Sign in to follow this  
Flying-gg

Unable to go to 222TEL

Recommended Posts

Hi ! I'm unable to go to second part of the citadel during the attack of the ravager. I tried to do it normally, but everytime, I just went back to the game menu, enable to do anything except leaving by the use of alt+f4. I tried to enable cheats then use the warp code : same problem. I started a new game then use the said warp code, again same problem.

 

1) During the game, when did the problem begin to occur?

When you're supposed to go to the 222TEL zone.

 

2) Did you install the latest version of the mod? (1.8.3b and 1.1b respectively)

Since my game is french I only installed TSLRCM 1.8.3b.

 

3) What version of the game do you have? (Steam, GOG, 4CD, KotOR Collection?) What region is the game designed for if it's the 4 CD version?

It is the 4CD version, for France (or european I guess).

 

4) Did you update your game as required by your game's region? (4-CD version ONLY)

I did all update prior installing TSLRCM.

 

5) Did you install this over the previous version(s), or did you perform a fresh installation as required by the TSLRCM's read-me file?

New computer, so new install !

 

6) What other mods have you installed? Please give an accurate list and provide links to each of these mods - even if they are found on this site. (We don't actually know them all!.)

TSL default replacement hilt mod megapack 8.0. (http://deadlystream.com/forum/files/file/496-tsl-default-replacement-hilt-mod/)

Prolog sensor droid fix (http://deadlystream.com/forum/files/file/430-prologue-sensor-droids-fix/)

TSL fixed profiency focus feat icons (http://deadlystream.com/forum/files/file/420-tsl-fixed-proficiencyfocus-feat-icons/)

Peragus mining gear (http://deadlystream.com/forum/files/file/401-peragus-mining-gear/)

Sion's arrival at Peragus 1.0 (http://deadlystream.com/forum/files/file/347-sions-arrival-at-peragus-high-resolution-movies/)

NPC overhaul mod 1.22 (http://deadlystream.com/forum/files/file/345-tsl-npc-overhaul-mod/)

Achilles TSL mod robes (TSLRCM edition) (http://deadlystream.com/forum/files/file/339-achilles-tsl-robe-mod-tslrcm-edition/)

Peragus galaxy map change (http://deadlystream.com/forum/files/file/336-peragus-galaxy-map-change/)

Widescreen UI fix for KOTOR2 : TSL 3.0 (http://deadlystream.com/forum/files/file/332-widescreen-ui-fix-for-knights-of-the-old-republic-2-the-sith-lords/)

New mandalorian banner fix (http://deadlystream.com/forum/files/file/146-new-mandalorian-banner-fix/)

TSL galaxy map fix (http://deadlystream.com/forum/files/file/28-tsl-galaxy-map-fix/)

Kill the ithorian 1.1 (http://deadlystream.com/forum/files/file/10-kill-the-ithorian/)

Don't remember where I found it but I'm also using a mod (by Shenn I think) hiding headgear.

I also installed music in high-res and the so called hi-res movies.

 

7) Can you be more specific about the error? At what point did it happen?

See introduction, everytime I should have the loading screen, I encounter this bug.

 

8) Have you tried re-downloading/re-installing the mod?

Nope, to tell the truth I'd rather avoid some hours of dowloading/re-installing... T_T

 

9) Have you tried using a different save game?

Yes, same issue.

 

10) Have you tried starting a new game?

Yes, for the same result. I only used a code to test it though, but using warp code work pretty fine, except the glitch it can trigger, of course. And I didn't use the console prior to this bug.

 

11) What Operating System do you use? (List Virtual Machines as well if you are using them.)

Windows 8, up to date.

 

12) Can you confirm that you see the TSLRCM logo on the the main menu screen?

Yes.

Share this post


Link to post
Share on other sites

I'm pretty sure that I had all of those mods (except for Achilles TSL robes and the saber hilt pack) installed last time I played TSL and I had no problems, so it shouldn't be caused by any of them :/ (The fixed icons mod is unnecessary by the way as that fix is included in TSLRCM as far as I know^^).

I don't think that the hilt pack can cause this issue as it only replaces models and you even tried warping there after starting a new game without a lightsaber. So my guess would be on the robe mod but I'd wait for some other opinions before you try and uninstall it.

Share this post


Link to post
Share on other sites

(The fixed icons mod is unnecessary by the way as that fix is included in TSLRCM as far as I know^^).

 

Technically true, although I did unify the blaster proficiency icons with the other ones, so they no longer point straight to the left, but at an angle, like the others.

 

I'm not sure about the galaxy map fix and its compatibility.

Share this post


Link to post
Share on other sites

Technically true, although I did unify the blaster proficiency icons with the other ones, so they no longer point straight to the left, but at an angle, like the others.

 

I'm not sure about the galaxy map fix and its compatibility.

 

In that case I'll continue to use the mod :)

 

And the galaxy map fix is perfectly fine with TSLRCM. I've always used it with no problems at all.

Share this post


Link to post
Share on other sites

The fixed icons mod is unnecessary by the way as that fix is included in TSLRCM as far as I know^^

 

It's not... while the mod changes things by altering the icons (many icons in override) I simply modified the feat.2da to display the right icons (hence only one file, one that was already modified by us anyway).

Using them together will cause the wrong order to appear again unless you manually alter the name of all icons (or use a non-TSLRCM feat.2da).

Share this post


Link to post
Share on other sites

Hi !

 

Sorry for the lack of answers, I was away from computer during hollidays. I tried uninstalling the robes mod (thought I did a whole playthrought on my old computer with it without any issue), and the problem is still here.

 

By the way, I tried to reinstall NPC overhaul on the said module (remembering something didn't go quitte well), and the installer on that specific module and only this one told me "an unhandled error has occured". Stupidly I didn't keep the unaltered file when I launched Kotor2 and saw that everything ran smoothly...

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this