathe easy, there's a fix: install this mod and the Force will be with your parking job. You should install TSLRCM prior to installing this mod. For an existing game, use a save file made before visiting the docks for the first time (this mod won't affect save files made any later). Installation: First download the 7z file and extract to somewhere on your computer. 7z files can be extracted using Archive Utility for macOS, or with free programs like PeaZip on Windows and Linux. Users have two options for installation: you can run the installer in the "Installer" folder (macOS and Linux users will need Wine to run .exe files) or open the "Manual Installation" folder and do it yourself, following the instructions in ReadMe.txt. Either method is easily done, but the installer maximizes compatibility with other mods. Modifications: -wp_airtaxi location and orientation in 303nar.git (via running the installer) -sw_startloc004 location in 303nar.git (via running the installer) -303nar.mod replaced (manual installation) Compatibility: Users should expect full compatibility with any other mods, so long as they make no modifications to the data listed above according to their install method. Running the installer maximizes compatibility, by modifying the necessary data in your 303nar.mod rather than replacing it wholesale. Requires TSLRCM 1.8.3 or higher. Acknowledgments: Thanks to Fred Tetra for making file extraction easy with KotORTool, and to Stoffe and Fair Strides for easy .mod extraction with ERFEdit 0.5, and of course for TSLPatcher. This modification is not supported by Obsidian Eentertainment, Lucasarts, Disney or any licensers/sponsors thereof. Use of this modification is at your own risk and neither the aforementioned companies nor the author may be held responsible for any damages caused to your computer via this modification's usage. Submitter PapaZinos Submitted 02/01/2022 Category Mods TSLRCM Compatible Yes
-
Version 1.0.1
724 downloads
INTRODUCTION At first I just wanted improve the aspect of the dashboard of the Bikes and Speeders. Working with the project I saw an ideal place in the image and thought that It'd be funny add a singular feature to the Speeders that recalls one of the most known cars seen in TV. Here it is. NOTE: There is still another image file (the same image that the Swoop in the Ebon Hawk but with a different file name) that I haven't modified yet and I don't know where is found. The ones modified here are the seen for the first time in Taris and Dantooine. (BTW, the "junk" bikes are not modified, it's just ...junk). INSTALLATION Unzip with 7z the downloaded file. Each vehicle has its own folder. Just copy/paste (or drag and drop) the files from the desired folder(s)/vehicle(s) to your 'KotOR\Override' folder. The files of the "After Before" and "Result" folders are not needed, they're only for to show the results. UNINSTALL Simply remove the files from your Override folder. ----------------------------------------------------- BUGS If you don't see David Hasselhoff jumping into a Speeder, nothing to worry about. ------------------------------------------------------ PERMISSIONS It's expressly forbidden upload this MOD or any part at anywhere. If I want to see it over there I can upload it myself. ------------------------------------------------------ THANKS To Deadly Stream (Oh, well... alright, alright... to the Knight Rider as well) ------------------------------------------------------ LEGAL This MOD is provided as-is and is not supported by Bioware, Obsidian, Lucas Arts or Disney. Use this file at your own risk. Neither the author nor the companies mentioned above are responsible for any damage caused to your computer for the usage of this file. -
View File (KotOR 1) Speeders "Kitt" style INTRODUCTION At first I just wanted improve the aspect of the dashboard of the Bikes and Speeders. Working with the project I saw an ideal place in the image and thought that It'd be funny add a singular feature to the Speeders that recalls one of the most known cars seen in TV. Here it is. NOTE: There is still another image file (the same image that the Swoop in the Ebon Hawk but with a different file name) that I haven't modified yet and I don't know where is found. The ones modified here are the seen for the first time in Taris and Dantooine. (BTW, the "junk" bikes are not modified, it's just ...junk). INSTALLATION Unzip with 7z the downloaded file. Each vehicle has its own folder. Just copy/paste (or drag and drop) the files from the desired folder(s)/vehicle(s) to your 'KotOR\Override' folder. The files of the "After Before" and "Result" folders are not needed, they're only for to show the results. UNINSTALL Simply remove the files from your Override folder. ----------------------------------------------------- BUGS If you don't see David Hasselhoff jumping into a Speeder, nothing to worry about. ------------------------------------------------------ PERMISSIONS It's expressly forbidden upload this MOD or any part at anywhere. If I want to see it over there I can upload it myself. ------------------------------------------------------ THANKS To Deadly Stream (Oh, well... alright, alright... to the Knight Rider as well) ------------------------------------------------------ LEGAL This MOD is provided as-is and is not supported by Bioware, Obsidian, Lucas Arts or Disney. Use this file at your own risk. Neither the author nor the companies mentioned above are responsible for any damage caused to your computer for the usage of this file. Submitter Obi Wan Pere Submitted 04/06/2021 Category Mods K1R Compatible Yes
