Leaderboard

There were around 215 of these super tiny textures for implants etc, all done! Wasnt going to do these ultra small textures since i thought it would be too difficult to get anything decent out of them, but i think it turned out pretty good. And it is noticeable in game, especially anything that goes on your head.

I'm also interested in working on the Ajuur Medical Supplies Respawn request.

I know i started a topic like 2 years ago or something about doing a remaster / retexture, but i never got far into it. So I recently started over again using the new AI model i have been working on for the last 2'ish years on and off, the recent update made it really good at doing clothing. This retexture will be similar to my other remasters i've made in the last years (Jedi Knight 2, Thief 2,Morrowind and Gothic 2). So basically the full game retextured, maybe apart from the smallest stuff which doesnt make sense to retexture. I'm maybe 70% done or so. 1600+ textures so far, but some needs to be remade again or needs fixes. Some examples attached

Hello DeadlyStream folks, It's been a long time since I've attempted to create a mod and I'm trying to create the ultimate performance mod for old hardware for KOTOR. For context, my one and only mod contribution to this site has been the TSL of the OLD PC. This is thanks to a combination of contributions by modders on here like BeadV+MDLedit , DarthParametric for allowing me to take his widescreen menu and remove the particles, and the kotor tool by Fred Tetra). Unfortunately, this didn't really address all of the issues of performance on low end systems for TSL. Thankfully it was pretty effective for a lot of use cases and I had fun working on it. Since then, I've wanted to revisit the original KOTOR in attempt to make it push 60FPS on the most meager hardware possible in a way that I could learn to do the same for TSL. In my current mod output testing, is an old Dell laptop running windows XP with 2GB of DDR2, a less than 2GHZ dual core and the infamous Intel chipset graphics accelerator running at a resolution of 1024x768. Successes: The main menu runs at 60fps, placeable explosions, sparks, and other effects visibly render and don't appear to be a detriment to FPS. Unnecessary map animations, added aurora lights, door animations+particles, particles have been removed. The overall framerate and gameplay pacing is better than the vanilla install (in some cases better than original xbox). Failures: At one point, I considered that the vertices, faces, and overall polygon count for map modules could be the ultimate destroyer of framerate on low end systems. So naturally, I looked up Blender tutorials to lower polygon and vertices count. I ended up using KotorBlender and followed that by using the decimate modifier on the nodes and had very limited gains (with some bad visual outcomes). Even when targeting unnecessary map objects that had a ton of vertices, this method didn't have enough FPS gains for what I was trying to achieve. While some map portions that were modified seemed to give an FPS boost, there seemed to be a deeper problem based on player viewpoint. My current struggles (Endar Spire Command Module): I've modified ALL Endar Spire command module maps, Global fx, characters, creatures, and global placeables using the following tools: MDLedit (BeadV), Holocron Toolset (Cortisol), and the kotorblender plugin for Blender (seedhartha). Even with these modifications, the framerate can't sustain over 30fps on the hardware that I'm testing. So far, the framerate appears to be utterly destroyed by the draw/render distance dependent of the controllable in game camera. In the case of the Endar Spire Command Module, the framerate plummets when the main character's camera viewpoint is pointed towards the bridge of the Endar Spire. Does anyone here have any pointers or advice to give me? I would very much appreciate it! 🙂

Hello! It seems almost impossible but only today did I realize that there is a black hole narrative plot in the game. To access the hangar at Davik's where the Ebon Hawk is parked, the Player needs to disable the hangar door's lock mechanism and that needs to be done via computer terminal. So far, so good. But in order to fly away with the Ebon Hawk, the Player should also need the security codes to disable what Davik in the intro tour calls "the state of the art security system I've had installed to protect her." I dismissed those words when I played, but they are significant and they are practically hinting at the existence of a very sophisticated alarm system. Other than Davik himself, the only other person able to bypass the alarm system is the Ebon Hawk's pilot Hudrow, currently being tortured at Davik's and kept in a cage. If you free him, he will reward the Player with sharing the security codes that SHOULD BE NECESSARY to fly the Ebon Hawk. But that is not the case. The Player can just disable the hangar door's security at the terminal just using spikes, enter the hangar, fight David Kang and happily leave with the Ebon Hawk. I'm very surprised that nobody else noticed it or spoke about it before me. Or perhaps I never found a topic about it. If there is an ongoing discussion I have overlooked, I'd be grateful to be pointed at it to learn what others would say. I'm locally going to do something about this to rectify the situation. Thanks!

Perhaps there is a misunderstanding here, SH. About T3 being a great hacker. I don't object to it in principle, but you realize that T3 would need to be in the party in order to make him the hacker of the Ebon Hawk security system. And this is just the second objection I have with it. The main one, I reiterate, is the fact that Davik's Estate narrative is based off retriving the security code from the pilot in the cage to steal borrow take possession of the Hawk. Having T3 bypass this requirement means killing much of the purpose behind the whole area. And the codes are already being given to the Player by the Ebon Hawk pilot once you turn off the energy cage trapping him. It happens via dialogue already. Having the codes found on Davik's body would make sense, but in the end it would not make sense trying to infiltrate the hangar without knowing the codes first. It's not that you could know in advance that you'll find Davik there without metagaming knowledge. Yes, that's exactly it. The content of the file k_ptar_davcomp2.dlg clearly shows that Bioware had originally thought of having Davik's personal computer somewhere in the base. The Player would have needed to upload the codes that disable the EH security using that specific computer. I will locally maintain the solution of having a combined effort to bypass both the hangar door and the EH security by making the Access Card's sole purpose that of saving spikes to use for the terminal's various commands. The terminal option "[Computer] Disable Hangar Security" will be changed to "[Computer] Upload security codes to access the hangar and disable the Ebon Hawk's shields." and will require having talked to the pilot for it to be present.

Isn't his "state of the art security system" a glorified electric fence?

Isn't T3 supposed to have superior code breaking and computer slicing skills? Got you into a Sith military base so I imagine getting onto the Ebon Hawk wouldn't be too much harder.

Some more in-game screens

Thank you for the tutorial and advice it was really helpful!

The time has come, the Echani are almost ready to be added to the K1 Alien Pack. These skins were, for the most part, made by me. The Echani textures in the K1EP are by RedRob41 and, I assume, aren't part of the modder's resource element of that mod. Below is an example of an Echani made by me. Since Brianna is supposed to be a hybrid of a human and an Echani (The human Arren Kae as the mother and the Echani Yusanis as the father) I wasn't inspired by her appearance when making the Echani, instead, I was inspired by the appearance of Raskta Lsu. This next skin is based on Daris Solomon's texture from BOSSR. As that mod can be used by modders as per SilverEdge9's blanket permission, I took Solomon's head and modified it to look like someone else despite still using the same head model. Below is the third Echani appearance, it isn't too visible but as you can see if you were to install the Devaronian install you'd get both species side by side. Since the cut Echani in the Ahto City Bar already has a UTC file, there are no extra compatibility patches for the K1 Alien Pack's Echani install and the RC-K1CP which will soon restore the Echani. Just install the RC-K1CP before the K1 Alien Pack's Echani and both the vanilla Echanis and the restored Echanis shall have Echani heads. There are 3 male Echani heads added with 8 NPCs across the entire game being converted into Echanis. Female Echanis may be added in a future update and named NPCs may get their own unique Echani heads in the Galaxy of Faces mod. If you think the K1 Alien Pack adds too few Echani, don't worry - the Echani are few only because the K1 Alien Pack will add more aliens throughout the game so no one alien species will be overrepresented. The K1 Alien Pack's Echani update shall come with another new alien species which I hope to share here once those ones are ready. Stay tuned!

Hello everybody! It's been a while since i posted anything on the forum. I decided to officially start the topic for this big work in progress project, doing something way more structured than my original topic that you can see here : Zobizob's playground. The original topic was going in every direction and was a literal mess, but now i have got a proper aim and goal. You can find the informations within the spoilers down below, have a nice read! Who am I? Why this project? What is the "Kotor Expansion Pack"? The current state and future of this project The very first small showcase from this project, shaping the environments The credit list Sketchfab models under creative common attribution license. Thank you for reading, and stay tuned for more

Here me out here, would it be possible to release the mod as updates or separate mods? You might be familiar with my own NPC Overhaul Series, the NPC Diversity Pack was lackluster when it came out and it's been updated over the years to include new content. Mods like Hearts of Beskar are part of the series but are separate incase people do not want, or cannot use, said mods but still want an NPC Overhaul via the Diversity Pack. The K1 Alien Pack isn't done, far from it, and all the aliens are added via separate installs meaning you can add Devaronians to your game without the Bith and you can add Quarren later when they're added for example. Would you be willing to tell us why this is important? Because I've ported Sith Commandos to Kotor I before, and the inclusion of Sith Commandos in Kotor I doesn't really negate Kotor II. I know you've ported a lot of Kotor II assets into Kotor I, and things like adding Devaronians or Mining Droids into Kotor I wouldn't hurt Kotor II. In the words of the famous Calo Nord: "Smart." Now this is what I mean when I suggest releasing these as separate mods. Having one big Frankenstein of a mod pack is bound to cause issues down the line with other Force Power and Feat mods, and not to mention that if players don't like the feats or powers you add they might just not play the mod, thus missing out on all your added content in-game because they didn't want the powers. Now if the mod was divided into multiple mods, you'd obviously play with all your separate mods together as that is the original intent but others might choose to not use your Feat and Force Power mod, or they might only play with your Feat and Force Power mod. Ultimately, separating your mods will be better because let's say if there is a bug with one of your Force Powers you'd only have to worry about your one Feat and Force Power mod instead of worrying about updating your big mega mod. What I'm saying here isn't your fault by any means, but I know there is at least one player who is boycotting the K1CP mod because of the Sentinel and Consular Class Skill Swap fix included in that mod. Petty, very much so... but if you have your class revisions as a standalone mod you won't have to deal with people downvoting your mod and writing entire essays as to why your changes to the classes are wrong (as is what happened with the K1CP). Can you explain how this works in-game? I thought classes were hard-coded. Care to show us some of these appearances? You mentioned "voice lines". Will these be voiced by an actor or by an AI? I obviously don't care about AI as I used AI to add voices for the generic background characters in the Revenge of Revan mod, but other players definitely do care about AI. Much like the guy who boycotts the K1CP because of the Sentinel and Consular Class Skill Swap fix, players might just avoid your mod if it uses AI. Again, if you were to divide your mod into multiple smaller mods that means the Anti-AI crowd would only avoid the one mod that uses AI whilst they might still use your previously mentioned Feat and Force Power mod and Class revisions mod for example. Will you be uploaded these fixes as standalone fix mods or donate them to the K1CP? I know many players play Kotor I and II with just the restored content mods and bug fix mods so these would definitely be valued as standalone mods without Feats, Force Powers, 100 new appearances, and possible AI voice lines. So what you're saying is that you took Kotor II placeables and "combined" them with the Kotor I modules, this is how you added the Oil Bath in the screenshot you provided without adding a new placeable, right? I would love to see this in-action! I would like to see what you have made here. I would like to hear some of your plans for these modules, and if you aren't wiling to reveal your plans in private then feel free to message me privately. I would like to see what you're doing for the restored Black Vulkar Base, my RC-K1CP mod will restore it at some point but as an optional install so our two mods may just be compatible with one another. I know there was another team working on the Enclave Sublevel, is this a separate project or are you collaborating with, or taking over, the work they did previously? I believe I donated a texture to that project too. I am curious as to how you plan to expand the Dantooine Crystal Cave, it logically makes sense that the cave is small in Kotor I but by the time of Kotor II the Militia bombed the original entrance and so the Kinrath dug out a larger cave system into the Khoonda plains. Are you just going to add new Kinrath enemies/lightsaber crystals, or is this where your disregard for Kotor II comes into play? I believe you've shown some of these off already on YouTube, and just like I've been saying I think separation of the mod into smaller mods, or at least different optional installs like what I did for my K1 Alien Pack might be for the best here. I do recall you added a Kotor II inspired cutscene in the Cantina where a bartender droid shows off the Upper City Cantina, this I felt was a work of art and I would 100% use it... should it be standalone from the other two examples I'm about to list. You added a female Sith Guard to the Sith Base on Taris, and even if she's voiced by an AI or an actor I felt the inclusion of her would be subjective. Some players might like the encounter, others might not. I 100% would use the Protocol Droid scene in the Cantina but might not be so keen on this cutscene. One cutscene I am not keen on is your enhanced Undercity Patrol. I believe you added a parody of the "Death Troopers" from the movie Rogue One with audio ported from Star Wars Battlefront II, unless I am mistaken. You've said that you joined the Kotor Modding Community last year, that's fine - but when I joined the Community almost 10 years ago I joined during the time when porting between Kotor I and II was a bannable offense. I think either TSLRCM or M4-78EP was removed from this site at one point because the end credits included the theme "The Old Republic" from Kotor I in its ending credits. Fun fact: I believe before the ban was lifted in 2018 the Administrators uploaded a blatantly obvious port of audio from Kotor I to Kotor II to see if people would even notice, well I noticed and I pointed it out. I guess you could say my logic in pointing it out back then was "If I can't port, you can't port". Thankfully, porting has been allowed for some time now and it's made the Kotor Modding Community so much more interesting with the mods we're now making. But as someone who made mods during a time when you couldn't port between Kotor I and II, can you understand why I'd be uncomfortable to play a mod that ports audio from Star Wars Battlefront II into Kotor I? Again, I'd happily use your Protocol Droid in the Upper City and probably many of your appearances too, but the Death Trooper is one that I would skip out on... though on the flip side someone might happily use the Death Trooper and skip the Protocol Droid in the Upper City. Regardless of what you might think of my opinion on the Sith Guard and Death Trooper, should you ever release the Protocol Droid in the Upper City, regardless if its standalone or part of a massive mega mod, would you be willing to make a compatibility patch with my RC-K1CP mod which restores the original Protocol Droid bartender to the Upper City Cantina? This is going to sound really dumb after everything I've said but do you think you can add the Taris Middle City into Kotor I? If you're using AI then dialogue and voices for already existing characters and new characters won't be a problem and, through model editing work, you seem to have the competency to make new and unique modules for a hypothetical Middle City section for Taris. But I understand if you don't want to. That'll be good! Also very good, don't make promises - the mod comes when it appears on the site out of the blue. I mean... maybe if you do go with the 'Frankstein Mega Mod' route I might be able to separate things that I like for you. Despite my criticisms with a few things, the standalone assets you've made thus far are fantastic!

Hello KotOR modding community. It has certainly been a long time since I've posted here. While life has been busy and can get in the way of modding, I have been working on a big project in secret. For the past few years I have been chipping away at my own version of an A.I. Upscale 4x mod for most of the default character files in both games. Because it has been slow going, I didn't want to get distracted by constantly responding to "when is it going to be ready?" prompts when I could be spending time on the files. I also didn't want to get anyone's hopes up about it, only to then keep delaying because I'm often too much of a perfectionist. But after so much time has elapsed, I keep thinking that I need to put something out, even if it is incomplete in my books. To give you an idea of how big a project this is, I have completed 329/475 textures that are common to both games, 71/214 textures for K1, and 184/419 textures for TSL. That makes for a grand total of 584/1108 textures or 52.71%. I'm using the textures as the basis for completion, but there are also 459 models for K1 and 648 models for TSL completed so far. I've attached a spreadsheet with a list of all the files involved. The reason why it is so slow going is that this mod is more than just a simple process of running all the character textures through an A.I. upscaling program. The purpose is to increase the size and fidelity of the character textures while maintaining the painterly style of the original game artists. I have also been attempting to fix many of the UVW mapping errors, lighting errors, and some XYZ errors that the original model .mdl & .mdx files may have had. One problem of upscaling textures that I've found is that the model seams become glaringly obvious at higher resolution, so I've been painstakingly painting those to look seamless. Anyone who is familiar with my previously released mods will know how much I try to fix those pesky model errors. The other thing about A.I. upscaling software, is that I haven't found one that gives perfect results. Instead of relying on one result, I usually run texture files through an A.I. upscaling program multiple times using different settings. Some settings result in "crunchy" textures (high contrast, sharp edges). Some result in "soft" textures (smooth gradients, lower contrast, blurry edges). Some result in better straight/parallel lines. Early tests used Vance AI; Deep Image; ImageUpscaler; or Let's Enhance. Eventually Topaz Labs' Gigapixel AI was chosen and used on the majority of textures. Then I combine textures in a multi layered Photoshop file, using layer masks to isolate the best parts of each upscaled image. This allows for some portions to be smooth (like skin, glass, metal or tubing), others to be sharp (like burlap, skin folds, hair, scratches, etc). Then I manually paint away errors, fix seams, and make additional changes. At any rate, the reason for this WIP post is that I've been out of the loop for so long, that I don't know the best way to package and upload the mod. I usually use 7zip, so that's not the problem. I currently have 378 tga, tpc, & txi files (4.09 GB) that are common to both games; 459 mdl, mdx, tga, tpc, & txi files (1.07 GB) specifically for K1; 648 mdl, mdx, tga, & txi files (2.90 GB) specifically for TSL. I was originally planning on packaging them up all together and letting the user to put them into their respective override folders, making the common files only needing to be downloaded once. The other option is to make two download packages, one for each game, where the common files are included in both packs. This would result in having to download the largest batch of files twice, but it would be easier for installation. To complicate it further, I would also make download packages for a tpc only installation (for smaller file sizes and easier to run in-game). The other questions I have are: which upload method do users prefer: single download for both games (smaller size overall), or two files (one for each game makes installation easier)? how many screenshot images can be uploaded to showcase the contents of the mod? I currently have 197 pngs for a total of 561 MB, and would like to make more. I've attached a few to sample a range of the types of changes the mod tackles. are there any samples for the Read Me file regarding Permissions and Credits? I want to make the tga version into a modder's resource. Where is the best place to put a link to my "Buy me a Coffee" tip jar? I'm hoping to use any funds towards software upgrades for future modding. I don't know if I'll ever actually finish this mod, but I need to share what I've got before the universe jumps in again and makes something impossible for me. Anyway, happy New Year. I hope to continue more of this work in 2025. Screenshot samples: KotOR upscale completed list v0_52.xlsx