Untold Prophecy

Please drop any Lightsaber hilt mods you have created here

Recommended Posts

@Untold Prophecy: Luke's ESB saber (Dagobah version from memory), as requested.

DP_Luke_ESB_Saber.thumb.jpg.ace3d87cbd49dcd501db7ff200ff743e.jpg

K1 - https://www.darthparametric.com/files/kotor/k1/[K1]_Luke_ESB_Lightsaber.7z

TSL - https://www.darthparametric.com/files/kotor/tsl/[TSL]_Luke_ESB_Lightsaber.7z

Available as unique hilts and vanilla cyan overrides. Only tested very briefly in K1, but it seemed to be ok.

And for anyone else with a similar unquenchable Graflex fetish, here's the ANH version as well:

DP_Luke_ANH_Saber.thumb.jpg.89d04049443b6dbde6f0d1fd410f384f.jpg

K1 - https://www.darthparametric.com/files/kotor/k1/[K1]_Luke_ANH_Lightsaber.7z

TSL - https://www.darthparametric.com/files/kotor/tsl/[TSL]_Luke_ANH_Lightsaber.7z

  • Light Side Points 2

Share this post


Link to post
Share on other sites
7 hours ago, DarthParametric said:

@Untold Prophecy: Luke's ESB saber (Dagobah version from memory), as requested.

K1 - https://www.darthparametric.com/files/kotor/k1/[K1]_Luke_ESB_Lightsaber.7z

TSL - https://www.darthparametric.com/files/kotor/tsl/[TSL]_Luke_ESB_Lightsaber.7z

Available as unique hilts and vanilla cyan overrides. Only tested very briefly in K1, but it seemed to be ok.

And for anyone else with a similar Graflex fetish, here's the ANH version for TSL as well - https://www.darthparametric.com/files/kotor/tsl/[TSL]_Luke_ANH_Lightsaber.7z

Thanks, Darth! Your work is the best of the best on here!

I don't know what the equivalent is to buying you a drink on here, but let me know and I'll return the favor!

Share this post


Link to post
Share on other sites
7 minutes ago, DarthParametric said:

That was from over a decade ago (ANH hilt was June 2008 according to the LucasForums archive), so it wasn't even my final form.

How much stuff like that do you have on file, out of curiosity? I've pulled your Kyle Katarn hilt off your site before, and I've gotten the Ven Zallow and Anakin hilt from you in a PM a while back. 

Would you ever consider throwing everything you've got into a single TSL Patcher install and posting it? Either in this thread or on the main site? 

Your work honestly is the best I've seen for either game, and I would easily be the first one to download a mass folder like that if you ever released one. 

Share this post


Link to post
Share on other sites
3 minutes ago, DarthParametric said:

Probably not much in the way of sabers (or really much of anything else that would be useful).

Either way. If you ever go through your hard drive and have some finished sabers (or unfinished ones you decide to finish up), absolutely feel free to post them here. They're must-have files for me, and the traffic in this thread shows there's at least some demand. 

10 hours ago, DarthParametric said:

@Untold Prophecy: Luke's ESB saber (Dagobah version from memory), as requested.

K1 - https://www.darthparametric.com/files/kotor/k1/[K1]_Luke_ESB_Lightsaber.7z

TSL - https://www.darthparametric.com/files/kotor/tsl/[TSL]_Luke_ESB_Lightsaber.7z

Available as unique hilts and vanilla cyan overrides. Only tested very briefly in K1, but it seemed to be ok.

And for anyone else with a similar Graflex fetish, here's the ANH version for TSL as well - https://www.darthparametric.com/files/kotor/tsl/[TSL]_Luke_ANH_Lightsaber.7z

I threw the ESB hilt into my Override, but the texture seems to have a bug on the upper half of the saber. Would you be willing to take a look? @DarthParametric

20200629123951_1.jpg

Share this post


Link to post
Share on other sites

Odd. I added a shadowcaster mesh (i.e. set to cast shadows but not render). It didn't actually work - it seems even vanilla sabers don't cast shadows. But there were no problems in K1. But it seems TSL renders the shadowcaster, despite the render flag being set to false, which is what you are seeing there. I have removed that mesh in the TSL version so it is working as intended now. Redownload from the link above.

  • Light Side Points 1

Share this post


Link to post
Share on other sites
11 hours ago, DarthParametric said:

Odd. I added a shadowcaster mesh (i.e. set to cast shadows but not render). It didn't actually work - it seems even vanilla sabers don't cast shadows. But there were no problems in K1. But it seems TSL renders the shadowcaster, despite the render flag being set to false, which is what you are seeing there. I have removed that mesh in the TSL version so it is working as intended now. Redownload from the link above.

All good to go now! Sorry to bug you with it!

Thanks again!

Share this post


Link to post
Share on other sites

I was going back through some older discussions on Discord trying to find something and along the way I found this half-finished hilt that I slapped a simple texture on to for an example of how to generate various baked maps. It wasn't really meant for endusers, but I figured it might be of interest to someone. It's only set up as a an override of the blue single hilt, so you'll need to edit it yourself if you want it in different colours or as a unique option.

Ki_Adi_Mundi_In-Game_2.thumb.jpg.3fc5608464278f88b59f7d29f178771f.jpg

https://www.darthparametric.com/files/kotor/k1/[K1]_Ki-Adi-Mundi_Clan_Saber.7z

https://www.darthparametric.com/files/kotor/tsl/[TSL]_Ki-Adi-Mundi_Clan_Saber.7z

  • Thanks 1

Share this post


Link to post
Share on other sites

I wanted to make an update to this thread in case anyone wanted a few saber recommendations from the Downloads section of the main site. These are all relatively compatible with the files that have already been posted into this thread. If you're not sure on the compatibility, then I recommend downloading from my list first and then downloading (or redownloading) anything you've previously pulled. Or you can always read the file description or the Readme file included.

Please note that all of these files are only meant for Kotor 2 (with exception of the Luke hilt that works in both games). Please use this as a reference for anyone new to the site looking for saber replacements. These are what I have kept in my Override for the past 5 years now. I haven't had any compatibility issues between them and other non-saber related mods and they work fine with running the Steam versions of TSL:RCM 1.8.5 and M4-78. There are others that I have run before and are also works of art, however I have left them out because they cause compatibility problems with other mods I have installed before. If you enjoy the work of these mod authors, please be sure to leave them a positive review.  

Sabers:

 

 

 

 

 

 

Blade/Color Replacements (please download only one of these, as they overwrite each other in your override):

 

Share this post


Link to post
Share on other sites

I noticed I had a half-finished Vader ANH hilt from a few years back. I think I probably used that as the basis of the Anakin AOTC hilt, but then never got around to finishing it. So I put together a texture for it. Available as a unique and vanilla red hilt replacement. I think oldflash already has a Vader hilt in his movie hilts pack, but from memory it was the ROTJ version which I dislike (it was a Graflex bastardised to look kind of like an MPP).

DP_Vader_ANH_Saber.thumb.jpg.2d162437fdbe70d5d2302dcfb7b348ba.jpg

K1 - https://www.darthparametric.com/files/kotor/k1/[K1]_Darth_Vader_ANH_Saber.7z

TSL - https://www.darthparametric.com/files/kotor/tsl/[TSL]_Darth_Vader_ANH_Saber.7z

And since I mentioned it and I don't recall whether it was posted publicly or not, the said Anakin AOTC hilt:

DP_Anakin_AOTC_Saber.thumb.jpg.dc87b5e2d3257209aa27a6438460aef8.jpg

K1 - https://www.darthparametric.com/files/kotor/k1/[K1]_Anakin_AOTC_Saber.7z

TSL - https://www.darthparametric.com/files/kotor/tsl/[TSL]_Anakin_AOTC_Saber.7z

  • Like 2
  • Thanks 1

Share this post


Link to post
Share on other sites

The Vader is new to me, so I'll be sure to grab that! I'm surprised you dislike the ROTJ version though. I've always liked the ROTJ version because it felt more chunky and large for Vader's massive hands. The poetry of it being a "bastardised Graflex" is pretty cool too, since Vader is just a bastardised version of Anakin. It also doesn't help that I had the ROTJ toy growing up.

The Anakin you gave me a few years ago, but it's been in my Override since then and is usually my go to saber in a playthrough (unless I'm using Evasto's ROTJ). It's one of the best versions I've seen and completely blows the USM version of it out of the water!

Share this post


Link to post
Share on other sites

@Untold Prophecy, I just discovered I apparently made a meal of the 2DA setups in prior uploads, resulting in the Luke and Vader sabers probably causing a crash if you try to play around with the unique variants at a workbench. I've (hopefully) sorted that out now. I've tested all of them to confirm they work properly at a workbench and have reuploaded them (same links above). You'll have to revert upcrystals.2da before reinstalling. If you don't have a backup you'll have to manually edit it to remove those rows. And you might have to remove any existing hilts/crystals from your inventory and re-add them. Apologies for the screwup/s. Edit: The TSL version of the Anakin AOTC suffered from it as well it seems. Also fixed that.

===================================

I realised all my old sabers that are on my site probably had their UVs mulched by MDLOps. I can't be assed dealing with most of them, but the Henchman was possibly my favourite of all the hilts I ever made, so I decided to redo that one at least. The original was blue, but I made the new incarnation green since I already posted a bunch of blue ones. Available as a unique and vanilla green hilt replacement. There's also an optional weathered/damaged texture, which was part of the original request.

DP_Henchman_Saber.thumb.jpg.848c0bc30c3622548d3f5f8554cf0680.jpg

K1 - https://www.darthparametric.com/files/kotor/k1/[K1]_Henchman_Hilt_v2.0.7z

TSL - https://www.darthparametric.com/files/kotor/tsl/[TSL]_Henchman_Hilt_v2.0.7z

I was thinking that since you are compiling lists of hilts, it might be a good idea to make a table of model variations to see which ones clash. Can probably put it up on Github or something.

  • Like 1

Share this post


Link to post
Share on other sites

Ugh, now you've got me on a saber kick. Here's a new one - Luke's "V2" saber from ROTJ. This is more or less the actual hero, since this is the one used for hanging off his belt and any non-stunt/combat shots. It's actually one of Obi-Wan's stunt sabers from ANH (notably in the scene where Vader gives him the chop), hastily pressed into service after they started filming with an ESB Graflex before realising that Luke was supposed to have lost that on Bespin...  It's notable for being ratty as hell, covered in gunk and worn and flaking paint, with gaffer tape around the neck to stop the emitter from rotating and holes in the pommel/booster area plugged up with some random bits. A few other Obi stunts were also used, one of which, the short-bladed "Yuma" hilt used during the sail barge fight (where Luke gets shot in the hand), was later cleaned up, repainted, and given a custom control box to become what most people know as the hero for reshoots. It's only seen in a single shot, the insert shot of Vader twisting it in his hands on Endor. It was also used in the cut cave construction scene, which was later made available on the Bluray release.

DP_Luke_ROTJ_V2_Belt_Hanger.thumb.jpg.a2445803880f92fd2bfdd4c108c066f8.jpg

K1 - https://www.darthparametric.com/files/kotor/k1/[K1]_Luke_ROTJ_V2_Belt_Hanger.7z

TSL - https://www.darthparametric.com/files/kotor/tsl/[TSL]_Luke_ROTJ_V2_Belt_Hanger.7z

Doesn't look so flash in-game, since you can't really resolve a noisy texture like that from a distance, but eh.

  • Thanks 3

Share this post


Link to post
Share on other sites
7 hours ago, DarthParametric said:

Ugh, now you've got me on a saber kick. Here's a new one - Luke's "V2" saber from ROTJ. This is more or less the actual hero, since this is the one used for hanging off his belt and any non-stunt/combat shots. It's actually one of Obi-Wan's stunt sabers from ANH (notably in the scene where Vader gives him the chop), hastily pressed into service after they started filming with an ESB Graflex before realising that Luke was supposed to have lost that on Bespin...  It's notable for being ratty as hell, covered in gunk and worn and flaking paint, with gaffer tape around the neck to stop the emitter from rotating and holes in the pommel/booster area plugged up with some random bits. A few other Obi stunts were also used, one of which, the short-bladed "Yuma" hilt used during the sail barge fight (where Luke gets shot in the hand), was later cleaned up, repainted, and given a custom control box to become what most people know as the hero for reshoots. It's only seen in a single shot, the insert shot of Vader twisting it in his hands on Endor. It was also used in the cut cave construction scene, which was later made available on the Bluray release.

DP_Luke_ROTJ_V2_Belt_Hanger.thumb.jpg.a2445803880f92fd2bfdd4c108c066f8.jpg

K1 - https://www.darthparametric.com/files/kotor/k1/[K1]_Luke_ROTJ_V2_Belt_Hanger.7z

TSL - https://www.darthparametric.com/files/kotor/tsl/[TSL]_Luke_ROTJ_V2_Belt_Hanger.7z

Doesn't look so flash in-game, since you can't really resolve a noisy texture like that from a distance, but eh.

This looks to be the nicest one yet, dude! I can't wait to start using it!

Share this post


Link to post
Share on other sites

I noticed I made Obi-Wan's TPM saber for someone at some point around 2016. Was that you UP? It was marked as "TEST" and there was only a TSL version. Anyway, I created a new TSLPatcher setup and recompiled the model with some minor tweaks to it and the texture. Available as a unique and vanilla blue hilt replacement.

DP_Obi-Wan_TPM_Saber.thumb.jpg.c6f39ce90838b2b63887bf9fdcd5b77d.jpg

K1 - https://www.darthparametric.com/files/kotor/k1/[K1]_Obi-Wan's_TPM_Lightsaber.7z

TSL - https://www.darthparametric.com/files/kotor/tsl/[TSL]_Obi-Wan's_TPM_Lightsaber.7z

Share this post


Link to post
Share on other sites

@DarthParametricI don't think that would have been me because I'm more of an Obi-Wan ROTS fan over his TPM hilt. 

2016/2017 was around the time I got back into SWTOR too, so it must have been someone else. 

Share this post


Link to post
Share on other sites

DP_Obi-Wan_ANH_Saber_01a.thumb.jpg.f8bc4f55a77b1545bf729b0243fe9627.jpg

Obi-Wan's hilt from ANH. The true prototype hardware saber, cobbled together from random assorted crap. The balance pipe from a Rolls Royce jet engine for the emitter, a WWI rifle grenade for the upper body, a Graflex flashgun clamp with Texas Instruments calculator bubbles and a booster from a Browning machine gun for the middle/lower, plus an Armitage Shanks sink tap/faucet knob for the pommel. It's truly remarkable how well the individual pieces fit together given their diverse origins.

K1 - https://www.darthparametric.com/files/kotor/k1/[K1]_Obi-Wan's_ANH_Lightsaber.7z

TSL - https://www.darthparametric.com/files/kotor/tsl/[TSL]_Obi-Wan's_ANH_Lightsaber.7z

  • Like 3

Share this post


Link to post
Share on other sites
On 2/7/2020 at 21:01, DarthParametric said:

@ Profecía no contada, Acabo de descubrir que aparentemente hice una comida de las configuraciones de 2DA en cargas anteriores, lo que resultó en que los sables de Luke y Vader probablemente causen un bloqueo si intentas jugar con las variantes únicas en un banco de trabajo. (Con suerte) lo he resuelto ahora. Los probé todos para confirmar que funcionan correctamente en un banco de trabajo y los volví a cargar (los mismos enlaces anteriores). Tendrás que revertir upcrystals.2da antes de reinstalar. Si no tiene una copia de seguridad, tendrá que editarla manualmente para eliminar esas filas. Y es posible que tenga que eliminar cualquier empuñadura / cristal existente de su inventario y volver a agregarlos. Disculpas por el tornillo / s. Editar: La versión TSL del Anakin AOTC también lo padeció. También reparó eso.

===================================

Me di cuenta de que todos mis viejos sables que están en mi sitio probablemente tenían sus UV bloqueados por MDLOps. No puedo estar seguro de que lidiar con la mayoría de ellos, pero el Henchman fue posiblemente mi favorito de todas las empuñaduras que hice, así que decidí rehacer ese al menos. El original era azul, pero hice la nueva encarnación verde ya que ya había publicado un montón de azules. Disponible como un reemplazo de empuñadura único y verde vainilla. También hay una textura opcional desgastada / dañada, que era parte de la solicitud original.

DP_Henchman_Saber.thumb.jpg.848c0bc30c3622548d3f5f8554cf0680.jpg

K1 - https://www.darthparametric.com/files/kotor/k1/[K1font>_Henchman_Hilt_v2.0.7z

TSL - https://www.darthparametric.com/files/kotor/tsl/[TSLfont>_Henchman_Hilt_v2.0.7z

Estaba pensando que ya que está compilando listas de empuñaduras, podría ser una buena idea hacer una tabla de variaciones de modelos para ver cuáles chocan. Probablemente pueda ponerlo en Github o algo así.

 

sorry won't you have this hilt in blue?

Share this post


Link to post
Share on other sites
On 1/5/2019 at 10:15 AM, Oaks said:

Sorry it took so long but as I said before, I have very little time with my main computer now.

Here are some screenshots of some hilts that I have but I dont see around in mod sites.

REMEMBER: those are not mine and I am uploading just screenshots, remember this if you see an image and find out that the mod is yours.

The hilts are:

-The two of Ahsoka from clone wars

-Darth Bane's(the fan made using the novels as basis, not the official that ignores the novel description)

-Ben Solo from episode 8(the only good thing of that movie if you ask me)

-A generic curved hilt

-A double bladed curved similar to Asajj Ventress

-A generic double

-Exar Kun double bladed (but being held as if it is a single hilt)

-Kanan's from rebels

-Rahm Kota's from the force unleashed game

-Malak's official hilt

-Darth Malgus's from swtor

-Maul's from rebels (it even has a cane version, that I give to Kreia at the begining of the game)

-A generic lightsaber pike

-A variation of Revan's from swtor

-Satele double bladed from the swtor cinematics

-Savafe Opres's from clone wars

-The spinning lightsaber of the inquisitor from rebels

-And the temple guard double bladed

ahsoka.jpg

bane.jpg

bensolo.jpg

curved.jpg

dcurved.jpg

double.jpg

exar.jpg

kenan.jpg

kota.jpg

malak.jpg

malgus.jpg

maul.jpg

pike.jpg

revan.jpg

satele.jpg

savage.jpg

spinning.jpg

templeguard.jpg

Hey there, I know I'm extremely late to this thread, and it's probably better off dead now, but could you please possibly give me the Exar Kun hilt, if at all you're willing to indulge my request? I would genuinely appreciate it.

Share this post


Link to post
Share on other sites
2 hours ago, Drip Lord said:

Hey there, I know I'm extremely late to this thread, and it's probably better off dead now, but could you please possibly give me the Exar Kun hilt, if at all you're willing to indulge my request? I would genuinely appreciate it.

Done.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.