Leaderboard

View File Yavin Station Hangar In the vanilla game, Yavin Station is the only location that does not have a proper hangar where the player can walk to and from the Ebon Hawk. This mod adds one that generally matches the original landing and takeoff cutscenes, although I have taken a few artistic liberties. You may notice that, as with the original cutscenes, it looks remarkably similar to the Ahto City hangar on Manaan. I can only assume that the same architect worked on both projects. The hangar comes in two variants: with and without a visible forcefield effect over the hangar entrance. By default, the forcefield is invisible. To change between the visible and invisible forcefields, see the INSTALLATION instructions below. Aside from adding the new hangar, I have also made a few additional edits to the station: - Changed the stars to use a different, less-repetitive vanilla star texture. - Fixed some questionable geometry at the main observation window. - Edited the walkmesh by the observation window to correct a glitch where the player could teleport into space, originally documented by the KOTOR 1 Community Patch (K1CP). (This mod's walkmesh fixes were made from scratch and do not reuse any K1CP material.) - Added a proper load screen for the station. (New for version 1.4) - Added corridor geometry behind the various locked doors, in place of the original 2D backdrop. (New for version 1.4) IMPORTANT: To experience the new hangar, you will need a save from before visiting Yavin Station for the first time. ALSO IMPORTANT: If you are upgrading from version 1.3 or earlier, a new save is also recommended to avoid issues with the lighting on the new airlock doors. Thank you for downloading, and I hope you enjoy this mod! ------------------------------------------------------------------- INSTALLATION Run INSTALL.exe, and follow the prompts. If you have other mods installed, it is normal to see a warning that liv_m99aa.mod already exists and has been skipped. If you are using "High Quality Cockpit Skyboxes" by Sithspecter, see below for additional instructions. By default, the forcefield at the hangar entrance is invisible. To add a visible forcefield effect, run INSTALL.exe again after finishing the main installation, and select "Optional: Add Visible Forcefield". If you have previously installed version 1.3 or earlier of this mod, you can upgrade by installing directly over the old version. Note, however, that you may need to reinstall any other mods which affect Yavin Station (specifically, any mods that edit m50aa.git). Version 1.4 changes the appearance of the added airlock doors so that they look less like the Sith base doors. If you prefer the appearance from version 1.0, copy the files in the folder "Option - Alternate Airlock Door (v1_0)" into Override. ------------------------------------------------------------------- COMPATIBILITY This mod is incompatible with other mods that edit the area geometry of Yavin Station. Reskins are technically compatible, but depending on how drastic they are, they might look strange with a few new textures from this mod. If you are using a reskin of the Ebon Hawk's exterior, see the instructions below. This mod is compatible with the Kotor 1 Community Patch (K1CP). It has not been tested with the KOTOR 1 Restoration (K1R) or the K1 Yavin IV Planet Mod, but I do not expect any significant compatibility issues. For best results, install this mod after K1CP or K1R and before any other mods that alter Yavin Station. If you are using any mods that change the station's load screen (i.e. "Loadscreens in Color" by Sithspecter), install them after this one. If they use .tga files, you will need to delete this mod's version of "load_liv_m99aa.tpc" from Override manually. ------------------------------------------------------------------- HIGH QUALITY COCKPIT SKYBOXES If you are using "High Quality Cockpit Skyboxes" by Sithspecter (which I highly recommend), I have included compatible skybox textures matching my new hangar. After installing the cockpit skyboxes, perform the following steps: 1. Open the folder "HQ Cockpit Skybox Textures" from this mod. 2. Copy the TPC files corresponding to the desired quality into your Override folder. 3. If present, delete the following files from Override: - ebo_yab.tga - ebo_yaf.tga - ebo_yal.tga - ebo_yar.tga - ebo_yat.tga If you are using the alternate airlock door option, also copy the appropriate version of "ebo_yaf.tpc" from the "Alternate Airlock Door" folder into Override, overwriting if asked. "High Quality Cockpit Skyboxes" may be found at https://deadlystream.com/files/file/938-high-quality-cockpit-skyboxes/ ------------------------------------------------------------------- EBON HAWK RESKINS To use a reskin of the Ebon Hawk's exterior with the new hangar, perform the following steps: 1. Make extra copies of "LSF_EHawk01.tga" and "LSF_EHawk01.txi" (if present) from the reskin, and rename them as "yvh_ehawk.tga" and "yvh_ehawk.txi", respectively. 2. Open the new "yvh_ehawk.txi" with a text editor, and change the entry after "envmaptexture" or "bumpyshinytexture" to "CM_WK_YAVHGR". 3. Copy both files into your Override folder. 4. Delete "yvh_ehawk.tpc" from your Override folder. ------------------------------------------------------------------- CREDITS MDLedit and KOTORmax by bead-v KotorBlender by seedhartha tpcview and tga2tpc by ndix UR NWNSSCOMP by Torlack, stoffe, and tk102 DeNCS by JdNoa and Dashus K-GFF by tk102 TSL Patcher by stoffe and Fair Strides ERFEdit by stoffe and Fair Strides Kotor Tool by Fred Tetra New textures and models were based on existing KOTOR material by Bioware. Camera angle for the load screen was inspired by "Loadscreens in Color" by Sithspecter (https://deadlystream.com/files/file/916-loadscreens-in-color/). Special thanks to: - DarthParametric for suggesting the visible forcefield effect, providing an example from K1CP, and providing feedback on the result. Also for providing feedback on my new corridor extensions for version 1.4. - muitafruita for reporting that the Ebon Hawk was missing its venting sound. - Thor110 for encouraging me to create a new door texture that looks less like a knockoff of the Sith base doors. ------------------------------------------------------------------- VERSION HISTORY 1.0 - Initial Release 1.1 - Added an option for a visible forcefield effect 1.2 - Added particle emitters at the ends of the visible forcefield 1.3 - Fixed the sound effect of the Ebon Hawk venting in the hangar 1.4 - Created a new texture for the airlock doors - Added a new load screen for Yavin Station - Added corridor geometry behind the various locked doors - Edited airlock door frames to improve seal - Revised particle emitter settings and UV mapping for the visible forcefield option - Consolidated and rearranged lightmaps - Made various minor walkmesh and model improvements - Edited module .vis file to optimize performance - Added scripting code to prevent party members from being accidentally locked outside the airlock ------------------------------------------------------------------- DISCLAIMER AND PERMISSIONS This modification is provided as-is and is not supported by Disney, Lucasarts, or Bioware. Use at your own risk. The author shall not be held responsible for damage to your game installation, computer, or saved games resulting from the use of this mod. This mod shall not be reposted, in whole or in part, on any sites other than Deadly Stream without the author's permission. Assets from this mod shall not be redistributed in other modifications without the author's permission. Submitter WildKarrde Submitted 05/07/2022 Category Mods K1R Compatible Yes  

Which one, PartySwap?

View File Qel-Droma Hybrid Robes for JC's Cloaked Hybrid Robes A Mod for Star Wars Knights of The Old Republic Authors: N-DReW25, Effixan and Constantinople33 1.0.0 Release Date: 08.05.2022 Installation: 1) Install JC's Fashion Line I: Cloaked Hybrid Robes for K1 FIRST! (No exceptions!!!): https://deadlystream.com/files/file/1758-jcs-fashion-line-i-cloaked-hybrid-robes-for-k1/ 2) Install Effixan's Qel-Droma Robes Reskin SECOND!: https://deadlystream.com/files/file/2019-effixians-qel-droma-robes-reskin-for-jcs-cloaked-jedi-robes/ 3) Open the "For Override" folder and copy the files within to your swkotor Override folder and select the "Overwrite" option when it pops up. Description: March 11th 2021 saw the release of the Lore-Friendly Qel Droma Robes by Constantinople33 which was a 2K resolution reskin of the vanilla K1 Jedi Robe texture to make the Qel-Droma Robe item look more like the canonical Robe as worn by Qel-Droma in the Kotor Comics. I personally thought the skin looked AMAZING with its extensive detail, but at the time I used JC's Cloaked Jedi Robe mod so I took no heed to the mod as both mods were incompatible. But upon looking into JC's Cloaked Hybrid Robe mod, I realized that it would be possible to "merge" Constantinople33's work with one of JC's Cloaked Jedi Robe skin to make a "Hybrid" robe. At first, I was intending to use Salk's Qel-Droma Robe texture (which was uploaded by StellarExile) as the Cloaked texture of my Hybrid mod, but after my initial work on the Hybrid Robe the modder Effixan published his own take on a unique Qel-Droma Cloaked Robe. From what I can tell, Salk had requested Effixan to professionally make his version of Qel-Droma's Cloaked Robe using Salk's work as an inspiration... as such, after getting permission from Constantinople33 and the fact Effixan stated in his readme that users can use his Qel-Droma Robe with credit, I have merged the Lore-Friendly Qel-Droma Robe with Effixan's Qel-Droma Robes Reskin mod. Known Bugs: This mod shouldn't have bugs, but if there any please report them on Deadlystream.com Incompatibilities: Report any unknown incompatibilities to me on Deadlystream.com Permissions: Do NOT claim credit for this mod and do not use assets from this mod without my permission. To use Constantinople33's texture in your mod, please ASK HIM for permission as it is his original work! Thanks: Constantinople33: For making the original Lore-Friendly Qel-Droma Robes! Effixan: For creating his own Qel-Droma Cloaked Robe texture which was used in this mod! Salk: The one responsible for the design of the Qel-Droma Cloaked Robes! Bioware: For such an amazing game Fred Tetra: For Kotor Tool And everyone who downloads the mod! Legal: THIS MODIFICATION IS NOT SUPPORTED BY BIOWARE/OBSIDIAN ENTERTAINMENT, LUCASARTS, DISNEY OR ANY LICENSERS/SPONSORS OF THE MENTIONED COMPANIES. USE OF THIS FILE IS AT YOUR OWN RISK AND THE ABOVE-MENTIONED COMPANIES OR THE AUTHOR IS NOT RESPONSIBLE FOR ANY DAMAGE CAUSED TO YOUR COMPUTER FOR THE USAGE OF THIS FILE. Submitter N-DReW25 Submitted 05/08/2022 Category Skins K1R Compatible Yes  

Salk, Like everyone here, I am here to learn how to mod Kotor 1 and 2. I am happy to help when I can. And don't mind getting corrected when I am wrong