Leaderboard


Popular Content

Showing content with the highest reputation since 08/27/2010 in Files

  1. 10 points

    Version 1.0.0

    574 downloads

    Good afternoon. I worked very long on these textures. I can call them one of the best of my works. The archive contains 2 textures: the texture of the woman's form and the shape of the man. The resolution of the textures is 2048X2048. This resolution allows you to carefully draw each piece of equipment. Attention was paid to everything: rivets, buckles, shadows, cloth, chevrons. Enjoy.
  2. 9 points

    Version 1.4

    395 downloads

    Start as you mean to go on. For KOTOR, that apparently means leave lots of holes in your level geometry. This mod plugs some gaps in the hull of the Endar Spire, and fixes a few UV issues. Fixes: Plugs two strips that run along either side of the dead-end corridor on the Command Deck that are open to space. These are hard to see, but noticeable just above the windows in this section. Additionally, an alteration to the model's hierarchy was made so that the light strips now correctly animate. Removes an extraneous strip of mesh that was causing z-fighting issues (i.e. flickering) in the central corridor where the Jedi vs Sith fight occurs. Plugs two gaps in the room just before the escape pods in the Starboard Section. Additionally adjusts the lightmap UVs to remove a light bloom that occurred during baking due to the offset geometry. Fills some holes in the forked section of corridor in the Starboard Section just before the escape pod room. Also fixes some flipped UVs causing inverted wall trim textures in this area. Corrects some misaligned polys in an inset panel in the end wall of the escape pod room in the Starboard Section. Also adjusts the lightmap UVs of said polys to correct their baked lighting. Fixes some UVs causing inverted wall panel textures in a couple of corridor sections on both the Command Deck and Starboard Section. Installation: Simply copy the model files across to your Override folder Acknowledgements: Thanks to @JCarter426 for initially hunting down these holes and pointing them out to me Thanks to @ebmar for finding a number of additional issues Thanks to @bead-v for KOTORMax and MDLEdit
  3. 9 points

    Version 1.0

    856 downloads

    There are so-called "lite" alien models that are of lesser quality than most other models in the game. These include the Quarren and Gran species. Both aliens feature more prominently in the sequel and their models were given an overhaul. This mod ports the K2 versions of the models back to K1, improving the quality of models and creating a more consistent aesthetic.
  4. 8 points

    Version 1.0.1

    379 downloads

    This mod adds the head model of the Jedi Knight companion Kira Carsen from The Old Republic MMO, ported to TSL as a selectable player head for female characters. TOR uses the same base head mesh for Kira and Meetra Surik, so this was basically a two-for-one deal since the most difficult part is reskinning the face. A few notes: While aligned as closely as possible, the neckline probably won't match perfectly. Expect some visible gaps on body models that don't hide the join. The TOR head models use separate textures for the face, eyes, and hair. In order to allow for DS transitions, these had to be merged together (and the UVs adjusted to match). The eyes are the big loser in this. They went from having their own dedicated 256x256 texture to being shrunk down to a corner where they could be squeezed in. An additional consequence of the texture merge is no normal maps, due to the hair requiring alpha masking. TOR heavily relies on tint mapping textures for variation - skin tone, hair colour, eye colour, etc. Unfortunately, while the tint colours are available in the material files, the specifics of their shaders are currently unknown to me, so the best I can do is experiment with various blend modes to approximate the look. It may require some further experimentation and kludging. Not even having specularity, much less the advanced (by comparison) graphical features of TOR, expect textures to look pretty flat by comparison to the originals. KOTOR has a maximum bone limit per mesh of 16. This creates a problem for TOR meshes, as adding the eyelids to the face bone array pushes that to 18. I had to drop 2 bones to make it work. I chose the two nose corner bones, as they seemed the least important. I don't know what effect this may have on various facial animations though. The hair meshes are currently completely rigid. Possibly I may add a danglymesh version in a future update. Dark Side transitions are included, but they are relatively mild. I'm not a big fan of the zombie look. Installation If you are using TSLRCM or the hybrid TSLRCM + M4-78 from the Steam Workshop, make sure to choose its Workshop folder as the installation location, not the main game folder. Acknowledgements: Original models and textures ported from The Old Republic MMO Thanks to @bead-v for KOTORMax and MDLEdit Thanks to @ndix UR for TGA2TPC Thanks to zaramot on the Xentax forums for the TOR GR2 Max import script
  5. 7 points

    Version 1.0.0

    84 downloads

    This mod adds a new type of stimulant item that will remove status effects applied to the user. There is a bug with the game that in some instances causes effects such as Slow to be applied to the player/party (semi-)permanently, with no practical in-game way to remove them. To use, simply add the "Cup of Caf" item (g_i_adrnaline025) to your inventory via KSE or console command. It will appear in the GUI alongside other stimulants like adrenals and is used in the same manner. Each item is single use and will remove ALL status effects currently applied to the user. This includes both positive and negative effects, so take care when you use it. It is intended as more of last resort bug fix item than for general use. The droid-specifc companion mod, Droid Oil Bath, is available here. Known Issues: Uses the "inject into thigh" animation like all stims/meds. I did attempt to disable that, but I suspect it is hardcoded. Acknowledgements: Thanks to @JCarter426 for pointing out the cause of the bug and coming up with the original script fix Cup image/icon modified from "Coffee cappuccino cup" by PikWizard Gulp sound effect modified from "gulping and drinking_1-2" by schatzl03 / Freesound
  6. 7 points

    Version 1.0.0

    243 downloads

    This mod addresses an issue with the vanilla Zeison Sha armour model for males (PMBMM). It appears something happened during its creation by Obsidian that results in the left hand being unable to reach far enough across the body to properly perform a two-handed grip during weapon animations. The model was also undersized compared to the other male models. Fixes: Scaled the model 102% to bring it in line with the height/size of other medium male models Adjusted some hand and wrist skin weights to minimise bad deformation Swapped to the PMBNM rig to alleviate left arm position/rotation issues Known Issues: It seems like swapping to the PMBNM rig may have traded one set of issues for another. There appear to be some deformation problems with the right hand that aren't present when using the original rig. I may swap to a third rig at some point to see if I can find a better solution. The dual melee wielding animations still suffer from the vanilla bug of the off-hand clipping through the hilt. Download @JCarter426's Supermodel Fix for K2. Installation: Simply copy the model files across to your Override folder Acknowledgements: Thanks to @JCarter426 for pointing out the issue and testing the various fixes Thanks to @bead-v for KOTORMax and MDLEdit
  7. 7 points

    Version 1.0.1

    1,174 downloads

    Have mercy on me, O God, according to your unfailing love; according to your great compassion blot out my transgressions. Wash away all my iniquity and cleanse me from my sin. Psalm 51:1-2 Spectral Ajunta Pall Canonical Appearance DESCRIPTION: This mod replaces the silly, non-intimidating Dark Jedi Ajunta Pall with a scarier, more canon-accurate version. His weak gentle voice has been tweaked too so he is a little more intimidating. INSTALLATION: - Use the TSLPatcher and select the install option UNINSTALLATION: - Run the TSLPatcher with the uninstall option - Delete these files from override: -- p_ajuntah.tpc -- p_ajuntabb.mdl -- p_ajuntabb.mdx -- p_ajuntab.tpc -- p_ajunta.tpc -- kor37_freedon.utc -- ajunta_mask.tpc -- ajunta_maskb.tpc CREDITS: - Bead-V and ndix-ur for their work on mdledit/mdlops - Fred Tetra + KOTOR TOOL - Obsidian, Bioware and the Odyssey Engine - The DeadlyStream Community who has been around all of these years - Jesus Christ, My Lord and Savior. For everyone who calls on the name of the Lord will be saved.
  8. 7 points

    Version 1.3

    574 downloads

    Throughout KOTOR 1 there are many models that are "lite" versions. Low-poly and low-res textures in order to help older computers. Since most computers can handle it fine now, this mod upgrades all possible lite models to full-res models/textures. (There are a few models that only have "lite" versions, and obviously nothing can be done). Here's a list of all the models affected by this mod: All Lite Commoner models (22 in total) Lite Jawa Lite Protocol Droid 01 Lite Protocol Droid 02 (No new model, but an upgraded texture) Lite Rakata 01 Lite Republic Officer Male White Lite Republic Officer Female White Lite Selkath 01 Lite Sith Female Officer Lite Sith Male Officer Lite Sith Soldier Lite Swoop Gang 01 Lite Twilek Female Lite Twilek Male Lite Wookie Male Lite Wookie Female Note: if you're planning to use the Sith Soldier Texture Restoration alternate installation, install this mod first. Recommended mods: JC's Dense Aliens for K1 - ports a couple of the full-res models from K2 into the Lite models of K1. High Quality Spaceman - Improves the texture of the lite spaceman model I give permission to anybody to do whatever they like with this mod, with or without credit (but I mean c'mon...cool internet points, right guys?)
  9. 6 points

    Version 1.1

    517 downloads

    This mod replaces the model used for the Rakatan hologram to bring it more in-line with the style seen in the movies and TSL. It also now has lipsync, unlike the original model. Additionally, the placeable Rakatan holo statue has been changed, swapping the original 2D billboard for a 3D model, and again bringing the appearance in-line with other holograms. As of v1.1, the hologram in the Elder's compound has now been moved above the computer to an added hologram projector rather than standing in the hallway, and the static camera reoriented to suit. Pre-emptively compatible with changes to this module coming in v1.8 of the K1 Community Patch. To install, run TSLPatcher.exe. You can safely install if you already have v1.0 without removing any files. You will, however, need a save before entering the Elder's compound for the first time in order to see the changes take effect. Known Issues: During testing a crash was discovered during the Kashyyyk Star Map sequence. I believe this has been completely resolved, but if you encounter any such issues then you may need to add the "Disable Vertex Buffer Objects=1" line under [Graphics Options] in swkotor.ini The original holo statue uses a billboard VFX which always faces the camera. As such, the directional facing of the placeable is irrelevant. The switch to a 3D model results in a static facing, I set this to match the facing of the placeables used in the South Beach Elder's compound, but if this placeable is used elsewhere it may end up facing the wrong direction. If anyone spots such a case, let me know in the comments. Acknowledgements: Thanks to @bead-v for KOTORMax and MDLEdit, and for figuring out the skin vs trimesh hierarchy alpha crash issue Thanks to @JCarter426 and @jc2 for undertaking some testing to confirm the crash issue
  10. 6 points

    Version 1.00

    13,879 downloads

    this is a t3m4 skin I have had in the works for a little while now, my usual rules apply, use this however you'd like bu give me credit and a PM, all the disclaimers and stuff apply. thanks obsidian and bioware, NO thanks Disney. ps. I used the dds format, please keep it in dds, it's way more efficient and I noticed next to no quality loss.
  11. 6 points

    Version 1.0.1

    335 downloads

    This mod replace the vanilla Ajunta Pall's voice with the "Legends" version. # Background # The main motivation of this mod was, for me personally; to have me enjoy VarsityPuppet's "Spectral Ajunta Pall Canonical Appearance", to the most immerse experience I could have. So, I fiddled around with the vanilla voices to have me get that spectral feeling inside the tomb. # About this Mod # Inside this mod are 59 edited voice-overs of Ajunta Pall, using the game original files as the base voice to work with. [Updated in v1.0.1] # Final Remarks # I suggest you to install VarsityPuppet's "Spectral Ajunta Pall Canonical Appearance" first, and then install this mod after. This mod aims to complete the Ajunta Pall's spectral ambience part. Critiques, comments, suggestions, questions and any feedbacks for the next update are very much appreciated- just PM me or write a public message on my feed. And thank you! for downloading, and playing this mod. Hope you enjoy the mod as much as I do! Installation: Run the installer [TSLPatcher.exe]. Uninstallation: Run the "Uninstall: Vanilla Ajunta Pall's Voice" option from the installer directory. Compatibility: Will not be 100% compatible with VarsityPuppet's "Spectral Ajunta Pall Canonical Appearance", as VP's mod also include VOs replacement upon installing. To make this mod compatible, install this mod after VP's to have the intended effect. This mod will only affect the voice of Ajunta Pall. Redistribution: You can redistribute this mod or re-release it on any website; all I'm asking was just not to take credits for it. You don't have to ask for permission, but I do appreciate all the kind intention. Also, if you are planning to use the assets from this mod to a mod you will be developing, don't forget to give credits to BioWare & LucasArts, as inside this mod are their base assets too. All said and done, credits to my name is always a welcome, welcome. Credits: [Updated in v1.0.1] DarthParametric for the past-present knowledge which allows me to create any customs for the game, and his guidance on working with the installer. DarthParametric again, for the "addheader.bat"- which tools have been proven very useful to re-compressed the .WAV files. VarsityPuppet for the permission to have "Spectral Ajunta Pall Canonical Appearance" stand-out-ly featured in the preview. VarsityPuppet again, for inspiring me with the amazing "Spectral Ajunta Pall Canonical Appearance", and later for his input which enabled me to have the .WAV files compressed to micro-sized ones in v1.0.1, and resulting in better blend with the game- all but goodness. BioWare & LucasArts for the 'Game of the 21st Century'. All streamers on DeadlyStream which indirectly involved on this project that I couldn't possibly mentioned one by one. All modders either active or inactive. stoffe and Fair Strides for the TSLPatcher setup. DeadlyStream for a place to hangout and to discuss. -eb v1.0 Preview [featuring VarsityPuppet's "Spectral Ajunta Pall Canonical Appearance"]. v1.0.1 Preview [Under Development]
  12. 6 points

    Version 2.0

    333 downloads

    *************************** Knights of the Old Republic *************************** TITLE: Effixian's PMHC04 from K2 to K1 AUTHOR: Effix(ian) CONTACT: PM me on the forums or find me on Steam ************ DESCRIPTION ************ This mod replaces PMHC04 (a.k.a. "Mullet Man") with PMHC04 from KotOR 2 (a.k.a. "Jesus"). As requested by KohlKatarn & valten7. ************* INSTALLATION ************* Unzip. Copy the files inside the folder to your game's Override folder. ***** BUGS ***** None known. ************* UNINSTALLING ************* Remove from the Override folder: - pmhc04.mdl - pmhc04.mdx - PMHC04.tga - PMHC04A.tga - PMHC04d.tga - PMHC04d1.tga - PMHC04d2.tga - PMHC04d3.tga - PO_pmhc4.tga - PO_pmhc4d.tga - PO_pmhc4d1.tga - PO_pmhc4d2.tga - PO_pmhc4d3.tga ******************* DISTRIBUTION NOTES ******************* You may not: Use the material from this mod in your own mod without giving me credit, implying it was your creation. You might: Use the material from this mod in your own mod if you simply ask me. ********* THANKS TO ********* - Fred Tetra's Kotor Tool - bead-v's MDLEdit - JCarter426 & Kexikus for sharing their knowledge of converting things with MDLEdit ------------------- THIS MODIFICATION IS NOT MADE, DISTRIBUTED, OR SUPPORTED BY BIOWARE, OBSIDIAN, OR LUCASARTS ENTERTAINMENT COMPANY LLC. ELEMENTS TM & © LUCASARTS ENTERTAINMENT COMPANY LLC AND/OR ITS LICENSORS.
  13. 6 points

    Version 1.0.0

    563 downloads

    This mod alters the (frankly terrible) holograms used in the cutscenes prior to boarding the Star Forge at the end of KOTOR to bring them more in to line with the style seen in the movies and TSL. For some unknown reason, Bioware decided to go with a weird texture-based approach that simultaneously looks both horrible and nothing like how Star Wars holograms are typically depicted. Before: After: Changes: Admiral Dodonna hologram model completely replaced with a new one based on her regular appearance. No longer has incorrect mirrored torso UVs. Dodonna model split into sub-meshes for optimal hierarchical occlusion. Vandar model given some mesh tweaks to remove some intersection issues. Models now use mesh-based transparency rather than additive texture blending. Custom keyframes added to animations to facilitate mesh-based alpha approach and added meshes. New animated textures for Vandar and Dodonna created based on their regular appearance textures. Minor alteration to one shot during the DS cutscene to prevent Dodonna leaping out of frame while Vandar is speaking. Known Issues: Because meshes do not self-occlude, there are some artefacts during certain shots. For example, seeing the neck through the chin. Acknowledgements: Thanks to @bead-v for KOTORMax and MDLEdit Thanks to @ndix UR for MDLops
  14. 6 points

    Version 1.0

    183 downloads

    This mod alters Canderous' appearance, porting the unused texture from K2 to be used in K1.
  15. 5 points

    Version 1.4

    616 downloads

    Summary This mod replaces the lightsaber blade textures. I've made new textures using Saber, a plug-in for After Effects made by visual effect artists who work on the actual films, which they released for free on VideoCopilot.net. The new textures are of higher quality (1024x1024 vs the original 128x128) and should be more accurate to the movie look, given that they were generated with a tool made by movie people. I've adjusted some of the blade colors; I mainly used math to choose them, placing them at even distributions along the color spectrum, and sticking with the plug-in's default setting for blue. In more practical terms, this means yellow is a bit yellower, while green and violet are closer to the blue end. Blue itself is much brighter than the original. Orange and cyan are no longer reused copies of the Heart of the Guardian and Mantle of the Force colors from K1. They both look more like standard lightsaber blades. Orange's blade color falls exactly between red and yellow - you know, actually orange. Cyan and viridian are evenly placed between blue and green. Silver uses the same color settings as blue, but at 33% saturation. I've added an alternate optional texture to have the viridian blade more closely resemble the original, if you would prefer. Video Preview Installation Copy the files from Override to your own Override folder (if you don't have one, make one). Optionally, copy the file from the Alternate Textures folder to your Override folder, replacing the previously-installed file. This will change the viridian blade to more closely resemble the original. Optionally, if you use the Ultimate Saber Mod, copy the files from the USM New Colors folder to your Override folder, replacing the previously-installed files. This gives all colors added in USM the same upgrade for visual consistency. Uninstallation Remove the installed files. Compatibility This mod should be compatible with any mods that add or alter lightsaber hilts, assuming the use the orginal game textures for the blades. This mod is not compatible with other mods that alter the lightsaber blade textures, including my own past mods. Permissions I hereby grant nobody except myself permission to upload some or all of this mod anywhere for any reason. For any reason. If you would like to include any part of this mod in anything, then please contact me for permission. Credits KOTOR Tool – Fred Tetra Saber – Andrew Kramer & VideoCopilot.net
  16. 5 points

    Version 1.1

    391 downloads

    Summary This is a collection of various things that I found annoying enough to alter. I collect things that I don't think warrant their own mods into a single mod, to be released to the general public when it becomes more substantial. Contents I've divided this mod into five categories: Straight Fixes, Bug Fixes, Resolution Fixes, Aesthetic Improvements, and Things What Bother Me Fixes. Straight Fixes are fixes for issues I think are genuine errors or mistakes or oversights or what have you. There's a problem, here's a fix for it. No artistic license is involved. Bug Fixes really fall under straight fixes but I've separated them into their own category because they're more severe and there's absolutely no reason not to have them. They fix bugs that could potentially break your game. What I've included are either well known and easy for me to do a quick fix or came to my attention directly. There are lots of other bugs this mod doesn't fix, so I strongly suggest that you seek out a more extensive bug-fixing mod. Resolution Fixes are all textures from the game for which there were identical, higher resolution textures somewhere else in the game files. So I've swapped the lower resolution ones for the higher resolution ones. I've separated these from the straight fixes because a) I didn't make any of the content here - it's all extracted from the game, and b) they don't actually fix "problems" per se - it's just an increase in resolution. It looks the same, with slightly more pixels. Aesthetic Improvements are my attempts to improve the visual quality in certain areas. I've tried to maintain the original aesthetic of the game while improving the quality. But the nature of the improvements necessitates new content created by me. You might not like my work, or you might use a different mod that touches on these areas, or whatever, so I've isolated these from the other fixes. Things What Bother Me Fixes fix things what bother me. They might not bother you but they bother me, so I've isolated those as well. For a full release history, see the accompanied file.
  17. 5 points

    Version 1.1

    801 downloads

    This mod replaces the lightsaber blade textures. I've made new textures using Saber, a plug-in for After Effects made by visual effect artists who work on the actual films, which they released for free on VideoCopilot.net. The new textures are of higher quality (1024x1024 vs the original 128x128) and should be more accurate to the movie look, given that they were generated with a tool made by movie people. I've adjusted some of the blade colors; I mainly used math to choose them, placing them at even distributions along the color spectrum, and sticking with the plug-in's default setting for blue. In more practical terms, this means yellow is a bit yellower, while green and violet are closer to the blue end. Blue itself is much brighter than the original. I've included two install options for the Heart of the Guardian and Mantle of the Force colors. The default is my approximation of the original game textures, while the Alternate Textures folder has them changed to look more like standard lightsaber blades since I had to do them anyway for the K2 version. Heart becomes orange and Mantle becomes cyan, if you choose this option.
  18. 5 points

    Version 0.1.0

    303 downloads

    This mod replaces the vanilla and/or the installed placeables texture with the specularity-tweaked vanilla placeables texture. # Background # The primary motivation of this mod is to get the most of vanilla textures, by tweaking their alpha channel to have them showing their best shades and reflections. # About this Mod # Inside this version are 13 specularity-tweaked vanilla placeables textures. # Final Remarks # This mod performs at best with the vanilla state of the game, particularly with area textures. As all the assets inside this mod are using vanilla textures that was extracted using the KotOR Tool. Critiques, comments, suggestions, questions and any feedbacks for the next update are very much appreciated- just PM me or write a public message on my feed. And thank you! for downloading, and playing this mod. Hope you enjoy the mod as much as I do! Installation: I suggest you to manually removes any TGA/DDS files inside the 'Override' folder that are using the same name with the files that comes with the mod first. Because if they're on TGA/DDS, the installer can not patch them. But if they were on TPC or you are running a clean install playthrough, you could just run the installer straight-forwardly [TSLPatcher.exe]- as any files with the same name will be backed-up automatically. Uninstallation: Remove the installed files from the 'Override" folder or replaces them with the files stored in the 'Backup' folder [if generated]. Compatibility: Will not be compatible with any mods that using the same name for the assets. This mod perform at best with the vanilla state of the game, particularly with the area textures. As all the assets inside the mod are using vanilla textures that was extracted using the KotOR Tool. Redistribution: You can redistribute this mod or re-release it on any website; you don't have to ask for permission, but I do appreciate all the good intention. Also, if you are planning to use the assets from this mod to a mod you will be developing, don't forget to give credits to BioWare & LucasArts, as inside this mod are their base assets. Anyway, a credit to me is always a welcome, welcome. Credits: DarthParametric for the past-present knowledge which allows me to create any customs for the game. Fred Tetra for the 'amazing' KotOR Tool. bead-v and ndix UR for the MDLedit. ndix UR again, for the tga2tpc. stoffe and Fair Strides for the TSLPatcher setup. All streamers on DeadlyStream which indirectly involved on this project that I couldn't possibly mentioned one by one. All modders either active or inactive. DeadlyStream for a place to hangout and to discuss. -eb
  19. 5 points

    Version 1.0.0

    638 downloads

    The main purpose of this mod is to fix many of the party models that have uvw errors. Some of these errors may be too small to see in-game, but most become glaring when using some of the HD texture mods here on this site. The only HD texture that I have included here, is for Bastila Shan's head model (P_BastilaH04) which is now 2048x2048 pixels. I have tried to remain true to her original look. The models that I have fixed, and are included, are: default clothes models for Bastila Shan Canderous Ordo Carth Onasi Jolee Bindo Juhani Mission Vao HK-47's whole body model head models for Bastila and Carth HD head texture for Bastila head texture for Jolee (to fix the mustache) two additional clothes textures for Carth Each of these character's files can be used separately, so that the user has the option of mixing and matching with other mods. Many of the screenshots are animated with before/after scenes that flip every 7 seconds. There are included text files with much more detail as to what has been fixed in each. There are also a few files included that other modders can use for helping their own texture mods (some uvw maps and a few Photoshop psd files with multiple layers already separated).
  20. 5 points

    Version 1.0.1

    500 downloads

    This mod adds the head model of the “Jedi Entity” AKA the Jedi Exile AKA Meetra Surik from The Old Republic MMO, ported to TSL as a selectable player head for female characters. A few notes: While aligned as closely as possible, the neckline probably won't match perfectly. Expect some visible gaps on body models that don't hide the join. The TOR head models use separate textures for the face, eyes, and hair. In order to allow for DS transitions, these had to be merged together (and the UVs adjusted to match). The eyes are the big loser in this. They went from having their own dedicated 256x256 texture to being shrunk down to a corner where they could be squeezed in. An additional consequence of the texture merge is no normal maps, due to the hair requiring alpha masking. TOR heavily relies on tint mapping textures for variation - skin tone, hair colour, eye colour, etc. Unfortunately, while the tint colours are available in the material files, the specifics of their shaders are currently unknown to me, so the best I can do is experiment with various blend modes to approximate the look. It may require some further experimentation and kludging. Not even having specularity, much less the advanced (by comparison) graphical features of TOR, expect textures to look pretty flat by comparison to the originals. KOTOR has a maximum bone limit per mesh of 16. This creates a problem for TOR meshes, as adding the eyelids to the face bone array pushes that to 18. I had to drop 2 bones to make it work. I chose the two nose corner bones, as they seemed the least important. I don't know what effect this may have on various facial animations though. The hair meshes are currently completely rigid. Possibly I may add a danglymesh version in a future update. Dark Side transitions are included, but they are relatively mild. I'm not a big fan of the zombie look. Installation: If you are using TSLRCM or the hybrid TSLRCM + M4-78 from the Steam Workshop, make sure to choose its Workshop folder as the installation location, not the main game folder. Acknowledgements: Original models and textures ported from The Old Republic MMO Thanks to @bead-v for KOTORMax and MDLEdit Thanks to @ndix UR for TGA2TPC Thanks to zaramot on the Xentax forums for the TOR GR2 Max import script
  21. 5 points

    Version 1.0.0

    221 downloads

    This mod adds the head model of a Pureblood Sith from The Old Republic MMO as a selectable player head for male characters. N.B. Some screenshots feature @ndix UR's KOTOR High Resolution Menus A few notes: While aligned as closely as possible, the neckline probably won't match perfectly. Expect some visible gaps on body models that don't hide the join. The TOR head models use separate textures for the face, eyes, and hair. In order to allow for DS transitions, these had to be merged together (and the UVs adjusted to match). The eyes are the big loser in this. They went from having their own dedicated 256x256 texture to being shrunk down to a corner where they could be squeezed in. An additional consequence of the texture merge is no normal maps, due to the hair requiring alpha masking. TOR heavily relies on tint mapping textures for variation - skin tone, hair colour, eye colour, etc. Unfortunately, while the tint colours are available in the material files, the specifics of their shaders are currently unknown to me, so the best I can do is experiment with various blend modes to approximate the look. It may require some further experimentation and kludging. Not even having specularity, much less the advanced (by comparison) graphical features of TOR, expect textures to look pretty flat by comparison to the originals. KOTOR has a maximum bone limit per mesh of 16. This creates a problem for TOR meshes, as adding the eyelids to the face bone array pushes that to 18. I had to drop 2 bones to make it work. I chose the two nose corner bones, as they seemed the least important. I don't know what effect this may have on various facial animations though. Dark Side transitions are included, but they are relatively mild. I'm not a big fan of the zombie look. A unique underwear model is included, but the join line between the body and head is very apparent. I gather TOR is doing something to blend the join seamlessly, but I’m not able to replicate it. Acknowledgements: Original models and textures ported from The Old Republic MMO Thanks to @bead-v for KOTORMax and MDLEdit Thanks to @ndix UR for TGA2TPC and normal map normalizer tool Thanks to zaramot on the Xentax forums for the TOR GR2 Max import script
  22. 5 points

    Version 1.0.0

    328 downloads

    This mod is a small fix for a couple of wall panels in the entranceway of the Taris Upper City cantina. For some reason the mesh for this particular pair of panels was split off into a different model from the rest of the room. More importantly, it was assigned a lightmap that doesn't exist, thus it appears black in-game. To solve this, a duplicate of the adjoining panels was added to the entranceway room model in the appropriate position and the original mesh removed. To install, simply drop the MDL/MDX files into your Override. Compatibility: Won't be compatible with any other mods that edit those two room models, but the likelihood of that is low. Acknowledgements: Thanks to @bead-v for KOTORMax and MDLEdit Thanks to @ebmar for bringing the issue to my attention
  23. 5 points

    Version 1.0.0

    258 downloads

    A friend suggested that I upload these here since finding these darn things is quite a chore, and because the difference is honestly quite dramatic. It really is what it says on the tin. I took a bunch of Kotor 1 files and collected those that were downgraded for Kotor 2 (Obsidian literally saved them at a smaller resolution for no adequately explained reason other than perhaps to save resources for console release or because the engine was lagging) So, it's a quick texture swap. I've included a far more in-depth explanation for installing in the readme, but the gist is, you drop these in your override to install them and remove them from your override to uninstall them. I obviously take no credit for these nor do I claim any rights/give permissions in their usage. If you wish, I can provide a TXT document listing all of the textures for using your own Kotor 1 files instead of these.
  24. 5 points

    Version 1.0.0

    359 downloads

    Good afternoon. I was impressed with @JCarter426's "JC's Slave Bastila for K1 1.3". I could not resist, and I made a new texture in HD. Resolution 2048X2048. Increasing the resolution allowed to improve the quality of the texture and add detailed ornaments. The archive contains only textures. Installed on top of JC's Slave Bastila for K1 1.3 https://deadlystream.com/files/file/1299-jcs-slave-bastila-for-k1/?tab=comments
  25. 4 points

    Version 1.0

    4,009 downloads

    This mod changes the visual effects for all the laser blasts in the game. Energy blasters, ion blasters, disruptors, bowcasters - I've replaced them all. Except sonic, because really, sonic? In general, I've added more detail and made them match what's depicted on film as best as I could, when there was a visual reference. I took screenshots of the movies and got out my eyedropper tool and everything. The cores of the lasers are brighter so they look more like lasers, instead of having the whole thing as one flat color. I also messed around with light objects so each laser will illuminate surrounding objects in the appropriate color. For disruptors, I've included three color options: white, green, and yellow. The default install is white, like the original, and the other two are included as optional things.